The study presents SEM-based automated mineralogy to distinguish between natural sediments and iron ore tailings deposits from the Paraopeba River, after the failure of B1 Dam in Brumadinho, Minas Gerais, Brazil. Samples were obtained from borehole cores drilled over channel bars and banks eight months after the failure. After preliminary facies description, sediments from 54 chosen intervals were subjected to density measurement, X-ray diffraction (XRD), SEM-based automated mineralogy (QEMSCAN) analysis and determination of geochemical major components. Hierarchical clustering analysis (HCA) and principal component analysis (PCA) revealed six main mineral associations governed by different contents and ratios of quartz, kaolinite and hematite. Natural sediments are predominantly composed of mineral associations containing kaolinite, quartz and quartz + hematite with density values ranging from 2.5 to 3.3 g/cm³. Tailings deposits have density values higher than 3.5 g/cm³ and are mainly composed of hematite with occasional occurrences of kaolinite + hematite. Because of geological complexity and historical terrain occupation and usage, geochemical anomalies are common in the Paraopeba River sediments. Our data suggests that mineralogical oriented studies should precede detailed geochemical investigations, to enhance the understanding of the source of such anomalies and the environmental jeopardy associated to the occurrence. In this sense, SEM-based mineralogy has an enormous potential in environment studies.

The geological context of this study is established in the iron oxide-copper-gold (IOCG) deposit of Sossego (Canaã dos Carajás, Brazil), where hydrothermal alterations in shear zones concentrated the metals of interest and added new characteristics to the metavolcanic-sedimentary and granite rocks. The mineral transformation of rocks by hypersaline fluids enriched in metals and silica also modifies some metallurgical properties, such as abrasiveness. Special bench tests on rock drill cores are used in mapping the abrasiveness of rocks, with the Bond abrasion test being more commonly used in the mining industry, but it has a restrictive sampling protocol and mass requirement for geometallurgical studies. As a counterpoint, the test of the Laboratoire Central des Ponts et Chaussées/Central Laboratory of Bridges and Roads (LCPC) requires a smaller amount of fine material and a finer granulometric range. The study on the use of LCPC was implemented in 40 samples, using Bond Ai as a reference. The results showed a strong correlation between both methodologies (R² = 95%), validating the use of LCPC to quantify abrasiveness in the Sossego mine. It was also possible to classify the most abrasive lithologies.

The weathering of Paleoproterozoic itabirites (metamorphic-banded iron formations) and dolomites from the Cauê and Gandarela Formations in the Quadrilátero Ferrífero (QF), Brazil, produces supergene iron ore with different mineralogical, chemical, and physical properties. In this work, we present a methodology to assess the changes in chemical and physical features of those rocks during weathering, via quantitative analyses of mineral assemblages. These mineral assemblages were calculated from chemical analyses of fresh and weathered samples collected from drill holes drilled in different iron ore deposits in the QF. In general, the number of mineral species found in fresh or/and weathered itabirite is restricted, which helps the quantification of the mass and volumes of minerals by normative calculation in a large dataset of drilling and channel samples. The calculation of the bulk density takes into consideration, besides the mineral phases, the voids and free water in the altered rock matrix. This study shows that the estimated porosity in supergene ore varies from 0% to 20%, for compact materials, and from 15% to 55% for friable rocks, indicating an important process of rock matrix dissolution during the weathering of itabirites. In this process, MgO, CaO, and FeO are leached out from carbonates, talc, and amphiboles. Magnetite is oxidized to hematite, releasing Fe²⁺, which is oxidized and precipitates as Fe-hydroxide. There is a concentration of Fe₂O₃, MnO, Al₂O₃, and SiO₂ in the supergene ore (saprolite) by residual enrichment or recrystallization of hematite, goethite, quartz, manganese oxides, and kaolinite. A calculation of weathering effects on the original protoliths allowed for the establishment of a correlation between different types of fresh itabirites and their corresponding weathered materials. The calculation was carried out in several steps, to account for changes in porosity and masses and has taken into consideration differences in the mineralogical composition of the protolith. Within the weathered zones, a strong link is observed between the existence of collapse on the topographic surface and the presence of supergene ore underneath. The partial to total dissolution of quartz and carbonates from the protolith itabirite results in very porous materials and leads to gravitational collapses.

Minute rosette-like crystals (~1 m) were found on the surface of a gold nugget from Gongo Soco, an iron ore deposit in Minas Gerais, Brazil. The rosettes consist essentially of palladium with some oxygen. The presence of oxygen and the occurrence of many of the rosettes on a coating of iron oxyhydroxide suggest that the rosettes crystallized from a Pd-O precursor that precipitated from aqueous solution, probably in the supergene environment, on the pre-existing gold nugget.