Hyperspectral imaging can simultaneously obtain the spatial morphological information of the ground objects and the fine spectral information of each pixel. Through the quantitative analysis of the spectral characteristics of objects, it can complete the task of classification and recognition of ground objects. The appearance of imaging spectrum technology provides great advantages for military target detection and promotes the continuous improvement of military reconnaissance levels. At the same time, spectral camouflage materials and methods that are relatively resistant to hyperspectral reconnaissance technology are also developing rapidly. In order to study the reconnaissance effect of visible/near-infrared hyperspectral images on camouflage targets, this paper analyzes the spectral characteristics of different camouflage targets using the hyperspectral images obtained in the visible and near-infrared bands under natural conditions. Two groups of experiments were carried out. The first group of experiments verified the spectral camouflage characteristics and camouflage effects of different types of camouflage clothing with grassland as the background; the second group of experiments verified the spectral camouflage characteristics and camouflage effects of different types of camouflage paint sprayed on boards and steel plates. The experiment shows that the hyperspectral image based on the near-infrared band has a good reconnaissance effect for different camouflage targets, and the near-infrared band is an effective “window” band for detecting and distinguishing true and false targets. However, the stability of the visible/near-infrared band detection for the target identification under camouflage paint is poor, and it is difficult to effectively distinguish the object materials under the same camouflage paint. This research confirms the application ability of detection based on the visible/near-infrared band, and points out the direction for the development of imaging detectors and camouflage materials in the future.
Hyperspectral reconnaissance technology can realize three-dimensional reconnaissance by using target space and spectral information, which effectively improves the efficiency of battlefield reconnaissance. However, in order to obscure what is true and what is false to confuse the enemy, camouflage technology is also developing. Hiding the target in the background environment and setting false targets have become common camouflage procedures on the battlefield. The camouflaged target has very similar spatial and spectral characteristics to the real target, so the method of identifying the camouflaged target according to the similarity threshold of the original spectral data is no longer reliable. In order to solve the problem of high spectral similarity and low discrimination between a camouflaged target and a real target in a hyperspectral image, a joint processing method of spatial spectrum information is adopted in this paper. Firstly, the hyperspectral image is preprocessed, and then the target area to be measured is determined. Finally, the dimensions of the determined sensitive small area are reduced. Experiments show that this processing method can effectively reduce the spectral similarity of true and false targets, increase the spectral difference of true and false targets and improve the ability to identify true and false targets based on hyperspectral images.
14 March 2024 in EURASIP Journal on Advances in Signal Processing
Target detection based on hyperspectral images refers to the integrated use of spatial information and spectral information to accomplish the task of localization and identification of targets. There are two main methods for hyperspectral target detection: supervised and unsupervised methods. Supervision method refers to the use of spectral differences between the target to be tested and the surrounding background to identify the target when the target spectrum is known. In ideal situations, supervised object detection algorithms perform better than unsupervised algorithms. However, the current supervised object detection algorithms mainly have two problems: firstly, the impact of uncertainty in the ground object spectrum, and secondly, the universality of the algorithm is poor. A hyperspectral target detection framework based on 3D–2D CNN and transfer learning was proposed to solve the problems of traditional supervised methods. This method first extracts multi-scale spectral information and then preprocesses hyperspectral images using multiple spectral similarity measures. This method not only extracts spectral features in advance, but also eliminates the influence of complex environments to a certain extent. The preprocessed feature maps are used as input for 3D–2D CNN to deeply learn the features of the target, and then, the softmax method is used to output and obtain the detection results. The framework draws on the ideas of integrated learning and transfer learning, solves the spectral uncertainty problem with the combined similarity measure and depth feature extraction network, and solves the problem of poor robustness of traditional algorithms by model migration and parameter sharing. The area under the ROC curve of the proposed method has been increased to over 0.99 in experiments on both publicly available remote sensing hyperspectral images and measured land-based hyperspectral images. The availability and stability of the proposed method have been demonstrated through experiments. A feasible approach has been provided for the development and application of specific target detection technology in hyperspectral images under different backgrounds in the future.
Recently, infrared polarization imaging technology has become a research hotspot due to its ability to better resolve the physicochemical properties of objects and significantly enhance the target characteristics. However, the traditional infrared polarization imaging is limited to similar imaging mechanism restrictions, and it is difficult to acquire the polarization information of a wide-area posture in real time. Therefore, we report a combination of hardware and software for super-wide-field-of-view long-wave infrared gaze polarization imaging technology. Utilizing the non-similar imaging theory and adopting the inter-lens coupling holographic line-grid infrared polarization device scheme, we designed the infrared gazing polarized lens with a field-of-view of over 160°. Based on the fusion of infrared intensity images and infrared polarization images, a multi-strategy detail feature extraction and fusion network is constructed. Super-wide-field-of-view (150°×120°), large face array (1040×830), detail-rich infrared fusion images are acquired during the test. We have accomplished the tasks of vehicle target detection and infrared camouflage target recognition efficiently using the fusion images, and verified the superiority of recognizing far-field targets. Our implementation should enable and empower applications in machine vision, intelligent driving, and target detection under complex environments.
The imaging spectrometer is limited by short response time and narrow channel, resulting in low signal-to-noise ratio of hyperspectral images. The accurate estimation of noise has a significant impact on some preprocessing and downstream tasks. The existing noise estimation methods for hyperspectral images are all focused on satellite and aviation data, and there is little research on hyperspectral images with high spatial resolution. For this type of image, This article proposes a noise estimation method based on a stacked autoencoder. Firstly, the image is divided into multiple uniform regions using the K-means algorithm, and then a stacked automatic encoder is set for each uniform region. Reconstruct the spectral signal on each pixel through the corresponding stacked automatic encoder. Calculate the residual between the reconstructed image and the original image to achieve signal-to-noise separation. Finally, the image is divided into a large number of subblocks, and the subblocks containing edges are removed. The remaining subblocks are used for noise estimation in this band. The applicability of some classic noise estimation methods was experimentally tested, and the effectiveness and stability of the proposed method were verified through simulation and real data experiments.
In land-based spectral imaging, the spectra of ground objects are inevitably affected by the imaging conditions (weather conditions, atmospheric conditions, light conditions, zenith and azimuth angle conditions) and spatial distribution of targets, leading to uncertainties featured by “same object different spectrum”. That is, the spectrum of a ground object may change within a certain range under different imaging conditions. Traditional target detection (TD) methods are mainly based on similarity measurements and do not fully account for the spectral uncertainties. These detection methods are prone to false detections or missed detections. Therefore, reducing the impact of spectral uncertainties on TD is an important research topic in hyperspectral imaging. In this paper, we first review traditional TD methods and compare their principles and characteristics. It is found that the spectral correlation angle (SCA) method has good adaptability in land-based imaging. The shortcoming of the SCA method that it cannot reflect the local spectrum characteristics, is also analyzed. As the effect of spectral uncertainties cannot be completely overcome by the SCA method, a new similarity measurement method, the weighted spectral correlation angle (WSCA) method, is proposed. It can reduce the influence of spectral uncertainties on TD by increasing the weight of particular bands. Finally, we use two sets of experiments to analyze the effect of the WSCA method on TD. Its performance in overcoming spectral uncertainties caused by variations in imaging conditions or uneven spatial distributions of targets is tested. The results show that the WSCA method can effectively reduce the influence of spectral uncertainties and obtain a good detection result. Graphical Abstract