Lyophilization stabilizes formulated biologics for storage, transport and application to patients. In process design and operation it is the link between downstream processing and with final formulation to fill and finish. Recent activities in Quality by Design (QbD) have resulted in approaches by regulatory authorities and the need to include Process Analytical Technology (PAT) tools. An approach is outlined to validate a predictive physical-chemical (rigorous) lyophilization process model to act quantitatively as a digital twin in order to allow accelerated process design by modeling and to further-on develop autonomous process optimization and control towards real time release testing. Antibody manufacturing is chosen as a typical example for actual biologics needs. Literature is reviewed and the presented procedure is exemplified to quantitatively and consistently validate the physical-chemical process model with aid of an experimental statistical DOE (design of experiments) in pilot scale.
Digital twins have emerged as a powerful concept for real-time monitoring and analysis, facilitating Quality by Design integration into biopharmaceutical manufacturing. Traditionally, lyophilization processes are developed through trial-and-error, incorporating high security margins and inflexible process set points. Digital twins enable the integration of adaptable operating conditions and implementation of automation through Advanced Process Control (APC) with Process Analytical Technology (PAT) and validated physicochemical models that rely on heat and mass transfer principles, allowing us to overcome the challenges imposed by the lyophilization process. In this study, a digital twin for freeze-drying processes is developed and experimentally validated. Using the digital twin, primary drying conditions were optimized for controlled nucleation and annealing methods by carrying out a few laboratory tests beforehand. By incorporating PAT and modeling, the digital twin accurately predicts the product’s temperature and drying endpoint, showing smaller errors than the experiments. The digital twin significantly increases productivity by up to 300% while reducing the costs by 74% and the Global Warming Potential by 64%.
Lyophilization is a widely used preservation method for thermosensitive products. It consists of three process steps: freezing, primary and secondary drying. One of the major drawbacks is the long processing time. The main optimization effort was put into the primary drying phase since it is usually the longest phase. However, the freezing step is of immense importance for process efficiency and product quality. The lack of control during freezing comprises a challenge for process design and tech transfer. In this study, four different freezing steps (shelf-ramped freezing with and without holding step, precooled shelves and an ice fog method for controlled nucleation) are used and their impact on primary drying experiments and simulations is shown. Only the ice fog method is able to control the nucleation temperature leading to low dry layer resistances with low deviations. During the primary drying simulations, the control of the nucleation temperature drastically increases the precision and accuracy of the product temperature prediction. For optimal primary drying design and model predictive control, the nucleation temperature is strongly recommended to be controlled inside a Process Analytical Technology (PAT) concept to achieve reliable and reproducible process conditions.
Lyophilization is widely used in the preservation of thermolabile products. The main shortcoming is the long processing time. Lyophilization processes are mostly based on a recipe that is not changed, but, with the Quality by Design (QbD) approach and use of Process Analytical Technology (PAT), the process duration can be optimized for maximum productivity while ensuring product safety. In this work, an advanced PAT approach is used for the endpoint determination of primary drying. Manometric temperature measurement (MTM) and comparative pressure measurement are used to determine the endpoint of the batch while a modeling approach is outlined that is able to calculate the endpoint of every vial in the batch. This approach can be used for process development, control and optimization.
Lyophilization process design still relies mainly on empirical studies with high experimental loads. In the regulatory demanded Quality by Design approach, process modeling is a key aspect. It allows process design, optimization and process control to ensure a safe process and product quality. A modeling approach is outlined that is able to predict the primary drying endpoint and temperature profile of distinct vials. Model parameters are determined by a reproducible determination concept. Simulated results are validated with a fractional factorial Design of Experiments (DoE) in pilot scale. The model shows higher accuracy and precision than the experiments and similar parameter interactions for both the endpoint and temperature determination. This approach can now be used to explore the primary design space in lyophilization process design. This paper proposes a distinct method for endpoint determination and product temperature prediction by a modeling approach based on Velardi et al. combined with a distinct model parameter determination according to Wegiel et al. and Tang et al.
Lyophilization is a widely used drying operation, but long processing times are a major drawback. Most lyophilization processes are conducted by a recipe that is not changed or optimized after implementation. With the regulatory demanded quality by design (QbD) approach, the process can be controlled inside an optimal range, ensuring safe process conditions. Process analytical technology (PAT) is crucial because it allows real-time monitoring and is part of a control strategy. In this work, emerging PAT (manometric temperature measurement (MTM), comparative pressure measurement, heat flux sensors, and ice ruler) are used for measurements during the freeze-drying process, and their potential for implementation inside a control strategy is outlined.