This study aims to evaluate the potential of consortium biomass formation between Mucor circinelloides, an oleaginous filamentous fungal species, and Chlorella vulgaris, in order to promote a straightforward approach to harvest microalgal cells and to evaluate the lipid production in the consortium system. A synthetic medium with glucose (2 g·L−1) and mineral nutrients essential for both fungi and algae was selected. Four different inoculation strategies were assessed, considering the effect of simultaneous vs. separate development of fungal spores and algae cells, and the presence of a supporting matrix aiming at the higher recovery of algae cell rates. The results were evaluated in terms of consortium biomass composition, demonstrating that the strategy using a mature fungal mycelium with a higher algae count may provide biomass samples with up to 79% of their dry weight as algae, still promoting recovery rates greater than 97%. The findings demonstrate a synergistic effect on the lipid accumulation by the fungal strain, at around a fourfold increase when compared to the axenic control, with values in the range of 23% of dry biomass weight. Furthermore, the fatty acid profile from the samples presents a balance between saturated and unsaturated fatty acids that is likely to present an adequate balance for applications such as biodiesel production.
Lubricants are substances of the foremost importance in the modern world, as they are essential to the proper functioning of various mechanisms. Most lubricants, however, are still made from petroleum fractions. I light of this, and due to various environmental problems, the search for feasible biolubricants has become essential. This study obtained biolubricants through the in situ transesterification of microbial biomass, containing at least 20 wt% of lipids. The following two distinct biomasses were evaluated: the marine microalgae, Dunaliella salina, and the consortium of microalgae-fungi, Scenedesmus obliquus and Mucor circinelloides. Microbial oil from both biomasses presented a fatty acid profile with high amounts of oleic acid. The oil of D. salina had a lower content of polyunsaturated fatty acids relative to the microbial consortium profile, which indicates that this is a good configuration for increasing biolubricant oxidation resistance. The catalyst used was a Keggin-structure heteropolyacid supported on niobium, H3PMo12O40/Nb2O5, activated at 150 °C, which had high transesterification yields, notwithstanding the feedstocks, which were rich in free fatty acids. The performed transesterification reactions resulted in excellent yields, up to 97.58% and 96.80%, for marine microalgae and the consortium, respectively, after 6 h at 250 °C, with 10 wt% of catalyst (related to the lipid amount). As such, the (H3PMo12O40/Nb2O5) catalyst could become an attractive option for producing biolubricants from microbial biomass.
In this study, a lichen-like structure was obtained through the production of a unique biomass, formed by algae cells of Scenedesmus obliquus adhering to the mycelium of filamentous fungal Mucor circinelloides. This structure was composed in two steps; in the first one, microalgal cells and spores were incubated separately, and in the second one, after 72 h of growth, isolated, mature mycelium was harvested and added to cell culture. For spores’ incubation, a culture medium containing only 2 g·L−1 of glucose and minerals was used. This culture medium, with low sugar content, provided a fungal biomass to the anchorage of microalgae cells. WC medium was used without and with sugarcane molasses supplementation for microalgae cells’ incubation. The lichen-type structure that was formed resulted in 99.7% efficiency in the recovery of microalgae cells and in up to 80% efficiency in the recovery of algae biomass in the lichen biomass composition. In addition, the resulting consortium attained a satisfactory lipid accumulation value (38.2 wt%) with a balanced fatty acid composition of 52.7% saturated plus monounsaturated fatty acids and 47.4% polyunsaturated fatty acids. Since fungal species are easy to recover, unlike microalgae, the lichen-like structure produced indicates an efficient low-cost bioremediation and harvesting alternative; in addition, it provides an oleaginous biomass for various industrial applications.
As microalgas têm se tornado uma fonte promissora de energia renovável; além de fornecerem lipídios, carboidratos, proteínas, vitaminas e pigmentos, dentre outras diversas substâncias de alto valor agregado, contribuem enormemente para a redução do efeito estufa na atmosfera, ao consumirem o dióxido de carbono pela realização de fotossíntese. Os lipídios representam uma importante fonte de matéria prima para a obtenção de biocombustíveis, tal como o biodiesel. Um dos processos de obtenção de lipídios de excelente custo benefício é a extração via solventes, utilizando clorofórmio e metanol. Visando a obtenção do maior rendimento em lipídios por grama de biomassa, foram extraídos lipídios da biomassa da microalga marinha Chlorella minutíssima, empregando um arranjo ortogonal de Taguchi com o estudo simultâneo de quatro fatores que influenciam neste processo: umidade da biomassa, proporção entre os solventes, quantidade total de solventes utilizada e tempo de ultrassom para potencializar a quebra da parede celular, facilitando a liberação destes lipídios. Obteve-se um teor de 20% em lipídios, pelo emprego de uma biomassa com 64% de umidade, uma proporção de clorofórmio: metanol: água de 5,7: 3: 1, com um total de 33 mL de solventes e em apenas 70 minutos de ultrassom. Os lipídios extraídos foram transesterificados em biodiesel etílico via catálise ácida, obtendo-se uma conversão de 94,45%.