Target tracking using bearings-only measurements in passive mode operation of sonar is a crucial issue of underwater tracking. Target motion in underwater scenario is analyzed using bearings-only measurements and calculating parameters like range, course and speed of the target. This is called Target Motion Analysis (TMA). TMA process is highly non-linear as the measurements chosen are nonlinearly related to the selected target state vector and the traditional, optimal linear Kalman filter will not be appropriate to use. It is presumed that the target is moving in straight line path with constant velocity, so Extended Kalman Filter (EKF) is proposed in this paper. The algorithm is simulated for several scenarios using MATLAB. Monte-Carlo runs are performed to evaluate the capability of the algorithm.
Two sensor arrays, hull-mounted array, and towed array sensors are considered for bearings-only tracking. An algorithm is designed to combine the information obtained as bearing (angle) measurements from both sensor arrays to give a better solution. Using data from two different sensor arrays reduces the problem of observability and the observer need not follow the S-maneuver to attain observability of the process. The performance of the fusion algorithm is comparable to that of theoretical Cramer–Rao lower bound and with that of the algorithm when bearing measurements from a single sensor array are considered. Different filters are used for analyzing both algorithms. Monte Carlo runs need to be done to evaluate the performance of algorithms more accurately. Also, the performance of the fusion algorithm is evaluated in terms of solution convergence time.
1 October 2021 in International Journal of e-Collaboration
This research aims to find an appropriate approach to improve system accuracy in the Doppler-bearing tracking (DBT) problem for target estimation. The topic of DBT problem is to achieve a target trajectory using bearing and frequency measurements. The difficulty of DBT problem comes from the nonlinearity terms exposed in the measurement equations. The unscented particle filter approach is proposed to estimate the accuracy in the target motion parameters (TMP). This approach requires the observer maneuver so that the target trajectory is observable. Although in recent research papers, DBT has been proven to work efficiently without observer maneuver, TMP is unknown to the observer, and consequently, there is a need for observer maneuver. So, the algorithm is simulated with observer following s-maneuver and without any maneuver executed by the observer, and results are compared. The effectiveness of the solution and results are determined by using MATLAB simulation. It is shown that the truthfulness of the outcome is superior when the observer performs s-maneuver while compared to that without observer maneuver.
In passive target tracking, target motion parameters (TMP) i.e. range, course, and speed are estimated using bearing measurements. In the simulation mode, the accuracy of the estimated solution can be calculated, as true values are available. In the actual scenario, the true values of TMP are not readily obtainable. In this research, the focus is laid on the evolution of the acceptance criterion of the TMP in the actual scenario. Detailed mathematical modeling is carried out and an unscented Kalman filter (UKF) is used to estimate TMP. The state vector covariance matrix of UKF is utilized to express the errors in estimated TMP and an acceptance criterion is derived in terms of the standard deviation of errors in estimated TMP. Submarine to submarine tracking is carried out and scenarios are chosen accordingly. Several low angle on target bow (ATB) scenarios are used in the Monte-Carlo simulation and the results are presented. A similar procedure can be carried out for medium and high ATB scenarios and a submarine to ship or vice-versa passive target tracking.