Solvents can be used in the fabrication process of Polymer Optical Fiber (POF) sensors, as tapering or etching agents. We present a general approach - the use of Hansen Solubility Parameters (HSPs) - for identifying usable solvents for etching and present the first results on etching of TOPAS and Zeonex POFs. We also present alternatives to acetone in the form of trichloroethylene and THF, as an etching solvents for PMMA, as well as results on the etching rate dependence on fiber orientation and annealing.

We present an all-polymer optical fiber sensor for the sensing of dissolved oxygen by phase-fluorometry. The sensing matrix is applied as a film on the fiber end-surface, and consists of poly-methylmethacrylate (PMMA), the oxygen quenchable luminophore platinum-octaethylporphyrin (PtOEP) and the luminophore coumarin 545T for increasing the brightness of PtOEP by way of resonance energy transfer (RET), also called light harvesting. We show that by using Hansen Solubility Parameters (HSPs), it is possible to quantitatively formulate a solvent mixture with a good solubility of the polymer matrix and the luminophores simultaneously. Our approach can readily be extended to other polymers and luminophores and is therefore a valuable tool for researchers working with photoluminescence and polymeric matrices.

We present optimization results on the design of a polymer optical fiber single point sensor suitable for photoluminescence-based sensing. The single point sensing design consists of one or two annular cavities, separated by a small distance, milled into the fiber and subsequently filled with a thick solution of polymer, solvent, and photoluminescent molecules, which is then allowed to dry. The design is tested by varying the depth and length of a single cavity and utilizing two cavities with varying separations. Results from experiments show a maximum response at a separation of 2 mm for which we present an analytical explanation. A geometrical, numerical simulation model, taking into account both skew and meridional rays, is developed and shows very good agreement with the experimental results. The fiber design presents a general platform that has the potential for the fabrication of multi-point photoluminescent sensors, for which it is necessary to have several points along the fiber functionalized for sensing. Furthermore, the approach with polymer fibers and polymer sensing gels allows for a robust integration of the sensing matrix and the optical fiber, more so than is possible using glass optical fibers.