Hybrid organic–inorganic metal halide perovskite semiconductors provide opportunities and challenges for the fabrication of low‐cost thin‐film photovoltaic devices. The opportunities are clear: the power conversion efficiency (PCE) of small‐area perovskite photovoltaics has surpassed many established thin‐film technologies. However, the large‐scale solution‐based deposition of perovskite layers introduces challenges. To form perovskite layers, precursor solutions are coated or printed and these must then be crystallized into the perovskite structure. The nucleation and crystal growth must be controlled during film formation and subsequent treatments in order to obtain high‐quality, pin‐hole‐free films over large areas. A great deal of understanding regarding material engineering during the perovskite film formation process has been gained through spin‐coating studies. Based on this, significant progress has been made on transferring material engineering strategies to processes capable of scale‐up, such as blade coating, spray coating, inkjet printing, screen printing, relief printing, and gravure printing. Here, an overview is provided of the strategies that led to devices deposited by these scalable techniques with PCEs as high as 21%. Finally, the opportunities to fully close the shrinking gap to record spin‐coated solar cells and to scale these efficiencies to large areas are highlighted.

Here we present a roadmap on Photonic metasurfaces. This document consists of a number of perspective articles on different applications, challenge areas or technologies underlying photonic metasurfaces. Each perspective will introduce the topic, present a state of the art as well as give an insight into the future direction of the subfield.

Monolithic all-perovskite tandem photovoltaics promise to combine low-cost and high-efficiency solar energy harvesting with the advantages of all-thin-film technologies. To date, laboratory-scale all-perovskite tandem solar cells have only been fabricated using non-scalable fabrication techniques. In response, this work reports on laser-scribed all-perovskite tandem modules processed exclusively with scalable fabrication methods (blade coating and vacuum deposition), demonstrating power conversion efficiencies up to 19.1% (aperture area, 12.25 cm²; geometric fill factor, 94.7%) and stable power output. Compared to the performance of our spin-coated reference tandem solar cells (efficiency, 23.5%; area, 0.1 cm²), our prototypes demonstrate substantial advances in the technological readiness of all-perovskite tandem photovoltaics. By means of electroluminescence imaging and laser-beam-induced current mapping, we demonstrate the homogeneous current collection in both subcells over the entire module area, which explains low losses (<5%_rel) in open-circuit voltage and fill factor for our scalable modules.

Sustained stimulated emission under continuous-wave (CW) excitation is a prerequisite for new semiconductor materials being developed for laser gain media. Although hybrid organic-inorganic lead-halide perovskites have attracted much attention as optical gain media, the demonstration of room-temperature CW lasing has still not been realized. Here, we present a critical step towards this goal by demonstrating CW amplified spontaneous emission (ASE) in a phase-stable perovskite at temperatures up to 120 K. The phase-stable perovskite maintains its room-temperature phase while undergoing cryogenic cooling and can potentially support CW lasing also at higher temperatures. We find the threshold level for CW ASE to be 387 W cm^-2 at 80 K. These results indicate that easily-fabricated single-phase perovskite thin films can sustain CW stimulated emission, potential at higher temperatures as well, by further optimization of the material quality in order to extend the carrier lifetimes.