Qingji Wang

Qingji Wang


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 December 2022 in Sensors
Verified
Journal Article
Open access
PDF file
JZJi Zhang
Ji Zhang
XLXu Li
Xu Li
Qinhe PanQinhe Pan
Qinhe Pan
TLTong Liu
Tong Liu
QWQingji Wang
Qingji Wang
Hydrogen (H2) has gradually become a substitute for traditional energy, but its potential danger cannot be ignored. In this study, litchi-like g-C3N4/In2O3 composites were synthesized by a hydrothermal method and used to develop H2 sensors. The morphology characteristics and chemical composition of the samples were characterized to analyze the gas-sensing properties. Meanwhile, a series of sensors were tested to evaluate the gas-sensing performance. Among these sensors, the sensor based on the 3 wt% g-C3N4/In2O3 (the mass ratio of g-C3N4 to In2O3 is 3:100) showeds good response properties to H2, exhibiting fast response/recovery time and excellent selectivity to H2. The improvement in the gas-sensing performance may be related to the special morphology, the oxygen state and the g-C3N4/In2O3 heterojunction. To sum up, a sensor based on 3 wt% g-C3N4/In2O3 exhibits preeminent performance for H2 with high sensitivity, fast response, and excellent selectivity.

28 February 2025 in Sensors and Actuators B: Chemical
Verified
Journal Article
Closed access
YLYinxiang Li
Yinxiang Li
CPChongchen Pang
Chongchen Pang
LXLinghong Xue
Linghong Xue
XLXu Li
Xu Li
QWQingji Wang
Qingji Wang

9 November 2024 in Materials Science in Semiconductor Processing
Verified
Journal Article
Closed access
YLYanhu Li
Yanhu Li
MCMei Chen
Mei Chen
LXLinghong Xue
Linghong Xue
XLXu Li
Xu Li
QWQingji Wang
Qingji Wang

19 April 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
MBMingjia Bai
Mingjia Bai
CLChaoyang Li
Chaoyang Li
XZXiaojun Zhao
Xiaojun Zhao
QWQingji Wang
Qingji Wang
Qinhe PanQinhe Pan
Qinhe Pan
ZnO is a wide band gap semiconductor metal oxide that not only has excellent electrical properties but also shows excellent gas-sensitive properties and is a promising material for the development of NO2 sensors. However, the current ZnO-based gas sensors usually operate at high temperatures, which greatly increases the energy consumption of the sensors and is not conducive to practical applications. Therefore, there is a need to improve the gas sensitivity and practicality of ZnO-based gas sensors. In this study, three-dimensional sheet-flower ZnO was successfully synthesized at 60 °C by a simple water bath method and modulated by different malic acid concentrations. The phase formation, surface morphology, and elemental composition of the prepared samples were studied by various characterization techniques. The gas sensor based on sheet-flower ZnO has a high response value to NO2 without any modification. The optimal operating temperature is 125 °C, and the response value to 1 ppm NO2 is 125. At the same time, the sensor also has a lower detection limit (100 ppb), good selectivity, and good stability, showing excellent sensing performance. In the future, water bath-based methods are expected to prepare other metal oxide materials with unique structures.

16 August 2022 in Rare Metals
Verified
Journal Article
Closed access
PDF file
XMXin‐Jia Miao
Xin‐Jia Miao
XZXiaojun Zhao
Xiaojun Zhao
HQHao Qin
Hao Qin
QJQi Jin
Qi Jin
YCYang Chen
Yang Chen
Qinhe PanQinhe Pan
Qinhe Pan

12 May 2023 in Chemosensors
Verified
Journal Article
Open access
PDF file
JZJi Zhang
Ji Zhang
FZFangfang Zhang
Fangfang Zhang
XLXu Li
Xu Li
QWQingji Wang
Qingji Wang
With increasingly serious environmental problems caused by the improvement in people’s living standards, the number of cars has increased sharply in recent years, which directly leads to the continuous increase in the concentration of NO2 in the air. NO2 is a common toxic and irritant gas, which is harmful to both the human body and the environment. Therefore, this research focuses on NO2 detection and is committed to developing high-performance, low detection limit NO2 sensors. In this study, flower-like Au-loaded In2O3 was successfully fabricated using the hydrothermal method and the wet impregnation method. The morphological features and chemical compositions of the as-prepared samples were characterized using SEM, TEM, XRD and XPS. A variety of sensors were fabricated and the gas-sensing properties of sensors were investigated. The results indicate that the sensor based on 0.5 mol% Au/In2O3 shows a response value of 1624 to 1 ppm NO2 at 100 °C, which is 14 times that based on pure In2O3. Meanwhile, the detection limit of the sensor based on 0.5 mol% Au/In2O3 for NO2 is 10 ppb, and the response value is 10.4. In addition, the sensor based on 0.5 mol% Au/In2O3 also has high selectivity to NO2 among CO, CO2, H2, CH4, NH3, SO2 and H2S. Finally, the sensitization mechanism of Au/In2O3 was discussed, and the reasons for improving the performance of the sensor were analyzed. The above results and analysis demonstrate that the gas-sensing attributes of the sensor based on 0.5 mol% Au/In2O3 to NO2 improved remarkably; at the same time, it has been proved that the composite material has extensive potential in practical applications.