A constellation of small, low-cost satellites is able to make scientifically valuable measurements of the Earth which can be used for weather forecasting, disaster monitoring, and climate studies. Eight CYGNSS satellites were launched into low Earth orbit on December 15, 2016. Each satellite carries a science radar receiver which measures GPS signals reflected from the Earth surface. The signals contain information about the surface, including wind speed over ocean, and soil moisture and flooding over land. The satellites are distributed around their orbit plane so that measurements can be made more often to capture extreme weather events. Innovative engineering approaches are used to reduce per satellite cost, increase the number in the constellation, and improve temporal sampling. These include the use of differential drag rather than propulsion to adjust the spacing between satellites and the use of existing GPS signals as the science radars’ transmitter. Initial on-orbit results demonstrate the scientific utility of the CYGNSS observations, and suggest that a new paradigm in spaceborne Earth environmental monitoring is possible.
22 May 2018 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Geophysical model functions (GMFs) are developed which map the Level 1 observables made by the Cyclone Global Navigation Satellite System (CYGNSS) radar receivers to ocean surface wind speed. The observables are: 1) the normalized bistatic radar cross section (σ$_{o}$) of the ocean surface; and 2) the slope of the leading edge of the radar return pulse scattered by the ocean surface. GMFs are empirically derived from measurements by CYGNSS which are nearly coincident with independent estimates of the 10-m-referenced ocean surface wind speed (u$_{10}$). Two different sources of “ground truth” wind speed are considered: numerical weather prediction model outputs and measurements by the NOAA P-3 hurricane hunter during eyewall penetrations of major hurricanes. The GMFs derived in each case have significant differences that are believed to result from differences in the state of development of the long wave portion of the ocean surface height spectrum that result from characteristic differences in wave age and fetch length near versus far from a hurricane.
A new wind speed product has been developed using bistatic radar data from NASA's Cyclone Global Navigation Satellite System (CYGNSS) mission. The product addresses short-comings in two existing CYGNSS gridded wind speed products, the L3 Gridded Fully Developed Seas (FDS) Wind Speeds and the L3 Storm-Centric Gridded products, which individually are optimized for global, non-storm conditions and localized, high wind speed tropical cyclone conditions, respectively. In order to create a unified gridded wind speed product that captures both the storm force winds and the far-field environmental wind speeds, wind fields from the two products are merged onto a common grid. The algorithm produces global (+/- 40o latitude) windspeeds, averaged over a +/-6 hour window, and reported on a 0.1x0.1o grid. Gridded wind speeds are reported every 6 hours for each tropical cyclone when there are overpasses available during that time interval. The files are output on a storm-by-storm basis. Quadrant-dependent tropical cyclone 34-knot wind radii are estimated from the merged wind fields and included in the dataset. The performance of the merged wind speed product is validated against HWRF model output and SMAP tropical cyclone wind products, and the temporal and spatial sampling of the dataset is characterized. The dataset is found to exceed current temporal coverage capabilities compared to other existing tropical cyclone wind speed remote sensing instruments, although limitations on high wind speed retrievals and variable spatial coverage are notable and can be attributed to weaknesses of the underlying GNSS-R modality.
Global Navigation Satellite System – Reflectometry (GNSS-R) is a relatively new field in remote sensing that uses reflected GPS signals from the Earth’s surface to study the state of the surface geophysical parameters under observation. The CYGNSS is a first of its kind GNSS-R constellation mission launched in December 2016. It aims at providing high quality global scale GNSS-R measurements that can reliably be used for ocean science applications such as the study of ocean wind speed dynamics, tropical cyclone genesis, coupled ocean wave modelling, and assimilation into Numerical Weather Prediction models. To achieve this goal, strong quality control filters are needed to detect and remove outlier measurements. Currently, quality control of CYGNSS data products are based on fixed thresholds on various engineering, instrument, and measurement conditions. In this work we develop a Neural Network based quality control filter for automated outlier detection of CYGNSS retrieved winds. The primary merit of the proposed ML filter is its ability to better account for interactions between the individual engineering, instrument and measurement conditions than can separate thresholded flags for each one. Use of Machine Learning capabilities to capture inherent patterns in the data can create an efficient and effective mechanism to detect and remove outlier measurements. The resulting filter has a probability of outlier detection (PD) >75% and False Alarm Rate (FAR) < 20% for a wind speed range of 5 to 18 m/s. At least 75% of the outliers with wind speed errors of at least 5 m/s are removed while ~100% of the outliers with wind speed errors of at least 10 m/s are removed. This filter significantly improves data quality. The standard deviation of wind speed retrieval error is reduced from 2.6 m/s without the filter to 1.7 m/s with it over a wind speed range of 0 to 25 m/s. The design space for this filter is also analyzed in this work to characterize trade-offs between PD and FAR. Currently the filter performance is applicable only up to moderate wind speeds, as sufficient data is available only in this range to train the filter, as a way forward, more data over time can help expand the usability of this filter to higher wind speed ranges as well.
Since its launch in 2016, a number of wind speed retrieval algorithms have been developed for the NASA CYGNSS satellite observations. We assess their accuracy and precision and characterize the dependence of their performance on environmental factors. The dependence of retrieval uncertainty on the wind speed itself is considered. The triple colocation method of validation is used to correct for the quality of the reference wind speed products with which CYGNSS is compared. The dependence of retrieval performance on sea state is also considered, with particular attention being paid to the long wave portion of the surface roughness spectrum that is less closely coupled to the instantaneous local wind speed than the capillary wave portion of the spectrum. The dependence is found to be significant, and the efficacy of the approaches taken to account for it is examined. The dependence of retrieval accuracy on wind speed persistence (the change in wind speed prior to a measurement) is also characterized and is found to be significant when winds have increased markedly in the ~2 h preceding an observation.