In this research, we propose a novel wheel-legged mobile robot to address the problems of insufficient obstacle-crossing performance and poor motion flexibility of mobile robots in non-structural environments. Firstly, we designed the transformable wheel mechanism and tail adaptive mechanism. Secondly, the kinematic model of the robot is established and solved by analyzing the whole motion and wheel-legged switching motion for the operation requirements under different road conditions. By synthesizing the constraint relationships among the modules and analyzing the robot’s obstacle-crossing abilities, we systematically established the mechanical model of the robot when it encounters obstacles. Thirdly, we studied the stability of the robot based on the stable cone method in the case of slope and unilateral transformation wheel deployment and achieved the tipping condition in the critical state. Finally, we used ADAMS software to simulate and analyze the driving process of the robot in various types of terrain and obstacles in order to verify that it has superior performance through obstacles and motion flexibility. The analysis shows that the robot can passively adapt to various complex and variable obstacle-filled terrains with obstacle heights which are much higher than its center of gravity range. The results of the study can provide a reference for the structural optimization and the obstacle-crossing performance improvement of mobile robots.

Nafion membrane with macropores is synthesized from silica crystal and composited with Pt nanoparticles to fabricate macroporous ionic polymer-metal composite (M-IPMC) actuator. M-IPMC shows highly dispersed small Pt nanoparticles on the porous walls of Nafion membrane. After the electromechanical performance test, M-IPMC actuator demonstrates a maximum displacement output of 19.8 mm and a maximum blocking force of 8.1 mN, far better than that of IPMC actuator without macroporous structure (9.6 mm and 2.8 mN) at low voltages (5.8–7.0 V). The good electromechanical performance can be attributed to interconnected macropores that can improve the charge transport during the actuation process and can allow the Pt nanoparticles to firmly adsorb, leading to a good electromechanical property.