Shock wave compression of poled PZT95/5 ceramics results in rapid depoling and a release of bound charge. Porous PZT95/5 ceramics are superior to dense ceramics in high-voltage breakdown resistance under shock-wave loading. In this article, the mechanical and electrical responses of porous poled PZT95/5 ceramics under uniaxial stresses at different strain rates were investigated using the servo-hydraulic MTS810 universal test machine and the improved split Hopkinson pressure bar system. The engineering stress vs. axial and radial engineering strain curves of porous poled PZT95/5 ceramics under different strain rates exhibit anomalous nonlinear behavior. The nonlinear behavior and depolarization mechanism of porous poled PZT95/5 were attributed to the domain switching and phase transformation. By comparing the stress–strain curves of the porosity porous poled PZT95/5 ceramics at different strain rates, an obvious strain rate sensitivity of mechanical behavior can be found, and the strain rate sensitivity decreases with the increase of porosity. The critical stress of domain switching and phase transformation and the strength increased with increasing strain rate. In addition, their normalized values showed a logarithmic relationship with the strain rate. Finally, we suggest that the maximum polarization released is nearly independent of stress state and strain rate, and it only depends on the porosity.
The spalling behavior of ductile metals is a process involving void nucleation, growth, and coalescence. Limited by diagnostic techniques, spallation experiments only provide the free surface velocity profiles and the information about recovered targets, but some quantitative damage evolution information about the spalling target is lacking. In this research, the damage nucleation seeds are randomly arranged on the grain boundary in the central region of a target with grain geometry, and a two-dimensional mesoscale numerical model of a plate impact spall experiment is established. By analyzing the free surface velocity profile and the stress history, it is demonstrated that the spall strength obtained with the pull-back velocity essentially corresponds to the maximum tensile stress at the target center. The effects of the impact stress and the stress pulse duration on the dynamic characteristics of the void growth and coalescence are analyzed in-depth by using the damage evolution dissipation energy and the plastic strain contours at different times. The dynamic process of the damage evolution determines the characteristics of the oscillation after the pull-back signal. The stress history controls the damage degree and the kinetic process of the target in the spallation damage process. The impact stress has the most important effect in determining the damage evolution rate, while the stress pulse duration only affects the void coalescence process and irrelevant to the void growth. The damage degree of the void growth and the coalescence process are the result of the joint action of the impact stress and the pulse duration.
6 September 2024 in Journal of Materials Engineering and Performance