Aristeidis Bloutsos

Dr. Aristeidis Bloutsos


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 August 2020 in Fluids
Verified
Journal Article
Open access
PDF file
ABAristeidis Bloutsos
Aristeidis Bloutsos
PYPanayotis C. Yannopoulos
Panayotis C. Yannopoulos
The flow formed by the discharge of inclined turbulent negatively round buoyant jets is common in environmental flow phenomena, especially in the case of brine disposal. The prediction of the mean flow and mixing properties of such flows is based on integral models, experimental results and, recently, on numerical modeling. This paper presents the results of mean flow and mixing characteristics using the escaping mass approach (EMA), a Gaussian model that simulates the escaping masses from the main buoyant jet flow. The EMA model was applied for dense discharge at a quiescent ambient of uniform density for initial discharge inclinations from 15° to 75°, with respect to the horizontal plane. The variations of the dimensionless terminal centerline and the external edge’s height, the horizontal location of the centerline terminal height, the horizontal location of centerline and the external edge’s return point as a function of initial inclination angle are estimated via the EMA model, and compared to available experimental data and other integral or numerical models. Additionally, the same procedure was followed for axial dilutions at the centerline terminal height and return point. The performance of EMA is acceptable for research purposes, and the simplicity and speed of calculations makes it competitive for design and environmental assessment studies.

13 June 2025 in Environmental Fluid Mechanics
Verified
Journal Article
Open access
PDF file
MSMaria K. Stefanidou
Maria K. Stefanidou
ABAristeidis Bloutsos
Aristeidis Bloutsos
Athanassios A. DimasAthanassios A. Dimas
Athanassios A. Dimas
PYPanayotis C. Yannopoulos
Panayotis C. Yannopoulos
Annular plumes discharged in stable and uniform environments of greater density than the initial plume density were simulated to detect and explain possible existing differences compared to available experimental data. Two cases were simulated numerically with exit velocities of 0.527 and 0.702 m/s; exit/ambient temperatures of 68.5/23 °C; outer/inner annular source diameters of 0.13/0.11 m; equivalent densimetric Froude numbers of 1.63 and 2.12 and Reynolds numbers of 2380 and 3171. These cases have recently been investigated experimentally (Stefanidou et al. in Environ Fluid Mech 23:965–1010, 2023, https://doi.org/10.1007/s10652-023-09943-z). For quasi-steady-state conditions, the annular plume is simulated by employing the Reynolds-averaged Navier–Stokes equations via the k–ε-realizable turbulence model and the large-eddy simulation (LES) via the wall-adapting local eddy viscosity (WALE) subgrid stress turbulence model of ANSYS© Fluent software. The results regarding the centreline mean velocity and mean relative concentration were compared with the above experimental measurements, with an exit velocity of 0.527 m/s, and proved that LES-WALE is better at predicting the annular plumes. Thus, the latter was used to simulate both above cases. In general, the predictions agree well with the measurements regarding the mean flow and mixing characteristics in the core region and the region beyond the core. The results for the turbulent intensities of velocities and temperature were also obtained for both the core and beyond the core regions. The transverse profiles of the mean axial velocity and mean relative concentration were used to determine the corresponding spreading coefficients, which were in good agreement with literature experimental data regarding equivalent round plumes.

24 January 2022 in Processes
Verified
Journal Article
Open access
PDF file
ABAristeidis Bloutsos
Aristeidis Bloutsos
PYPanayotis C. Yannopoulos
Panayotis C. Yannopoulos
The air temperature variation of a closed room, well insulated, during the initial time of operation of air-conditioning systems up to temperature stabilization, is simulated by a two-dimensional integral model as a quasi-steady-state phenomenon. The model equipped with a conservation equation for tracer concentration or relative temperature, including the stratification parameter, is well qualified. The flow leaving the air conditioning device forms an inclined buoyant jet which bends over and meets the room floor, where it spreads sideways forming a layer with jet temperature. A sequence of layers, which affect the jet temperature through entrainment, are produced by a novel bottom-up technique. The layer air temperatures are calculated through the bulk dilution of a near bottom jet cross-section, which feeds each new layer. The model simulated a real case and predicted the transient variation of room air and buoyant jet temperatures up to stabilisation. It also predicted the time needed for stabilisation, the cooling rates of the room and jet air temperatures, the Brunt-Väisälä frequency occurring during the temperature transitions, and more. The results are promising as they agree with observations. Thus, the model could be used to evaluate the effectiveness of relevant HVAC systems operating in such rooms.

9 May 2022 in Environmental Processes
Verified
Journal Article
Closed access
PDF file
ABAristeidis Bloutsos
Aristeidis Bloutsos
PYP. C. Yannopoulos
P. C. Yannopoulos

15 March 2024 in Water, Air, & Soil Pollution
Verified
Journal Article
Closed access
PDF file
ABAristeidis Bloutsos
Aristeidis Bloutsos
VSVasiliki I. Syngouna
Vasiliki I. Syngouna
IMIoannis D. Manariotis
Ioannis D. Manariotis
PYPanayotis C. Yannopoulos
Panayotis C. Yannopoulos

1 August 2023 in Environmental Fluid Mechanics
Verified
Journal Article
Open access
PDF file
MSMaria K. Stefanidou
Maria K. Stefanidou
ABAristeidis Bloutsos
Aristeidis Bloutsos
PYPanayotis C. Yannopoulos
Panayotis C. Yannopoulos
Thermal plumes issued with mean exit velocities of 0.527 and 0.702 m/s from internally closed annular nozzles are investigated experimentally, theoretically, and numerically. The experimental setup and the measurement and analysis methodologies for flow and mixing are described in detail. The experimental setup consists of an air heating box with an annular slot of 0.12-m mean diameter and 0.01-m width, accompanied by equipment for setup operation and measurement of mean velocities and temperatures. The trajectory of maximum velocities and the isovelocity contours indicate reattachment due to plume self-merging at $$z_{\textrm{P0}}= 0.161$$ z P0 = 0.161 m and around 0.20 m in correspondence to exit velocities. It was found that $$z_{\textrm{P0}}$$ z P0 depends mainly upon initial Froude number and annulus equivalent diameter. Experiments detected a vortex ring right after the exit followed by a stagnation point at $$z_{\textrm{P1}}\cong 0.055$$ z P1 ≅ 0.055 m on the plume centreline. The annular plume core obtains almost uniform temperature and on average 15 times higher dilutions than bulk dilutions of the equivalnt round plume. To predict the self-merging trajectory, a novel integral model was developed named self-merging approach (SMA). SMA is based on the solution of the ordinary differential equations of momentum and buoyancy applied to an infinitesimal sector of the annular plume, which is equivalent to two identical slot plumes. These plumes are reattached due to outer entrainment, inner entrainment starvation, and a series of sinks along the annular plume centreline with strengths calculated by an original relationship. SMA predictions agree very well with the observations. The present findings contribute to a better understanding of the phenomenon and offer new ideas for designing buoyancy-operating disposal systems with low momentum, using annular- or rosette-type diffusers mainly in shallow water bodies.