Lithium-ion batteries have found various modern applications due to their high energy density, long cycle life, and low self-discharge. However, increased use of these batteries has been accompanied by an increase in safety concerns, such as spontaneous fires or explosions due to impact or indentation. Mechanical damage to a battery cell is often enough reason to discard it. However, if an Electric Vehicle is involved in a crash, there is no means to visually inspect all the cells inside a pack, sometimes consisting of thousands of cells. Furthermore, there is no documented report on how mechanical damage may change the electrical response of a cell, which in turn can be used to detect damaged cells by the battery management system (BMS). In this research, we investigated the effects of mechanical deformation on electrical responses of Lithium-ion cells to understand what parameters in electrical response can be used to detect damage where cells cannot be visually inspected. We used charge-discharge cycling data, capacity fade measurement, and Electrochemical Impedance Spectroscopy (EIS) in combination with advanced modeling techniques. Our results indicate that many cell parameters may remain unchanged under moderate indentation, which makes detection of a damaged cell a challenging task for the battery pack and BMS designers.
18 March 2021 in Journal of Electrochemical Energy Conversion and Storage
This study details a framework for an iterative process which is utilized to optimize lithium-ion battery (LIB) pack design. This is accomplished through the homogenization of the lithium-ion cells and modules, the finite element simulation of these homogenized parts, and submodeling. This process enables the user to identify key structures and materials to be modified to optimize performance while keeping simulation time per iteration to a minimum. These iterations can be used to accurately estimate the force and strain values at various points including the lithium-ion cells and can be used to determine failure locations. The study demonstrates this through the examination of an electric bus lithium-ion battery pack as it is processed through the aforementioned steps and iterations to arrive at a conclusion that enabled the author to select appropriate fasteners and optimize for lithium-ion battery integrity in the event of a side impact with a pole on the bus chassis and battery assembly. The steps outlined in the study could be expanded to include an array of different loading scenarios and to include additional levels of homogenization/submodeling such as jellyroll components.
22 January 2021 in ASME Letters in Dynamic Systems and Control
Li-ion batteries are the preferred choice of energy storage in many applications. However, the potential for fire and explosion due to mechanical damage remains a safety concern. Currently, there are no criteria for the extent of the mechanical damage under which the batteries are safe to use. Here, we investigate the effects of bending damage to Li-ion cells on their impedance spectra. After the initial characterization of four Li-ion pouch cells, one of the cells underwent a three-point bending load. We measured the impedance spectra of this cell after each increment of loading. The impedance data of the control group cells were collected at the same intervals as the damaged cell. A distributed equivalent circuit model (dECM) was developed using the data from the electrochemical impedance spectroscopy (EIS) procedure. We observed that several model parameters such as the magnitude of constant phase elements had similar trends in the control cells and the bent cell. However, some model parameters such as resistances in parallel with constant phase elements, and the inductor showed dependency on the extent of the damage. These results suggest the potential for use of such parameters as an indicator of mechanical damage when visual inspection of cells is not possible in a battery pack setup. Future steps include investigation of similar trends for other commercial batteries and chemistries and form factors to verify the applicability of the current findings in a broader context.