To mitigate global warming, humankind has been forced to develop new efficient energy solutions based on renewable energy sources. Hydrothermal liquefaction (HTL) is a promising technology that can efficiently produce bio-oil from several biomass sources. The HTL process uses sub- or supercritical water for producing bio-oil, water-soluble organics, gaseous products and char. Black liquor mainly contains cooking chemicals (mainly alkali salts) lignin and the hemicellulose parts of the wood chips used for cellulose digestion. This review explores the effects of different process parameters, solvents and catalysts for the HTL of black liquor or black liquor-derived lignin. Using short residence times under near- or supercritical water conditions may improve both the quality and the quantity of the bio-oil yield. The quality and yield of bio-oil can be further improved by using solvents (e.g., phenol) and catalysts (e.g., alkali salts, zirconia). However, the solubility of alkali salts present in black liquor can lead to clogging problem in the HTL reactor and process tubes when approaching supercritical water conditions.

Hyperpolarization of metabolites by dissolution dynamic nuclear polarization (D-DNP) for MRI applications often requires fast and efficient removal of the radicals (polarizing agents). Ordered mesoporous SBA-15 silica materials containing homogeneously dispersed radicals, referred to as HYperPolarizing SOlids (HYPSOs), enable high polarization – P(¹H) = 50% at 1.2 K – and straightforward separation of the polarizing HYPSO material from the hyperpolarized solution by filtration. However, the one-dimensional tubular pores of SBA-15 type materials are not ideal for nuclear spin diffusion, which may limit efficient polarization. Here, we develop a generation of hyperpolarizing solids based on a SBA-16 structure with a network of pores interconnected in three dimensions, which allows a significant increase of polarization, i.e. P(¹H) = 63% at 1.2 K. This result illustrates how one can improve materials by combining a control of the incorporation of radicals with a better design of the porous network structures.

Active phase loss mechanisms from Ru/AC catalysts were studied in continuous supercritical water gasification (SCWG) for the first time by analysing the Ru content in process water with low limit-of-detection time-resolved ICP-MS. Ru loss was investigated alongside the activity of commercial and in-house Ru-based catalysts, showing very low Ru loss rates compared to Ru/metal-oxides (0.2–1.2 vs. 10–24 μg g_Ru ⁻¹ h⁻¹, respectively). Furthermore, AC-supported Ru catalysts showed superior long-term SCWG activity to their oxide-based analogues. The impact on Ru loss of several parameters relevant for catalytic SCWG (temperature, feed concentration or feed rate) was also studied and was shown to have no effect on the Ru concentration in the process water, as it systematically stabilised to 0.01–0.2 μg_Ru L⁻¹ for Ru/AC. Looking into the type of Ru loss in steady-state operation, time-resolved ICP-MS confirmed a high probability of finding Ru in the ionic form, suggesting that leaching is the main steady-state Ru loss mechanism. In non-steady-state operation, abrupt changes in the pressure and flow rate induced important Ru losses, which were assigned to catalyst fragments. This is directly linked to irreversible mechanical damage to the catalyst. Taking the different observations into consideration, the following Ru loss mechanisms are suggested: 1) constant Ru dissolution (leaching) until solubility equilibrium is reached; 2) minor nanoparticle uncoupling from the support (both at steady state); 3) support disintegration leading to the loss of larger amounts of Ru in the form of catalyst fragments (abrupt feed rate or pressure variations). The very low Ru concentrations detected in process water at steady state (0.01–0.2 μg_Ru L⁻¹) are close to the thermodynamic equilibrium and indicated that leaching did not contribute to Ru/AC deactivation in SCWG.

Lignin is a promising resource for the sustainable production of platform chemicals and biofuels. The paper industry produces large quantities of lignin every year, mostly dissolved in a black liquor. With the help of hydrothermal liquefaction, black liquor can be used directly as a feedstock to depolymerize the lignin to desired products. However, because various cooking chemicals (e.g., NaHS, NaOH) used in the Kraft process, dominant in the paper industry, are also dissolved in the black liquor, it is necessary to study in detail their influence on the process as well as their fate. In this work, the focus was on the fate of sulfur and the influence of sulfide (HS^-). For this purpose, hydrothermal liquefaction experiments (250-400 °C) were carried out with black liquor and self-prepared model black liquor with different sulfide concentrations (0-3 g·L^-1 HS^-) in batch reactors (V = 25 mL), and the products were analyzed to understand the chemical pathways involving sulfur. It was found that the inorganic sulfur compounds react with organic matter to produce organic sulfur compounds. Dimethyl sulfide is the most abundant of these products. The HS^- concentration correlates with the amount of dimethyl sulfide produced. Because methanethiol has also been qualitatively detected, the reaction mechanism of Karnofski et al. for the formation of dimethyl sulfide in the Kraft process also applies to the hydrothermal liquefaction of black liquor. Increased sulfide concentration in the feed leads to an accelerated depolymerization of lignin. In contrast, the yields of some aromatic monomers decrease slightly, possibly as a result of repolymerization reactions also occurring more quickly.