En la presente investigación se realizó el estudio del comportamiento del almidón extraído de los residuos del banano dosificado en una matriz polimérica termoestable como es el Policaprolactona (PCL), con el objetivo de determinar cuáles son los mejores parámetros para extracción del almidón y la formulación adecuada para la dosificación. Para el cumplimiento de este objetivo se extrajo el almidón de los residuos de la cascara del banano y a éste polisacárido, modificarlo mediante la acetilación. Posteriormente se comparó los dos tipos de almidones (almidón sin modificar y modificado) mediante la espectroscopia infrarroja (IR), donde se observó que el espectro del almidón sin modificar en comparación con el almidón modificado existe una disminución en las bandas correspondiente a las vibraciones por estiramiento y por flexión de los grupos hidroxilo (O-H) entre 3000 y 3700 cm-1, lo que significa que se ha realizado la acetilación. Este almidón analizado se dosificó en una cantidad del 10% con policaprolactona analizando la temperatura de transición vítrea siendo el valor mayor de 33°C en la dosificación con el almidón modificado, temperatura de fusión resultando un valor de 66,4 °C en la dosificación con almidón modificado y además el grado de reticulación de las dos dosificaciones, siendo el más representativo la matriz polimérica con almidón sin modificar con un valor cercano al 12%; indicándonos que ésta dosificación es la mas adecuada.
Polylactic acid (PLA) is a renewable biopolymer that has attracted considerable interest due to its ability to replace petroleum-based synthetic polymers, thereby offering a more sustainable alternative to global environmental concerns. This study focused on evaluating the effect of catalyst concentration and reaction time on the efficiency of PLA synthesis via the Ring-Opening Polymerization (ROP) technique. The process involved a lactic acid esterification stage (using 88% lactic acid) to obtain lactide, employing 40% and 60% (v/v) sulfuric acid concentrations, followed by polymerization at various reaction times (10, 15, 20, and 30 min). Analysis of variance (ANOVA) results revealed that the 40% catalyst concentration had a statistically significant effect on polymer yield (p = 0.032), whereas reaction time showed no statistical significance (p = 0.196), although the highest yields were recorded at 10 and 15 min. Fourier Transform Infrared Spectroscopy (FTIR) confirmed the presence of the characteristic functional groups of PLA, and Differential Scanning Calorimetry (DSC) revealed a semi-crystalline structure with a high melting temperature, indicating good thermal stability. These results validate the viability of PLA as a functional and sustainable biopolymer.
Cellulose, a widely available and biodegradable biopolymer, is a promising alternative to petroleum-derived plastics due to its sustainability and versatility. This study explores the extraction of cellulose from banana pseudocores and its transformation into cellulose xanthate, which was then combined with polyvinyl alcohol (PVA) to develop a novel biopolymer with enhanced mechanical properties. The synthesis process involved acid and alkaline hydrolysis, bleaching, and chemical modification with carbon disulfide and sodium hydroxide, followed by controlled acid hydrolysis. The resulting biopolymer was characterized using Fourier-transform infrared spectroscopy (FTIR), Shore hardness, and tensile strength tests. Results demonstrated an average hardness of 70.33 Shore, a tensile strain of 1.701 N/mm2, and an average tensile strength of 21.60 N, confirming its mechanical viability. These findings highlight the potential of cellulose-derived biopolymers as eco-friendly materials for sustainable packaging and biodegradable applications, contributing to the reduction of plastic pollution.
La conservación del medio ambiente ha llevado a investigar algunos polisacáridos con el objetivo de obtener bioplásticos que puedan ser dosificados con otros polímeros y tener mejores propiedades. En esta investigación, se realizó un estudio termo mecánico de dosificaciones entre el ácido poliláctico obtenido del almidón con otro polímero tipo poliéster alifático denominado polibutileno socianato adipato. Se realizaron diferentes mezclas y análisis tales como: análisis diferencial de barrido, termogravimétrico, espectroscopia infrarroja, índice de fluidez, dureza "SHORE" y un mecánico termodinámico; y en base a los resultados obtenidos, se determinó el tipo de procesamiento que puede sufrir la dosificación. Las dosis realizadas fueron desde 94,5% de PLA con 5% de PBSA hasta 20% de PLA con 79,5% de PBSA añadiendo 0,5% de crodamida como agente lubricante. Los resultados concluyeron que el bioplástico puede ser procesado por extrusión y termoformado, debido a que los valores del índice de fusión son relativamente bajos
Polylactic acid (PLA) is a renewable biopolymer that has attracted considerable interest due to its ability to replace petroleum-based synthetic polymers, offering a more 2 sustainable alternative to global environmental problems. The present study focused on evaluating the effect of catalyst concentration and reaction time on the efficiency of 4 PLA synthesis using the ROP (Ring-Opening Polymerization) technique. The process included a lactic acid esterification stage (88%) to obtain lactide, using sulfuric acid in 6 concentrations of 40% and 60%, followed by polymerization under different times (10, 15, 20, and 30 minutes). The results of the analysis of variance (ANOVA) revealed that the 8 40% catalyst concentration had a statistically significant effect on polymer yield (p = 0.032), while reaction time showed no statistical significance (p = 0.196), although the highest yields were recorded at 10 and 15 minutes. FTIR analysis confirmed the presence of the characteristic functional groups of PLA, and DSC tests showed a semi-crystalline structure with a high melting temperature, indicating good thermal stability. These results validate the viability of PLA as a functional and sustainable biopolymer.
Plastic pollution caused by synthetic polymers is a global concern demanding environmentally friendly alternatives. This study presents the development of a thermoformable bioplastic composed of shrimp-derived chitin, corn starch, sugarcane bagasse, glycerol, and acetic acid, integrated with polyethylene terephthalate (PET) and maleic anhydride as a compatibilizer. The composite underwent mechanical, thermal, and biodegradability assessments. The formulation containing 5% chitin achieved a tensile strength of 0.833 MPa and a density of 2780 Kg/cm3, highlighting its mechanical viability. Under controlled composting conditions, degradation was observed in 120 days. Although the primary polymer matrix consists of petroleum-based PET, the term "bioplastic" is justified by the presence of renewable constituents and proven biodegradability, following the definition by European Bioplastics. This structure supports partial replacement of fossil-derived plastics while promoting sustainable waste management. The study underscores the potential of integrating agro-industrial residues into polymeric systems aimed at contributing to circular economy in material science.