Energy management strategy (EMS) has a profound influence over the performance of a fuel cell hybrid electric vehicle since it can maintain the energy sources in their high efficacy zones leading to efficiency and lifetime enhancement of the system. This paper puts forward an online multi-mode EMS to efficiently split the power among the components while embracing the effects of the driving conditions and performance degradation of the fuel cell system. In this regard, firstly, a self-organizing map (SOM) is trained to cluster the driving patterns. The SOM competitive layer in this work is composed of ten driving features as inputs and it classifies the driving patterns into three classes in the output. Subsequently, a three-mode fuzzy logic controller (FLC) is designed and optimized offline by the genetic algorithm for each driving pattern. Unlike the other similar works, the output membership function of the FLC is designed based on the online identification of the maximum power and efficiency of the fuel cell system which change over time. Finally, the SOM is utilized to recognize the driving mode at each sequence and accordingly activate the most suitable mode of the FLC to meet the requested power by efficient use of the energy sources. The performance of the proposed EMS has been validated by using the hardware-in-the-loop platform for several scenarios. The experimental results analyses indicate the promising performance of the suggested methodology in terms of ameliorating hydrogen economy and the fuel cell system lifetime.
12 May 2020 in IEEE Transactions on Industrial Electronics
This paper addresses the design of a systemic management to improve the energetic efficiency of an open cathode proton exchange membrane fuel cell (PEMFC) in a hybrid system. Unlike the other similar works, the proposed approach capitalizes on the usage of both thermal management strategy and current control to meet the requested power from the system by the minimum fuel consumption. To do so, firstly, an experimentally based 3D mapping is performed to relate the requested power form the PEMFC to its operating temperature and current. Secondly, the reference temperature which leads to gaining the demanded power by the minimum current level is determined to minimize the hydrogen consumption. Finally, the temperature control is formulated by an optimized fuzzy logic scheme to reach the determined reference temperature by acting on the cooling fan of the PEMFC system, whilst the current is being regulated by its controller. The inputs of the fuzzy controller are the PEMFC current and temperature error and the sole output is the duty factor of the fan. The proposed methodology is tested on an experimental test bench to be better evaluated in a real condition. The obtained results from the proposed systemic management indicate promising enhancement of the system efficiency compared to a commercial controller. The proposed method of this work is extendable and applicable in fuel cell hybrid electric vehicles.