Currently, the availability of a wide variety of universal adhesives makes it difficult for clinicians to choose the correct system for specific bonding situations to dentin substrate. This study aimed to determine whether there are any alternative techniques or additional strategies available to enhance the bond strength of universal adhesives to dentin through a systematic review and meta-analysis. Two reviewers executed a literature search up to September 2020 in four electronic databases: PubMed, ISI Web of Science, Scopus, and EMBASE. Only in vitro studies that reported the dentin bond strength of universal adhesives using additional strategies were included. An analysis was carried out using Review Manager Software version 5.3.5 (The Nordic Cochrane Centre, The Cochrane Collaboration, Copenhagen, Denmark). The methodological quality of each in vitro study was assessed according to the parameters of a previous systematic. A total of 5671 potentially relevant studies were identified. After title and abstract examination, 74 studies remained in systematic review. From these, a total of 61 studies were included in the meta-analysis. The bond strength of universal adhesives to dentin was improved by the use of one of the following techniques: Previous application of matrix metalloproteinases (MMP) inhibitors (p < 0.001), prolonged application time (p = 0.007), scrubbing technique (p < 0.001), selective dentin etching (p < 0.001), non-atmospheric plasma (p = 0.01), ethanol-wet bonding (p < 0.01), prolonged blowing time (p = 0.02), multiple layer application (p = 0.005), prolonged curing time (p = 0.006), and hydrophobic layer coating (p < 0.001). On the other hand, the use of a shortened application time (p = 0.006), and dentin desensitizers (p = 0.01) impaired the bond strength of universal adhesives to dentin. Most of the analyses performed showed a high heterogenicity. The in vitro evidence suggests that the application of universal adhesives using some alternative techniques or additional strategies may be beneficial for improving their bonding performance to dentin. This research received no external funding. Considering that this systematic review was carried out only with in vitro studies, registration was not performed.

The central aim of adhesive dentistry is to improve the compatibility between current adhesives and a range of substrates by employing diverse application techniques. Therefore, the overarching objective of this review is to offer a comprehensive analysis of dentin bonding systems, starting with an introduction to adhesion and a detailed overview of enamel and dentin structures, their histology, and the impact of dentin structure on resin–dentin bonding. It covers the mechanisms of resin–dentin bonding, including resin adhesive application, bonding mechanisms, and factors influencing efficacy. Further, this review explores the composition of resin adhesive systems, including acidic components, cross-linking monomers, solvents, and other critical elements. It also examines various adhesive strategies—etch-and-rinse, self-etch, and universal adhesives—highlighting their applications and advantages. The review extends to clinical applications of dental adhesion, including direct restorations, indirect restorations, and immediate dentin sealing (IDS), demonstrating the practical implications of adhesive systems in enhancing restoration longevity and performance. In conclusion, despite significant advancements, no gold-standard method for optimal adhesion exists. Each adhesive system has distinct strengths and limitations. The review emphasizes the importance of evaluating methods for achieving durable adhesion and staying current with technological advancements in adhesive systems. Summary: This review provides a thorough analysis of dentin bonding systems, delving into the structures and bonding mechanisms of both enamel and dentin. By exploring various adhesive systems and their components, it highlights the ongoing challenges in achieving optimal resin–dentin adhesion. The review also addresses the clinical applications of dental adhesion, including direct restorations, indirect restorations, and immediate dentin sealing (IDS), illustrating how different adhesive techniques impact clinical outcomes. It underscores the necessity for continuous innovation and assessment of adhesive systems to enhance long-term bonding effectiveness in clinical practice.

Since color matching is considered a subjective procedure, accurate shade choice is often the most challenging stage of recreating the natural appearance of teeth. Furthermore, accurate determination of tooth color is imperative for the final outcome of dental restorations. The purpose of this research is to assess the accuracy of color match between diverse shade selection methods throughout a systematic review and meta-analysis. Two independent investigators (L.H. and R.B.) screened the literature in five electronic databases. Randomized controlled trials or in vitro papers studying the effect of using either digital shade selection or visual shade selection on the accuracy of color match were included. A total of 13 manuscripts comprised the meta-analysis. Color difference ($\mathsf{\Delta }$E) between restorations where the shade matching was performed by the conventional method was greater than those where the shade matching was performed by computerized methods (p = 0.007). According to the subgroup analysis, only the use of digital photographs for shade matching showed a reduction in the ($\mathsf{\Delta }$E) (p < 0.0001), while the use of a spectrophotometer has no advantages over the use of visual shade guide tabs (p = 0.57). On the other hand, global analysis showed that incorrect shade matching was higher when the conventional method using shade guide tabs was used (p < 0.001), irrespective of whether a spectrophotometer or a digital camera was used (p < 0.001). This study concluded that the use of digital photography and spectrophotometric measurements led to fewer color differences and less incorrect shade matching than conventional methods using color shade tabs.

