The Chinese Ocean Salinity Satellite is dedicated to global sea surface salinity (SSS) mapping with two payloads onboard, which are the interferometric microwave radiometer (IMR) and the microwave imager combined active and passive (MICAP), both using the interferometric aperture synthesis radiometry. One of the payloads is an L-band interferometric radiometer system with a Y-shaped antenna array. The other one, MICAP, is a 1-D passive/active combined system, where the L-, C-, and K-band interferometric radiometers’ antenna arrays are arranged in a line, and the active device is an L-band scatterometer. Based on the payload configurations, a series of simulations is applied to analyze the payloads performance, including the brightness temperature (TB) characteristic, the SSS accuracy, and the effects of Sun and land contamination. The TB simulation results show that the IMR possesses a finer spatial resolution compared to the MICAP L-band radiometer, whereas the latter achieves a better TB radiometric resolution. With the assistance of the C- and K-band radiometers and the L-band scatterometer, the combined retrieval accuracy improves compared with the SSS retrieved using only L-band TB and auxiliary parameters. The best accuracy of SSS is achieved when considering all the available measurements from two payloads together in a combined retrieval. Finally, the results related to Sun and land contamination that endanger the interferometric radiometer measurements are presented and discussed. The performance simulation in this article has been used as a reference for the design phase of two payloads and will be updated with the development of payload manufacture.

The Chinese Ocean Salinity Satellite is designed to monitor global sea-surface salinity (SSS). One of the main payloads onboard the Chinese Ocean Salinity Satellite, named the Interferometric Microwave Radiometer (IMR), is a two-dimensional interferometric radiometer system with an L-band, Y-shaped antenna array. The comparison of two different array orientations is analyzed by an end-to-end simulation based on the configuration of the IMR. Simulation results of the different array orientations are presented and analyzed, including the brightness temperature (TB) images, the distribution of the incidence angles in the field of view, the TB radiometric resolutions, the spatial resolutions, the number of measurements in the Earth grid and the expected SSS accuracy. From the simulations we conclude that one of the array orientations has better performance for SSS inversion than the other one. The advantages mainly result in wider swath and better SSS accuracy at the edge of the swath, which then improve the accuracy of the monthly SSS after averaging. The differences of the Sun’s effects for two different array orientations are also presented. The analysis in this paper provides the guidance and reference for the in-orbit design of the array orientation for the IMR.

The China France Oceanography Satellite (CFOSAT) was launched on October 29, 2018, and is equipped with two sensors: a space-borne rotating fan beam scatterometer (CSCAT) and a space-borne surface wave investigation and monitoring (SWIM) radar. The CSCAT is dedicated to monitoring sea surface winds (SSWs), and the SWIM radar is designed to measure surface ocean waves. In this study, CSCAT SSW products during global tropical cyclones (TCs) were validated using wind data from multiple sources, including European Center for Medium-Range Weather Forecasts (ECMWFs) reanalysis (ERA5), cross-calibrated multi-platform (CCMP), soil moisture active passive (SMAP), WindSat, HY-2B, advanced scatterometer (ASCAT), and buoy wind. Wave parameters (significant wave height (SWH), dominant direction, and wavelength) were validated using wave data from ERA5, Jason3, and the HY-2B altimeter. The results show the following: 1) errors of the CFOSAT wind speed (WS) and SWH increase with the enhancement of TC intensity; 2) the WS accuracy of wind vector cells (WVCs) near the nadir is better than that at the nadir and the edge of the swath; 3) the wind direction (WD) correlation between the CSCAT and ERA5, ASCAT, and WindSat is more obvious at high WSs (>20 m/s) than at lower WSs (< 6 m/s); 4) the accuracy of the SWIM off-nadir SWH product is lower than that of the nadir SWH; and 5) a triple collocation comparison among the CFOSAT SSW, ERA5 SSW, and WindSat SSW indicates that the CFOSAT SSW provides the best performance.

Long-term and stable brightness temperature (TB) measurements observed by microwave radiometers are of great significance in studying the variation in geophysical parameters and their trend analysis. A modified vicarious cold reference (MVCR) method for the scanning microwave radiometer (SMR) TBs onboard the Haiyang-2B (HY-2B) satellite is developed and used to estimate the stability of the TBs of L2A-TB and L2A-TC, which corresponds to TBs before and after intercalibration, respectively. Data from November 1, 2018, to October 31, 2021, are used for the stability assessment. The results show that there are several channels in L2A-TB with annual drifts of TBs greater than 0.1 K per year (K/year), while the TBs of L2A-TC after intercalibration are quite stable, with annual drifts that are all less than 0.1 K/year. In conclusion, the SMR TBs after intercalibration achieve better stability. The robustness of the MVCR method is demonstrated using simulated SMR TBs. After removing the annual harmonics, the coldest TB sequence is more stable, and a more realistic annual drift can be obtained.

This paper provides an overview of the Dragon 4 project dealing with operational monitoring of sea ice and sea surface salinity (SSS) and new product developments for altimetry data. To improve sea ice thickness retrieval, a new method was developed to match the Cryosat-2 radar waveform. Additionally, an automated sea ice drift detection scheme was developed and tested on Sentinel-1 data, and the sea ice drifty capability of Gaofen-4 geostationary optical data was evaluated. A second topic included implementation and validation of a prototype of a Fully-Focussed SAR processor adapted for Sentinel-3 and Sentinel-6 altimeters and evaluation of its performance with Sentinel-3 data over the Yellow Sea; the assessment of sea surface height (SSH), significant wave height (SWH), and wind speed measurements using different altimeters and CFOSAT SWIM; and the fusion of SSH measurements in mapping sea level anomaly (SLA) data to detect mesoscale eddies. Thirdly, the investigations on the retrieval of SSS include simulations to analyse the performances of the Chinese payload configurations of the Interferometric Microwave Radiometer and the Microwave Imager Combined Active and Passive, SSS retrieval under rain conditions, and the combination of active and passive microwave to study extreme winds.

Using the PMTred algorithm (penalized maximum T test) and the detailed metadata archive, the monthly mean sea surface temperature (SST) datasets from 1960 to 2011 have been detected and adjusted. Results show that the SST time series has serious problems of inhomogeneity. The changes in observation instruments and observation system are the main causes of the discontinuity. For the monthly SST time series, the negative adjustments have the high proportion, which may be greatly due to the SST decreasing after automation. It is found that the annual mean SST trends have changed obviously before and after adjusted. The increasing trend of annual mean SST after adjustment is higher than before, by up to 0.252 °C/10 yr.