Cavitation, as a unique technology for influencing liquid substances, has attracted much attention in the oil refining industry. The unique capabilities of cavitation impact can initiate the destruction of molecular compounds in the liquid. At the same time with a large number of successful experimental studies on the treatment of liquid hydrocarbon raw materials, cavitation has not been introduced in the oil refining industry. Often the impossibility of implementation is based on the lack of a unified methodology for assessing the intensity and threshold of cavitation creation. The lack of a unified methodology does not allow for predicting the intensity and threshold of cavitation generation in different fluids and cavitation-generating devices. In this review, the effect of cavitation on various rheological properties and fractional composition of liquid hydrocarbons is investigated in detail. The possibility of using the cavitation number as a single parameter for evaluating the intensity and threshold of cavitation generation is analyzed, and the limitations of its application are evaluated. The prospects of introducing the technology into the industry are discussed and a new vision of calculating the analog of cavitation numbers based on the analysis of the mutual influence of feedstock parameters and geometry of cavitators on each other is presented.
The article describes the research work having a main objective of creation of the system for regeneration of air in production rooms allowing to carry out recirculation of the polluted air without a branch on the basis of research of behavior of fine dust fractions (aerosols) of various nature in the non-uniform electric field (the crown charge) under conditions of action of electric, gravitational, aerodynamic and other perturbations. Definition of the principles alongside with the development of management methods for fine fraction particles with the set physical characteristics will allow development of the adequate mathematical behavior models of aerosols in the non-uniform electric field.
The preservation of fresh-cut fruits and vegetables through dehydration is undergoing a paradigm shift to overcome quality degradation and high energy intensity associated with conventional thermal drying. This review synthesizes advancements in innovative pretreatments, focusing on their mechanisms, synergistic effects, and industrial readiness. Non-thermal pretreatment (NTP) methods—including Pulsed Electric Fields (PEF), Ultrasound (US), Cold Plasma (CP), and High-Pressure Processing (HPP)—are evaluated alongside optimized Osmotic Dehydration (OD) and Freeze-Thaw (FT) cycles. Analysis reveals these technologies enhance drying kinetics, reducing processing time by 20–55%, while improving bioactive retention by 30–95%. A critical discussion of Technology Readiness Levels (TRL) distinguishes commercially mature solutions like OD (TRL 9) and HPP (TRL 8–9) from emerging pilot-scale concepts like US and PEF (TRL 6–7). Cold Plasma remains at TRL 4–5 due to uniformity challenges. Furthermore, the higher capital expenditure of innovative systems is mitigated by operational energy savings (up to 50%) and “clean label” premiums. This paper provides a strategic framework to optimize pretreatment selection based on tissue matrices and economic viability.
Problems of transforming heavy crude high-sulfur oil into low-sulfur fuels and oils become increasingly urgent for oil refineries. The main reason for that is depletion of low-sulfur oil-fields and following rise of heavy crude oil share in world's oil production. Desulfurization of oil and petroleum residues is performed by breaking down or extraction of sulfur and sulfur compounds with catalyst and chemical additives which leads to considerable rise in price of refinery. Desulfurization technology proposed in the following research involves simultaneous use of the acoustic and hydrodynamical cavitation for breaking down long molecular connections. Oil refinery was performed in the electromechanical vortex layer activator which intensified mechanoactivation processes by intensive movement of ferromagnetic elements in the external magnetic field.