This study aimed to identify the role of crosslinking agents in the resin–dentin bond strength (BS) when used as modifiers in adhesives or pretreatments to the dentin surface through a systematic review and meta-analysis. This paper was conducted according to the directions of the PRISMA 2020 statement. The research question of this review was: “Would the use of crosslinkers agents improve the BS of resin-based materials to dentin?” The literature search was conducted in the following databases: Embase, PubMed, Scielo, Scopus, and Web of Science. Manuscripts that reported the effect on the BS after the use of crosslinking agents were included. The meta-analyses were performed using Review Manager v5.4.1. The comparisons were performed by comparing the standardized mean difference between the BS values obtained using the crosslinker agent or the control group. The subgroup comparisons were performed based on the adhesive strategy used (total-etch or self-etch). The immediate and long-term data were analyzed separately. A total of 50 articles were included in the qualitative analysis, while 45 articles were considered for the quantitative analysis. The meta-analysis suggested that pretreatment with epigallocatechin-3-gallate (EGCG), carbodiimide, ethylenediaminetetraacetic acid (EDTA), glutaraldehyde, and riboflavin crosslinking agents improved the long-term BS of resin composites to dentin (p ≤ 0.02). On the other hand, the use of proanthocyanidins as a pretreatment improved both the immediate and long-term BS values (p ≤ 0.02). When incorporated within the adhesive formulation, only glutaraldehyde, riboflavin, and EGCG improved the long-term BS to dentin. It could be concluded that the application of different crosslinking agents such as carbodiimide, EDTA, glutaraldehyde, riboflavin, and EGCG improved the long-term BS of adhesive systems to dentin. This effect was observed when these crosslinkers were used as a separate step and when incorporated within the formulation of the adhesive system.

Immediate dentin sealing (IDS) involves applying an adhesive system to dentin directly after tooth preparation, before impression. This was considered an alternate to delayed dentin sealing (DDS), a technique in which hybridization is performed following the provisional phase and just before the indirect restoration luting procedure. This study aimed to compare the bond strength of restorations to dentin of the IDS and the DDS techniques throughout a systematic review and meta-analysis. The following PICOS framework was used: population, indirect restorations; intervention, IDS; control, DDS; outcomes, bond strength; and study design, in vitro studies. PubMed (MedLine), The Cochrane Library, ISI Web of Science, Scielo, Scopus, and Embase were screened up to January 2022 by two reviewers (L.H. and R.B.). In vitro papers studying the bond strength to human dentin of the IDS technique compared to the DDS technique were considered. Meta-analyses were carried out by using a software program (Review Manager v5.4.1; The Cochrane Collaboration). Comparisons were made by considering the adhesive used for bonding (two-step etch-and-rinse, three step etch-and-rinse, one-step self-etch, two-step self-etch, and universal adhesives). A total of 3717 papers were retrieved in all databases. After full-text assessment, 22 potentially eligible studies were examined for qualitative analysis, leaving a total of 21 articles for the meta-analysis. For the immediate bond strength, regardless of the adhesive strategy used, the IDS technique improved the bond strength of restorations to the dentin (p < 0.001). Taking into account the subgroup analysis, it seems that the use of the IDS technique with a two-step etch-and-rinse or a one-step self-etch adhesive system does not represent any advantage over the DDS technique (p = 0.07, p = 0.15). On the other hand, for the aged bond strength, regardless of the adhesive strategy used, the IDS technique improved the bond strength of restorations to the dentin (p = 0.001). The subgroups analysis shows that this improvement is observed only when a three-step etch-and-rinse adhesive system (p < 0.001) or when a combination of an adhesive system plus a layer of flowable resin (p = 0.01) is used. The in vitro evidence suggests that the use of the IDS technique improves the bond strength of dentin to resin-based restorations regardless of the adhesive strategy used. The use of a three-step etch-and-rinse adhesive system or the combination of an adhesive system plus a layer of flowable resin seems to considerably enhance the bond strength in the long term.

For many years, the use of probiotics in periodontitis treatment was reflected in their abilities to control the immune response of the host to the presence of pathogenic microorganisms and to upset periodontopathogens. Accordingly, the aim of the present study was to assess the use of probiotics as adjuvant therapy on clinical periodontal parameters throughout a systematic review and meta-analysis. The literature was screened, up to 4 June 2021, by two independent reviewers (L.H. and R.B.) in four electronic databases: PubMed (MedLine), ISI Web of Science, Scielo, and Scopus. Only clinical trials that report the effect of the use of probiotics as adjuvants in the treatment of periodontal disease were included. Comparisons were carried out using Review Manager Software version 5.3.5 (The Nordic Cochrane Centre, The Cochrane Collaboration, Copenhagen, Denmark). A total of 21 studies were considered for the meta-analysis. For the index plaque, the use of probiotics did not improve this clinical parameter (p = 0.16). On the other hand, for the periodontal pocket depth, the clinical attachment loss, the bleeding on probing, and the use of probiotics as adjuvant therapy resulted in an improvement of these parameters, since the control group achieved statistically higher values of this parameter (p < 0.001; p < 0.001; and p = 0.005, respectively). This study suggests that the use of probiotics led to an improvement in periodontal pocket depth, clinical attachment loss, and bleeding on probing parameters. On the other hand, this protocol seems to not be beneficial for the index plaque parameter.