An emergency evacuation route is an important component of emergency rescue of for nuclear accidents. A reasonable evacuation route can reduce evacuation times and protect people’s life. The evacuation route of the nuclear power plant is abstracted into a network diagram and a mathematical model of evacuation optimization route based on the graph theory and the parity of spot diagram method in this paper. Road traffic capacity and other external factors that may affect emergency evacuation are considered in the time weight factor for each road. Finally, an example is given to verify the feasibility of the model.
Attachment changing in demolition robots has a high docking accuracy requirement, so it is hard for operators to control this process remotely through the perspective of a camera. To solve this problem, this study investigated positioning error and proposed a method of error compensation to achieve a highly precise attachment changing process. This study established a link parameter model for the demolition robot, measured the error in the attachment changing, introduced a reference coordinate system to solve the coordinate transformation from the dock spot of the robot’s quick-hitch equipment to the dock spot of the attachment, and realized error compensation. Through calculation and experimentation, it was shown that the error compensation method proposed in this study reduced the level of error in attachment changing from the centimeter to millimeter scale, thereby meeting the accuracy requirements for attachment changing. This method can be applied to the remote-controlled attachment changing process of demolition robots, which provides the basis for the subsequent automatic changing of attachments. This has the potential to be applied in nuclear facility decommissioning and dismantling, as well as other radioactive environments.
The process of changing the attachment of a demolition robot is a complex operation and requires a high docking accuracy, so it is hard for operators to control this process remotely through the camera’s perspective. To solve this problem, this paper studies trajectory planning for changing a demolition robot attachment. This paper establishes a link parameter model of the demolition robot; the position and attitude of the attachment are obtained through a camera, the optimal docking point is calculated to minimize the distance error during angle alignment for attachment change, the inverse kinemics of the demolition robot are solved, the trajectory planning algorithm and visualization program are programmed, and then the trajectory planning for the demolition robot attachment changing method is proposed. The results of calculations and experiments show that the method in this paper can meet the accuracy, efficiency, and safety requirements of demolition robot attachment changing, and it has promising application prospects in the decommissioning and dismantling of nuclear facilities and other radioactive environments.
The development of nuclear power is a major measure for implementing energy-saving and emission reduction strategies all over the world. For a long time, the hazards of nuclear accidents have been obstacles to the development of nuclear power. Temporary evacuation is the fastest and most effective emergency measure to ensure the safety of residents in a short period of time after a nuclear accident. Numerous nuclear accident emergency management personnel make judgments based on personal work experience and subjective awareness when formulating a nuclear accident emergency evacuation plan. How to make a scientific and reasonable decision on the emergency evacuation of nuclear accidents in the shortest time is a common problem faced by many emergency departments when a nuclear accident occurs. In a complex and ever-changing radiation environment, how to maximize the use of limited information and make decisions quickly in an uncertain environment is a core issue that effectively reduces the risk of nuclear accidents. This paper constructs a set of assessment system of nuclear accident emergency evacuation plan selection based on the characteristics of nuclear accident emergencies under uncertain environmental conditions. It uses triangular fuzzy language to describe nuclear accident emergency evacuation decision plans and the weighting of relevant factors. Additionally, the K-means clustering method is used to calculate the weight of experts, which reduces the influence of subjective factors considered by decision makers. Finally, a decision model for emergency evacuation of nuclear accidents is constructed based on the TOPSIS decision model.
Radon is internationally recognized as one of the seven seismic precursors. A self-assembly ultrasonic generator and experimental apparatus for radon measurement were utilized to explore the radon exhalation regularities of water-bearing porous media under different ultrasonic intensities. The experimental results showed that there was a coupling relationship among radon exhalation rate, moisture content, and ultrasonic frequency. With the increase of the frequency of the ultrasonic wave, its effect on the promotion of radon exhalation rate was found to be a more obviously positive linear correlation. The radon exhalation rate, which could climb to a maximum value of 0.179 Bq·m−2·s−1 in a naturally air-dried sample, increased at first and then decreased along with increased moisture content. Moreover, this study found that the ultrasonic wave had the most remarkable promoting effects on the radon exhalation rate of porous media with high moisture content, and there is a positive linear correlation between the growth rate of the radon exhalation rate and moisture content. The experimental results could provide a beneficial reference for the continual monitoring of radon in a seismically active belt and an explanation of radon anomalies; however, the proposed experimental model was simplified, so further insights are strictly required for a reliable correlation with the real monitoring of radon in a seismically active belt.