A benchmark of Reynolds-Averaged Navier-Stokes (RANS)-informed analytical methods, which are attractive for predicting fan broadband noise, was conducted within the framework of the European project TurboNoiseBB. This paper discusses the first part of the benchmark, which investigates the influence of the RANS inputs. Its companion paper focuses on the influence of the applied acoustic models on predicted fan broadband noise levels. While similar benchmarking activities were conducted in the past, this benchmark is unique due to its large and diverse data set involving members from more than ten institutions. In this work, the authors analyze RANS solutions performed at approach conditions for the ACAT1 fan. The RANS solutions were obtained using different CFD codes, mesh resolutions, and computational settings. The flow, turbulence, and resulting fan broadband noise predictions are analyzed to pinpoint critical influencing parameters related to the RANS inputs. Experimental data are used for comparison. It is shown that when turbomachinery experts perform RANS simulations using the same geometry and the same operating conditions, the most crucial choices in terms of predicted fan broadband noise are the type of turbulence model and applied turbulence model extensions. Chosen mesh resolutions, CFD solvers, and other computational settings are less critical.

A benchmark dedicated to RANS-informed analytical methods for the prediction of turbofan rotor–stator interaction broadband noise was organised within the framework of the European project TurboNoiseBB. The second part of this benchmark focuses on the impact of the acoustic models. Twelve different approaches implemented in seven different acoustic solvers are compared. Some of the methods resort to the acoustic analogy, while some use a direct approach bypassing the calculation of a source term. Due to differing application objectives, the studied methods vary in terms of complexity to represent the turbulence, to calculate the acoustic response of the stator and to model the boundary and flow conditions for the generation and propagation of the acoustic waves. This diversity of approaches constitutes the unique quality of this work. The overall agreement of the predicted sound power spectra is satisfactory. While the comparison between the models show significant deviations at low frequency, the power levels vary within an interval of ±3 dB at mid and high frequencies. The trends predicted by increasing the rotor speed are similar for almost all models. However, most predicted levels are some decibels lower than the experimental results. This comparison is not completely fair—particularly at low frequency—because of the presence of noise sources in the experimental results, which were not considered in the simulations.

The turbulent wake generated by a rotor interacting with outlet guide vanes (OGVs) is one of the dominant broadband noise sources in a turbofan engine. An accurate representation of the rotor wake turbulence is therefore important for the reliable prediction of the rotor–OGV interaction noise. This paper presents a turbulence synthesis method based on a spectral proper orthogonal decomposition (POD) representation of the turbulent wake that aims to reproduce the desired velocity cross-spectrum along the OGV leading edges where noise is emitted due to turbulence–OGV interaction. The method is first developed in the frequency domain based on a superposition of vortical modes with the appropriate amplitudes. Fourier modes and POD modes are proposed to represent the two-point velocity spectrum. The POD modes will be shown to be highly efficient in reconstructing the flowfield near the tip region where a large-scale coherent structure is present. An extension of the POD synthetic turbulence method to the time domain is also presented by means of a white noise filtering technique to allow the generation of time-varying velocity signals with the desired cross-spectral characteristics. The results show that both the one- and two-point statistics can be closely reproduced. The proposed frequency-domain POD synthetic turbulence method for fan broadband noise prediction for a realistic fan–OGV configuration is illustrated by the use of a frequency-domain linearized Navier–Stokes solver to predict the sound power radiation due to each vortical mode. Overall sound power levels at a number of discrete frequencies are predicted and compared against measured noise data. Agreement is found to be within the uncertainty of the noise sound power measurement.

The application of acoustic liners near/directly over a sound source has gained significant interest for the excess noise reduction achieved with Over-the-Rotor (OTR) liners compared to the conventional liner installations at the intake of an aero-engine. However, the mechanism of noise reduction achieved in the OTR liners is not clearly understood. This paper aims to explain this mechanism by considering a static monopole source placed over a finite liner insert with a zero background mean flow. This has been investigated numerically using COMSOL Multiphysics in a half-space domain and compared with reference analytical solutions for infinite lined walls. One of the key findings of the paper is the underlying physics of the source modification mechanism, which has been found to be the interference between the primary noise source and a secondary noise source forming on the liner surface. It is identified through an optimal impedance study that this back-reaction mechanism is dominant when the source is located for a normalised tip gap, e/λ<0.25, where e is the distance between the source and the liner surface and λ is the acoustic wavelength. Within this region, there exists an optimum normalised liner length, L / e providing a maximum insertion loss.

This paper presents an experimental and analytical investigation into the dominant noise generation mechanisms of unmanned Fixed-wing Vertical Take-Off and Landing (VTOL) propeller–wing configurations during takeoff. This paper reports the velocity measurements made in the close vicinity of a scale-model propeller adjacent to a flat plate or wing, aimed at understanding and characterising its dominant noise generation mechanisms. This paper identifies two main interaction mechanisms. The first is a purely acoustical phenomenon whereby the wing acts as an image source causing strong interference between the direct and image noise sources due to the propeller. The second is a significant noise increase resulting from the unsteady blade loading that occurs when the blade passes over the wing at lower vertical separation distances. Other, more minor noise sources from the propeller and the wing are also discussed in this paper.