Conventional displacement sensors have limitations in practical applications. This paper develops a vision sensor system for remote measurement of structural displacements. An advanced template matching algorithm, referred to as the upsampled cross correlation, is adopted and further developed into a software package for real-time displacement extraction from video images. By simply adjusting the upsampling factor, better subpixel resolution can be easily achieved to improve the measurement accuracy. The performance of the vision sensor is first evaluated through a laboratory shaking table test of a frame structure, in which the displacements at all the floors are measured by using one camera to track either high-contrast artificial targets or low-contrast natural targets on the structural surface such as bolts and nuts. Satisfactory agreements are observed between the displacements measured by the single camera and those measured by high-performance laser displacement sensors. Then field tests are carried out on a railway bridge and a pedestrian bridge, through which the accuracy of the vision sensor in both time and frequency domains is further confirmed in realistic field environments. Significant advantages of the noncontact vision sensor include its low cost, ease of operation, and flexibility to extract structural displacement at any point from a single measurement.

A novel noncontact vision sensor for simultaneous measurement of structural displacements at multiple points using one camera is developed based on two advanced template matching techniques: the upsampled cross correlation (UCC) and the orientation code matching (OCM). While existing studies on vision sensors are mostly focused on the time-domain performance evaluation, this study investigates the performance in both time and frequency domains through a shaking table test of a three-story frame structure, in which the displacements at all the floors are measured by using one camera to track either high-contrast artificial targets or low-contrast natural targets on the structural surface such as bolts and nuts. Excellent agreements are observed between the displacements measured by the single camera and those measured by high-performance laser displacement sensors. The results of structural modal analysis based on the measurements by the vision sensor and reference accelerometers also agree well. Moreover, the identified modal parameters are used to update the finite element model of the structure, demonstrating the potential of the vision sensor for structural health monitoring applications. This study further examines the robustness of the proposed vision sensor against ill environmental conditions such as dim light, background image disturbance, and partial template occlusion, which is important for future implementation in the field. Significant advantages of the proposed vision sensor include its low cost (a single camera to remotely measure structural displacements at multiple points without installing artificial targets) and flexibility to extract structural displacements at any point from a single measurement. Copyright © 2015 John Wiley & Sons, Ltd.

To address the need for monitoring aging railway bridges, this paper presents a finite-element (FE) model updating approach using time-domain optimization based on in situ measurement of the bridge’s dynamic displacement histories under trainloads. Field tests are performed on a short-span plate girder railway bridge to measure its displacement response to freight trainloads with different speeds using a low-cost remote vision sensor recently developed by the authors’ group. A FE model of the bridge is developed considering train–track–bridge dynamic interactions. Sensitivity analysis is carried out to investigate the intrinsic effects of parameters of the train, track, and bridge subsystems on the dynamic response of the bridge. It is found that the bridge displacement response is primarily sensitive to the stiffness of the bridge, whereas the acceleration response is affected by many other parameters. This justifies that the bridge dynamic displacement is more suited than acceleration for updati...