Nick Baker

Dr. Nick Baker

Electrical Power, School of Engineering, Merz Court, Newcastle University, Newcastle upon Tyne, NE1 7RU, UK
orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 November 2018 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Nick BakerNick Baker
Nick Baker
MRMohammad A. H. Raihan
Mohammad A. H. Raihan
AAAhmed A. Almoraya
Ahmed A. Almoraya
In some wave energy converters, there is a need for linear electrical machines where all the active parts are mounted on the stator. For this reason the linear Vernier hybrid machine has been investigated. In other research, it is analyzed in 2D and assumed to have a flat cross-section. In this paper a cylindrical version of the Vernier hybrid machine is presented and analyzed. A geometrical model is used to investigate potential mass savings of the cylindrical version, and a finite element analysis design study is used to demonstrate a potential improvement in performance. A proof of concept laboratory scale model has been built and tested to validate the predictions.

4 October 2018 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Nick BakerNick Baker
Nick Baker
MRMohammad A. H. Raihan
Mohammad A. H. Raihan
AAAhmed A. Almoraya
Ahmed A. Almoraya
JBJoseph Burchell
Joseph Burchell
MMMarkus Mueller
Markus Mueller
This paper discusses the development of linear Vernier Hybrid Machines for use in wave energy converters. A number of topology options are explored to reduce magnet usage and improve performance for use as a linear generator. Consequent pole, V-shape and Halbach arrays are designed for a target 25kW specification. A discussion of overall cost of energy produced is used to justify using efficiency and power factor to asses fixed magnet mass topology variants. A power factor improvement from 0.38 to 0.72 is presented. Physical integration of the electrical machine into wave energy converters is considered including flooded experimental results of thermal behavior and polymer bearing wear.

27 December 2023 in Energies
Verified
Journal Article
Open access
PDF file
FMFarshid Mahmouditabar
Farshid Mahmouditabar
Nick BakerNick Baker
Nick Baker
In this paper, a sequential Taguchi method for design optimization of an induction motor (IM) for an electric vehicle (EV) is presented. First, a series of empirical and mathematical relationships is systematically applied to reduce the number of possible stator slot rotor bar (SSRB) combinations. Then, the admissible optimal combinations are investigated and compared using finite element (FE) simulation over the NEDC driving cycle, and the three best combinations are selected for further analysis. Each topology is optimized over the driving cycle using the k-means clustering method to calculate the representative working points over the NEDC, US06, WLTP Class 3, and EUDC driving cycles. Then, using the Design of Experiment (DOE)-based Taguchi method, a multi-objective optimization is carried out. Finally, the performance of the optimized machines in terms of robustness against manufacturing tolerances, magnetic flux density distribution, mechanical stress analysis, nominal envelope curve and efficiency map is carried out to select the best stator slot rotor bar combination. It is also found that the K-means clustering method is not completely robust for the design of electric machines for electric vehicle traction motors. The method focuses on regions with high-density working points, and it is possible to miss the compliant with the required envelope curve.

22 May 2019 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
AAAhmed A. Almoraya
Ahmed A. Almoraya
Nick BakerNick Baker
Nick Baker
KSKristopher J. Smith
Kristopher J. Smith
MRMohammad A. H. Raihan
Mohammad A. H. Raihan
In low speed applications, variable reluctance permanent magnet machines are often proposed due to their efficient use of magnet material and high torque density. This becomes even more important in large linear applications, where the translator is longer than the stator. Often, however, very low power factors are experienced by this class of machine. This paper proposes a V-shape flux concentrated version of a consequent pole linear Vernier hybrid permanent magnet machine and compares it to a surface mounted magnet variant. Using finite element analysis validated by two laboratory prototypes, it is shown that the flux concentrated version increases the airgap flux density, which potentially leads to an improvement in the force density and efficiency, or can be used to increase the operating power factor.

7 December 2023 in Energies
Verified
Journal Article
Open access
PDF file
FMFarshid Mahmouditabar
Farshid Mahmouditabar
Nick BakerNick Baker
Nick Baker
The manufacturing processing of Electrical Steel Laminations (ESLs) for electric machines comprises cutting, stacking, and housing techniques which can result in plastic deformation and residual stress in the soft magnetic material. These manufacturing processes result in decreasing the magnetic quality and a local increase in both the static and dynamic hysteresis losses near the cut edges and consequently a reduction in the performance of the designed motor. The iron losses resulting from cutting can vary by a factor of two or more depending on geometrical, material, and processing parameters as well as the magnetic field strength. It is advantageous to consider these manufacturing effects in the design stage to reduce the probability of underperforming mass production. In this paper, the manufacturing processes of ESLs and their modelling methods are comprehensively surveyed. The gaps in scientific understanding and the research need for the expansion of accurate modelling of the cutting and joining of ESLs are subsequently discussed.

14 August 2017 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Nick BakerNick Baker
Nick Baker
DSDaniel J. B. Smith
Daniel J. B. Smith
Mehmet KulanMehmet Kulan
Mehmet Kulan
STSimon Turvey
Simon Turvey
In this paper, a permanent magnet alternator which presently relies on magnetic slot wedges is redesigned to give lower iron loss. The new segmented stator design is used as the basis for a validated loss study-comparing bonded lamination stacks with those held together with a punched notch. Segmentation is shown to improve the production process, reduce losses, and remove the need for wedges, while not significantly altering the acoustic performance. In the first series of prototypes, however, where notching is used to secure lamination packs, the process is shown to have adversely affected material properties of the nickel iron laminations and overall measured losses increased. In the second prototype, with thinner laminations and glued stacks, iron loss predictions and measurement agree and are less than the present slot wedge design.