The role of Pt on photocatalytic substrates such as TiO2 (P25) for the decomposition of organic pollutants is still controversial in the scientific community. The well-observed behavior of an optimum catalytic activity as a function of the Pt loading is usually explained by the shift from charge separation to charge recombination behavior of Pt clusters. However, experiments supporting this explanation are still lacking to give a concise understanding of the effect of Pt on the photocatalytic activity. Here, we present an experimental study that tries to discriminate the different effects influencing the photocatalytic activity. Using atomic layer deposition (ALD) in a fluidized bed reactor, we prepared TiO2 (P25) samples with Pt loadings ranging from 0.04 wt. % to around 3 wt. %. In order to reveal the mechanism behind the photocatalytic behaviour of Pt on P25, we investigated the different aspects (i.e., surface area, reactant adsorption, light absorption, charge transfer, reaction pathway) of heterogeneous photocatalysis individually. In contrast to the often proposed prolonged life-time of charge carriers in Pt loaded TiO2 , we found that after collecting the excited electrons, Pt acts more as a recombination center independent of the amount of Pt deposited. Only when dissolved O2 is present in the solution, charge recombination is suppressed by the subsequential consumption of electrons at the surface of the Pt clusters with the dissolved O2 benefited by the improved O2 adsorption on the Pt surface.
Graphene oxide (GO) has immense potential for widespread use in diverse in vitro and in vivo biomedical applications owing to its thermal and chemical resistance, excellent electrical properties and solubility, and high surface-to-volume ratio. However, development of GO-based biological nanocomposites and biosensors has been hampered by its poor intrinsic biocompatibility and difficult covalent biofunctionalization across its lattice. Many studies exploit the strategy of chemically modifying GO by noncovalent and reversible attachment of (bio)molecules or sole covalent biofunctionalization of residual moieties at the lattice edges, resulting in a low coating coverage and a largely bioincompatible composite. Here, we address these problems and present a facile yet powerful method for the covalent biofunctionalization of GO using colamine (CA) and the poly(ethylene glycol) cross-linker that results in a vast improvement in the biomolecular coating density and heterogeneity across the entire GO lattice. We further demonstrate that our biofunctionalized GO with CA as the cross-linker provides superior nonspecific biomolecule adhesion suppression with increased biomarker detection sensitivity in a DNA-biosensing assay compared to the (3-aminopropyl)triethoxysilane cross-linker. Our optimized biofunctionalization method will aid the development of GO-based in situ applications including biosensors, tissue nanocomposites, and drug carriers.
Thermal atomic layer deposition of Au nanoparticles on titania in a fluidized bed reactor. Effects of precursor pulse time on Au nanoparticle size and loading.
16 March 2022 in Chemical Engineering Journal Advances
This work presents the evaluation of the photocatalytic activity of P25 TiO2 particles, coated with SiO2, using atomic layer deposition (ALD) for the photocatalytic removal of methylene blue, oxidation of methanol and inactivation of Escherichia coli bacteria in water and its comparative evaluation with bare P25 TiO2. Two different reactor configurations were used, a slurry reactor with the catalyst in suspension, and a structured reactor with the catalyst immobilized in macroporous foams, that enables the long-term operation of the process in continuous mode, without the necessity of separation of the particles. The results show that the incorporation of SiO2 decreases the efficiency of the photocatalytic oxidation of methanol, whereas a significant improvement in the removal of methylene blue is achieved, and no significant changes are observed in the photocatalytic inactivation of bacteria. Adsorption tests showed that the improvements, observed in the removal of methylene blue by the incorporation of SiO2, was mainly due to an increase in its adsorption. The improvement in the adsorption step as part of the global photocatalytic process led to a significant increase in its removal efficiency. Similar conclusions were reached for bacterial inactivation where the loss of photocatalytic efficiency, suggested by the methanol oxidation tests, was counteracted with a better adherence of bacteria to the catalyst that improved its elimination. With respect to the use of macroporous foams as support, a reduction in the photocatalytic efficiency is observed, as expected from the decrease in the available surface area. Nevertheless, this lower efficiency can be counteracted by the operational improvement derived from the easy catalyst reuse.
The depletion zone formed around the CuxO clusters is the main photocatalytically active area, and the H2 production rate depends on surface coverage with this area; however, the overlap of these areas suppresses the photocatalyst activity.