This study presents an innovative design of a microtab system for aerodynamic load control on horizontal-axis wind-turbine rotors. Microtabs are small devices located near the trailing edge of the rotor blades and enable a rapid increase or decrease of the lift force through deployment of the tabs on the pressure or suction side of the airfoil, respectively. The new system has been designed to replace an earlier linearly-actuated microtab mechanism whose performance was limited by space restrictions and stiction. The newly-designed microtab system is based on a four-bar linkage that overcomes the two drawbacks. Its improved kinematics allows for the tab height to increase from 1.0% to 1.7% of the airfoil chord when fully deployed, thereby making it more effective in terms of aerodynamic load control. Furthermore, the modified four-bar link mechanism provides a more robust and reliable mechanical structure.
22 September 2004 in Journal of Magnetism and Magnetic Materials
A batch-fabricated microball lens array not only provides accurate coupling distances but also replaces traditional components such as aspheric lenses and expensive graded-index lenses without sacrificing performance and reduces assembly cost. The results of extensive experiments show a critical aspect ratio of ∼0.3. That is, when the aspect ratio is larger than 0.3, the final shape of a reflowed lens changes to that of a microball rather than of a mushroom. Using a laser with a 633-nm wavelength yields an optimum coupling distance of ∼8 μm with an insertion loss below -1.3 dB (coupling efficiency, ∼73%).