Senior Lecturer / School of Mechanical and Mining Engineering Senior Research Fellow / Australian Institute for Bioengineering and Nanotechnology (AIBN), The University of Queensland, Brisbane, QLD 4072, Australia
Dr. Shahriar A. Hossain
Senior Lecturer / School of Mechanical and Mining Engineering Senior Research Fellow / Australian Institute for Bioengineering and Nanotechnology (AIBN), The University of Queensland, Brisbane, QLD 4072, Australia
Conductive polymers are attractive organic materials for future high-throughput energy storage applications due to their controllable resistance over a wide range, cost-effectiveness, high conductivity (>103 S cm−1), light weight, flexibility, and excellent electrochemical properties. In particular, conductive polymers can be directly incorporated into energy storage active materials, which are essential for building advanced energy storage systems (ESSs) (i.e. supercapacitors and rechargeable batteries). This review summarizes the synthesis of conductive polymers with different chemical structures in various ways and also addresses their widespread applications for a broader range of ESSs. Moreover, we introduce recent progress in ESS development, including new electroactive polymers, new approaches (i.e. flexible, stretchable, binder-free, hybrid, etc.), and new functions (e.g. color changeable electrochromic materials for displays).
Metal–organic frameworks (MOFs) have gained significant attention as precursors for the fabrication of porous hybrid materials due to their highly controllable composition, structure and pore size. However, at present, MOF-derived materials have rarely been investigated as anode materials for sodium-ion batteries. In this work, we report the fabrication of a Ni-doped Co/CoO/N-doped carbon (NC) hybrid using bimetallic Ni–Co-ZIF as the starting precursor. The resulting Ni-doped Co/CoO/NC hybrid is highly microporous with a high specific surface area of 552 m2 g−1. When employed as an anode material for sodium-ion batteries, the Ni-doped Co/CoO/NC hybrid exhibited both good rate performance with a high discharge capacity of 218 mA h g−1 at a high current density of 500 mA g−1 and good cycling stability, as a high discharge capacity of 218.7 mA h g−1 can be retained after 100 cycles at 500 mA g−1, corresponding to a high capacity retention of 87.5%. The excellent electrochemical performance of the Ni-doped Co/CoO/NC hybrid for SIBs may be attributed to the synergistic effects of various factors, including: (i) the presence of a carbon matrix which provides protection against aggregation and pulverization during sodiation/desodiation; (ii) the highly microporous nature along with the presence of a few mesopores which facilitates better insertion/de-insertion of Na+ ions; (iii) the Ni-doping which introduces defect sites into the atomic structure of CoO via partial substitution, thus enhancing the conductivity of the cobalt oxide (CoO) component and hence, the overall hybrid material, and (iv) the N-doping which promotes a faster migration speed of sodium ions (Na+) across the carbon layer by creating defect sites, thereby improving the conductivity of the carbon frameworks in the hybrid material.
There has recently been a major thrust toward advanced research in the area of hierarchical carbon nanostructured electrodes derived from cellulosic resources, such as cellulose nanofibers (CNFs), which are accessible from natural cellulose and bacterial cellulose (BC).