Daiyin Yin

Prof. Dr. Daiyin Yin

Department of Petroleum Engineering, Northeast Petroleum University

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 May 2019 in Energy Science & Engineering
Verified
Journal Article
Open access
PDF file
YZYazhou Zhou
Yazhou Zhou
DYDaiyin Yin
Daiyin Yin
WCWenlin Chen
Wenlin Chen
BLBin Liu
Bin Liu
XZXiaoran Zhang
Xiaoran Zhang
Emulsification plays an important role in enhancing oil recovery. Experiments and field applications of alkali/surfactant/polymer (ASP) flooding indicated that the amount of oil recovery in liquids with emulsions is 5% higher than that in liquids with no emulsions. Therefore, it is of great significance to study emulsion and its field application for enhanced oil recovery. This paper discusses the current status of emulsion for enhanced oil recovery, including the formation mechanism of emulsions in chemical flooding, rheological properties, stability, seepage characteristics, emulsion improving sweep volume, and displacement efficiency, along with future development plans of emulsion for enhanced oil recovery, especially surfactants for chemical flooding. In addition, the Pickering emulsion for application in enhanced oil recovery is also discussed. The development effects of emulsion flooding have been discussed for the Midway‐Sunset Oilfield, the emulsification characteristics of ASP flooding have been analyzed in Xing‐V and Xing‐II of the Daqing Oilfield, and the experiences regarding emulsion for enhanced oil recovery have been summarized. The key research directions of emulsion for enhanced oil recovery are indicated.

1 April 2018 in Journal of Petroleum Science and Engineering
Verified
Journal Article
Closed access
YZYazhou Zhou
Yazhou Zhou
DYDaiyin Yin
Daiyin Yin
RCRui Cao
Rui Cao
CZChengli Zhang
Chengli Zhang

24 November 2022 in Energy Science & Engineering
Verified
Journal Article
Open access
YZYazhou Zhou
Yazhou Zhou
DYDaiyin Yin
Daiyin Yin
YLYuanting Li
Yuanting Li
JHJingang He
Jingang He
CZChengli Zhang
Chengli Zhang
Chemical flooding has become an important method to enhance oil recovery in high‐water cut reservoirs. Crude oil emulsification often occurs during chemical flooding, and it plays a very positive role in increasing crude oil production. Crude oil emulsification increases the complexity of fluid flow in the reservoir including multifield coupling characteristics and multiphase flow and multiphase form characteristics. This paper discusses advanced research techniques and the status of multiphase fluid flows in chemical flooding, including the interfacial rheological properties of emulsions, physical simulation of emulsion seepage, and mathematical models and numerical simulations of seepage. Studies on the mechanism of seepage have analyzed the macroscopic and microscopic aspects of seepage during chemical flooding. Prospective directions for future research are indicated including the study of the interfacial rheological characteristics of emulsions, methods for the evaluation of the seepage characteristics of chemical flooding, and mathematical models of multiphase seepage during chemical flooding.

22 January 2018 in Journal of Dispersion Science and Technology
Verified
Journal Article
Closed access
YZYazhou Zhou
Yazhou Zhou
DYDaiyin Yin
Daiyin Yin
DWDongqi Wang
Dongqi Wang
XGXue Gao
Xue Gao
The emulsification process in reservoirs was simulated using core displacement experiments. Emulsions with different particle sizes were prepared using different permeability cores, and the different emulsion particle sizes formed using different permeability cores were studied. The emulsion particle size was graded against the core throat diameter, and the displacement efficiency of the different particle size emulsions was studied. The displacement mechanism of the emulsion was analyzed. The results indicated that the emulsion is mostly pore-throat scale formed in the porous media, with a particle size distribution similar to that of the core throat diameter, and the emulsion particle size increases with the increase of core permeability. The recovery percentage of emulsion flooding is greater when the matching ability of the emulsion was favorable, it is 17.07% when the matching factor is 1.08. The pore-throat scale emulsion can block high permeability zones and expand sweep volume. Moreover, due to deformation of the emulsion, the elastic stress can make the residual oil migrate forward and improve the efficiency of oil displacement. GRAPHICAL ABSTRACT

21 January 2019 in Journal of Chemistry
Verified
Journal Article
Open access
PDF file
DWDongqi Wang
Dongqi Wang
DYDaiyin Yin
Daiyin Yin
XGXiangzhu Gong
Xiangzhu Gong
Based on the features of microemulsion flooding in low-permeability reservoir, a three-dimension three-phase five-component mathematical model for microemulsion flooding is established in which the diffusion and adsorption characteristics of surfactant molecules are considered. The non-Darcy flow equation is used to describe the microemulsion flooding seepage law in which the changes of threshold pressure gradient can be taken into account, and the correlation coefficients in the non-Darcy flow equation are determined through the laboratory experiments. A new treatment for the changes of threshold pressure and the quantitative description of adsorption quantity of surfactant and relative permeability curves are presented, which enhance the coincidence between mathematical model and experiment results. The relative errors of main development indexes are within 4%. A software is programmed based on the model to execute a core-level small-scale numerical simulation in Chaoyanggou Oilfield. The fitting relative errors of the pressure, flow rate, and moisture content are 3.25%, 2.71%, and 2.54%, respectively. The results of laboratory experiments and numerical simulation showed that microemulsion system could reduce the threshold pressure gradient by 0.010 MPa/m and injection pressure by 0.6 MPa. The biggest decline in moisture content reaches 33%, and the oil recovery is enhanced by 10.8%.

20 April 2021 in Geofluids
Verified
Journal Article
Open access
PDF file
DYDaiyin Yin
Daiyin Yin
WZWei Zhou
Wei Zhou
When fractured low-permeability reservoirs enter a high water cut period, injected water always flows along fractures, water cut speeds increase rapidly, and oil production decreases quickly in oil wells. It is difficult to further improve the oil recovery of such fractured low-permeability reservoirs. In this paper, based on the advantages of in-depth profile control and cyclic water injection, the feasibility of combining deep profile control with cyclic water injection to improve oil recovery in fractured low-permeability reservoirs during the high water cut stage was studied, and the mechanisms of in-depth profile control and cyclic waterflooding were investigated. According to the characteristics of reservoirs in Zone X, as well as the fracture features and evolution mechanisms of the well network, an outcrop plate fractured core model that considers fracture direction was developed, and core displacement experiments were carried out by using the HPAM/Cr3+ gel in-depth profile control system. The enhanced oil recovery of waterflooding, cyclic water injection, and in-depth profile control, as well as a combination of in-depth profile control and cyclic water injection, was investigated. Moreover, variations in the water cut degree, reserve recovery percentage, injection pressure, fracture and matrix pressure, and water saturation were monitored. On this basis, the mechanism of enhanced oil recovery based on the combined utilization of in-depth profile control and cyclic waterflooding methods was analyzed. The results show that in-depth profile control and cyclic water injection can be synchronized to further increase oil recovery. The recovery ratio under the combination of in-depth profile control and cyclic water injection was 1.9 higher than that under the in-depth profile control and 5.6 higher than that under cyclic water injection. The combination of in-depth profile control and cyclic water injection can increase the reservoir pressure; therefore, the fluctuation of pressure between the matrix and its fractures increases, more crude oil flows into the fracture, and the oil production increases.