In this study, a nitrogen–phosphorus intumescent flame-retardant 3-(N-diphenyl phosphate) amino propyl triethoxy silane (DPES), the ionic liquid (IL) of 1-butyl-3-methyl-imidazole phosphate, and a phosphorous-containing ionic liquid-modified expandable graphite (IL-EG), were synthesized, and their molecular structures were characterized. The flame-retardant rigid polyurethane foams (RPUFs) were compounded with synergistic flame-retardant IL-EG/DPES to study the effects of the combination IL-EG and DPES on the pore structure, mechanical properties, thermal decomposition behavior and thermal decomposition mechanism of RPUF. The results showed that IL-EG/DPES had good thermal stability, and an excellent expansibility and char yield. The flame-retardant RPUF, modified with IL-EG and DPES at the ratio of 1:1, had a relatively uniform pore size, the highest compressive strength, and an excellent flame-retardant performance due to the form interwoven hydrogen bonds between IL-EG and DPES, as well as the new synergistic flame-retardant coating on the RPUF surface to restrict the transfer of gas or heat into the PU matrix.

With the continuous advancement of contemporary medical technology, an increasing number of individuals are inclined towards self-monitoring their physiological health information, specifically focusing on monitoring blood glucose levels. However, as an emerging flexible sensing technique, continuous and non-invasive monitoring of glucose in sweat offers a promising alternative to conventional invasive blood tests for measuring blood glucose levels, reducing the risk of infection associated with blood testing. In this study, we fabricated a flexible and wearable electrochemical enzyme sensor based on a two-dimensional Ti₃C₂T_x MXene nanosheets and coral-like polyaniline (PANI) binary nanocomposite (denoted as Ti₃C₂T_x/PANI) for continuous, non-invasive, real-time monitoring of sweat glucose. The exceptional conductivity of Ti₃C₂T_x MXene nanosheets, in conjunction with the mutual doping effect facilitated by coral-like PANI, significantly enhances electrical conductivity and specific surface areas of Ti₃C₂T_x/PANI. Consequently, the fabricated sensor exhibits remarkable sensitivity (25.16 μA·mM⁻¹·cm⁻²), a low detection limit of glucose (26 μM), and an extensive detection range (0.05 mM ~ 1.0 mM) in sweat. Due to the dense coral-like structure of Ti₃C₂T_x/PANI binary nanocomposite, a larger effective area is obtained to offer more active sites for enzyme immobilization and enhancing enzymatic catalytic activity. Moreover, the sensor demonstrates exceptional mechanical performance, enabling a 60° bend in practical applications, thus satisfying the rigorous demands of human sweat detection applications. The results obtained from continuous 60 min in vitro monitoring of sweat glucose levels demonstrate a robust correlation with the data of blood glucose levels collected by a commercial glucose meter. Furthermore, the fabricated Ti₃C₂T_x/PANI/GOx sensor demonstrated agreement with HPLC findings regarding the actual concentration of added glucose. This study presents an efficient and practical approach for the development of a highly reliable MXene glucose biosensor, enabling stable and long-term monitoring of glucose levels in human sweat.

Thermally reversible self-healing polymer (SHP) electrolyte membranes are obtained by Diels-Alder cycloaddition and electrolyte embedding. The SHP electrolytes membranes are found to display high ionic conductivity, suitable flexibility, remarkable mechanical properties and self-healing ability. The decomposition potential of the SHP electrolyte membrane is about 4.8 V (vs. Li/Li⁺) and it possesses excellent electrochemical stability, better than that of the commercial PE film which is only stable up to 4.5 V (vs. Li/Li⁺). TGA results show that the SHP electrolyte membrane is thermally stable up to 280 °C in a nitrogen atmosphere. When the SHP electrolyte membrane is used as a separator in a lithium-ion battery with an LCO-based cathode, the SHP membrane achieved excellent rate capability and stable cycling for over 100 cycles, and the specific discharge capacity could be almost fully recovered after self-healing. Furthermore, the electrolyte membrane exhibits excellent electrochemical performance, suggesting its potential for application in lithium-ion batteries as separator material.

Antioxidants are normally utilized to extend the service life of polymers due to the strong reducibility of the phenolic hydroxyl group of the hindered phenol structure. Inspired by this characteristic, we have introduced green tea polyphenol (TP) supported on a silica surface containing considerable phenolic hydroxyl groups to obtain a novel biomass anti-aging filler (BAF, denoted as silica-s-TP) to reinforce and improve the anti-aging property of rubber composites. The applying of silica-s-TP to enhance the thermal-oxidative stability and ultraviolet light (UV) aging resistance of styrene-butadiene rubber (SBR) was evaluated. The hybrid biomass anti-aging filler could not only uniformly disperse in the rubber matrix, giving rise to the excellent mechanical properties, but also enhance the properties of thermal-oxidative stability and UV aging resistance with the increasing silica-s-TP content of SBR distinctly. This study provides a mild and environmentally friendly strategy to prepare the functional biomass filler, which could be applied as not only a reinforcement filler but also an anti-aging additive in “green rubber”.

Very recently, there is a great research interest in electrochemiluminescence (ECL) featuring thermally activated delayed fluorescence (TADF) properties, i.e., TADF-ECL. It is appealing since the earlier reports in this topic well-confirmed that this strategy has a great potential in achieving all-exciton-harvesting ECL efficiency under electrochemical excitation, which is a breakthrough in the topic of organic ECL. However, organic phase electrochemistry and ECL studies surrounding TADF-ECL are still extremely rare. Especially, the ECL spectra of previous reported TADF emitters are still very different from their PL spectra. In this work, we systematically measure and discuss the liquid electrochemistry and ECL behavior of two typical TADF molecules in organic medium. Most importantly, we verify for the first time that the ECL spectra of them (coreactant ECL mode) are identical to their PL spectra counterparts, which confirms the effectiveness of TADF photophysical properties in the coreactant ECL mode in practice.