Two D–A copolymers, F1 and F2, with fluorene and thiazole units were substituted, respectively, on a thiadiazoloquinoxaline (TDQ) unit to enhance the electron-accepting strength of TDQ. The copolymers were synthesized by a cross-coupling Stille reaction and their optical and electrochemical properties were examined, which revealed that they have ultra-low band gaps and absorption in the near-infrared. These copolymers were employed as donors along with PC71BM as an electron acceptor for the fabrication of solution-processed bulk heterojunction (BHJ) polymer solar cells. After the optimization of the donor-to-acceptor weight ratio and the solvent additive (4 v% DIO as solvent additive), devices with F1:PC71BM and F2:PC71BM displayed power conversion efficiencies (PCEs) of 5.80% and 3.32%, respectively. Although F2 possesses a broader absorption profile compared with F1, the lower value of PCE for the F2-based device was attributed to the low LUMO offset between F2 and PC71BM, which limited the exciton dissociation. The abovementioned results indicate that these copolymers can be utilized for ternary BHJ and tandem solar cells to achieve a high PCE.
The deposition of uniform coatings of fluorinated polymers from solutions in supercritical carbon dioxide on a number of rough substrates allowed superhydrophobic (ultrahydrophobic) properties to be...
We synthesized two novel ultra low bandgap donor–acceptor (D–A) copolymers (Eg ≤ 1.2 eV), containing the thiadiazoloquinoxaline unit as the main electron accepting unit (A) and benzodithiophene (BDT) and dithienosilole (DTS) as different donor units (D), denoted as P1 and P2, respectively, using the cross-coupling Stille reaction. The copolymers possess light absorption ranging from UV (350 nm) to near-IR (1300 nm) with optical bandgaps of 1.16 eV and 1.08 eV, respectively. Quantum-chemical calculations and experimental data were compared for proposing a more detailed concept for the optical and electronic properties of these copolymers which can be used as donors for polymer solar cells (PSCs). The PSCs based on optimized P1:PC71BM and P2:PC71BM showed overall power conversion efficiencies (PCEs) of 4.32% and 3.48%, respectively. Although P2 possesses a broad absorption coverage of up to 1300 nm, the lower PCE may be attributed to the low Jsc, due to the poor driving force for exciton dissociation, since the LUMO offset with PC71BM is less than 0.3 eV. The PCE has been significantly increased to 7.27% and 6.68% for solvent vapor annealing (SVA) treated P1:PC71BM and P2:PC71BM active layers, respectively. This improvement arises from the appropriate nanoscale morphology and an increase in hole mobility, induced by the SVA treatment of the active layers.
The paper deals with a systematic categorization of nanofillers in terms of their effect arising upon introduction into polymer composites of tribological applications. The authors study the nature...