Department of Mechanical and Aerospace Engineering, Statler College of Engineering and Mineral Resources, West Virginia University, Morgantown, WV, USA
Dr. Piyush M. Mehta
Department of Mechanical and Aerospace Engineering, Statler College of Engineering and Mineral Resources, West Virginia University, Morgantown, WV, USA
Drag coefficient is a major source of uncertainty in calculating the aerodynamic forces on satellites in low Earth orbit. Closed-form solutions are available for simple geometries under the assumption of free molecular flow; however, most satellites have complex geometries, and a more sophisticated method of calculating the drag coefficient is needed. This work builds toward modeling physical drag coefficients using the direct simulation Monte Carlo method capable of accurately modeling flow shadowing and concave geometries. The direct simulation three-dimensional visual program and the direct simulation Monte Carlo analysis code are used to compare the effects of two separate gas–surface interaction models: diffuse reflection with incomplete accommodation and quasi-specular Cercignani–Lampis–Lord models. Results show that the two gas–surface interaction models compare well at altitudes below ∼500 km during solar maximum conditions and below ∼400 km during solar minimum conditions. The difference in dra...
Drag coefficient calculations using the Cercignani–Lampis–Lord quasi-specular gas–surface interaction model have been used to derive modified closed-form solutions for several simple geometries. The key component of the modified closed-form solutions is a relation between the normal energy and normal momentum accommodation coefficients, which is valid within ∼0.5% over the global parameter space. The modified closed-form solutions are made self-consistent by relating the effective energy accommodation to the partial pressure of atomic oxygen through a Langmuir isotherm. The modified closed-form solutions are compared to fitted drag coefficients and drag coefficients computed using two other gas–surface interaction models: diffuse reflection with incomplete accommodation and Maxwell’s model. Comparison during solar maximum conditions shows that both the diffuse reflection with incomplete accommodation and Cercignani–Lampis–Lord models agree with fitted drag coefficients within ∼2% below ∼500 km altitude. ...
A thermospheric neutral mass density model with robust and reliable uncertainty estimates is developed based on the Space Environment Technologies (SET) High Accuracy Satellite Drag Model (HASDM) density database. This database, created by SET, contains 20 years of outputs from the U.S. Space Force's HASDM, which currently represents the state of the art for density and drag modeling. We utilize principal component analysis for dimensionality reduction, which creates the coefficients upon which nonlinear machine‐learned (ML) regression models are trained. These models use three unique loss functions: Mean square error (MSE), negative logarithm of predictive density (NLPD), and continuous ranked probability score. Three input sets are also tested, showing improved performance when introducing time histories for geomagnetic indices. These models leverage Monte Carlo dropout to provide uncertainty estimates, and the use of the NLPD loss function results in well‐calibrated uncertainty estimates while only increasing error by 0.25% (<10% mean absolute error) relative to MSE. By comparing the best HASDM‐ML model to the HASDM database along satellite orbits, we found that the model provides robust and reliable density uncertainties over diverse space weather conditions. A storm‐time comparison shows that HASDM‐ML also supplies meaningful uncertainty estimates during extreme geomagnetic events.