The concerned stakeholders have been pursuing renewable energy seriously due to its overwhelming benefits. Countries that receive less solar radiation are not lagging behind as they are working to optimize the available radiation let alone of countries that receive sufficient solar radiation over long durations such as Fiji. In view of the abundancy of this energy in Fiji, the country has been working intensely on tapping the full potential of this energy, thus proposed that by 2030; more than 50% of its energy will come from renewable energy. The accurate estimation of global solar radiation determines the reliability of performance evaluation of solar energy systems. Therefore, the key interest of this study is in respect of accurate mapping of solar radiation to aid reliable solar energy design especially in siting and sizing of photovoltaic power systems. In the light of this, this work modelled solar radiation on the earth of Fiji from common meteorological and geographical data in all locations in Fiji using Artificial Neural Networks (ANN). There are different configurations of ANN but in this study, Levenberg-Marquardt (LM) and Scaled Conjugate Gradient (SCG) were selected as the learning algorithms due to the data size, speed of computation and the success of these algorithms in solar radiation modelling. Similarly, a tangent sigmoid transfer function was used in the network. In total, twelve different configurations of ANN were considered and the best configuration was selected to predict the solar radiation potential in Fiji. Since ANN requires input data to train the network, meteorological data covering 36 years (1984–2019) and geographical data from NASA database were supplied to the network. All the locations considered were distributed evenly throughout Fiji and thus covered all the four regions and 14 provinces in Fiji. The geographical and meteorological data used to train the network are month, latitude, longitude, altitude, mean temperature, relative humidity, precipitation and solar radiation. The mean squared error of 0.118838 and correlation coefficient of 0.9402 were obtained between the ANN predicted and measured solar radiation for the entire dataset. These correlation coefficients and mean squared error showed that ANN model of solar radiation in Fiji is satisfactory and thus can be used as an alternative where solar radiation data are not available. Similarly, the network produced satisfactory solar radiation result for the locations where there are no solar radiation data. To ease solar radiation assessment of all places in Fiji, the iso-lines of the solar radiation were presented in the form of monthly maps. It is believed that this prediction will aid energy stakeholders in making best decision concerning solar energy potential in Fiji thus boosting optimal utilization of the scarce resource.
This study investigates the potential impacts of future warming on Global Solar Radiation (GSR) in different parts of Togo, West Africa. It used regional climate simulations of the International Centre for Theoretical Physics version 4.7 (RegCM4) driven by HadGEM-ES and NorESM-M GCM for three different time-slice periods: baseline (1976–2005), near future (2031–2060) and far future (2070–2099). The models produced realistic simulations of GSR and temperature characteristics over the stations and the simulations spread are within the observation uncertainty. The simulations compared fairly well with the NASA observations. Biases in both the GSR (10–37 Wm−2 or 5–17%) and temperature (0.1–2.0 °C or 0.5–7.3%) were found to be insignificant at p < 0.05 across all the stations under investigation. The results revealed increasing but insignificant trends (0.025–0.043 °C year−1) in observed temperature but decreasing (0.225–0.567 Wm−2 year−1) in GSR during the baseline period. The estimated increasing trends (0.004–0.035% year−1) in cloud cover were partly attributed to the observed variations in surface GSR. All models projected increase in temperature (0.2–4.6 °C) but decrease in GSR (0.5–5.8%) over the entire country at both annual and seasonal time-scales. The simulated future changes in temperatures and GSR were expected to increase further and decrease, respectively, by the end of the century. The study has noteworthy implication in solar photovoltaic power production under warmer climate. It suggests a need for improved technology with the least climate change impacts over the republic of Togo, West Africa.
13 February 2022 in Meteorology and Atmospheric Physics
Battery thermal management systems (BTMSs) are used in electric vehicles (EVs) to regulate the heat generated by batteries while in use. Existing research on the improvement of BTMSs revealed that more research can be done by exploring different strategies to extend the service life and capabilities of EV batteries beyond the current limitations. In this study, effects of orientation of baffles; straight ( ), inclined ( and ), height of baffles, thickness of baffles, positioning of baffles and number of baffles on the performance of conventional Z - Type BTMS were studied using Computational Fluid Dynamics (CFD) approach. The CFD approach was validated with existing experimental result from literature. Findings from the study showed that for straight baffle, the maximum temperature ( ) reduces as the height of baffles decreases. Furthermore, increasing the baffle thickness from 1 mm to 2 mm, produced reduction in by 0.26 K. For inclined baffles, by comparing the BTMS without baffles and BTMS with 2 baffles, and maximum temperature difference ( ) reduced by 0.82 K and 0.68 K, respectively at angle , and reduced by 1.65 K and 1.43 K, respectively at angle . The BTMS with 2 baffles, inclined at angle , with height of 6 mm and thickness of 1 mm, yielded the optimum (Lowest) value of 333.15 K, a reduction by 2.65 K when compared to the conventional Z - Type BTMS. This was also accompanied with a slight increase in by 1.12 Pa. In conclusion, it can be said that findings from this study will be beneficial in enhancing the design of BTMSs through adequate selection and utilization of baffles orientation.
Energy efficiency strategies in industrial breweries examine the inefficiency of thermal systems from a thermodynamic perspective. However, understanding the costs of inefficiencies in systems, including non-thermodynamic costs, requires exergoeconomics. This study examined wort production in a standard Tier-1 brewery from the tripod of energy, exergy, and exergoeconomics analyses to assess the performance of brewing sections and to pinpoint components that contributed the most to exergy destruction and product cost rate. The energy analyses for the production system showed that the total specific energy for processing 10.05 tons of brew grains to 346.98 hL high-gravity wort was (86 ± 1) MJ/hL at an operational energy efficiency of 30.35%. The exergetic analyses showed that the cumulative exergetic destruction was 3.2737 MW, with the brewhouse section contributing 89.25% of the system’s inefficiencies. Also, the analyses showed that the wort kettle (42.7911%), mash tun (10.8086%), preheater (10.0683%), whirlpool (8.3522%), and adjunct kettle (6.2705%) are the top five components with the highest rates of cumulative exergy destruction. The exergoeconomic analyses revealed that the cost rate of processing chilled wort was estimated to be 0.0681 USD/s per overall exergetic efficiency of 6.61%. The five most significant components are the wort kettle (53.70%), whirlpool (16.42%), mash filter (10.44%), mash tun (6.875%), and adjunct kettle (3.31%) based on the relative total cost increases for the production processes. Additionally, wet steam throttling resulted in a 2.51% increase in exergetic efficiency, a 1.60% drop in exergetic destruction rate, and a decrease in cost rates to 0.0675 USD/s.
This study investigates the effects of varying hydrogen percentages in fuel blends on combustion dynamics, engine performance, and emissions. Experimental data and analytical equations were used to evaluate combustion parameters such as equivalent lambda, in-cylinder pressure, heat release rate, and ignition timing. The findings demonstrate that hydrogen blending enhances combustion stability, shortens ignition delay, and shifts peak heat release to be closer to the top dead center (TDC). These changes improve thermal efficiency and reduce cycle-to-cycle variation. Hydrogen blending also significantly lowers carbon dioxide (CO2) and hydrocarbon (HC) emissions, particularly at higher blend levels (H0–H5), while lower blends increase nitrogen oxides (NOx) emissions and risk pre-ignition due to advanced start of combustion (SOC). Engine performance improved with an average hydrogen energy contribution of 12% under a constant load. However, the optimal hydrogen blending range is crucial to balancing efficiency gains and emission reductions. These results underline the potential of hydrogen as a cleaner additive fuel and the importance of optimizing blend ratios to harness its benefits effectively.