A new proton conducting material with a possible application as a membrane in fuel cells is synthesized. It is formed by nanocrystalline cellulose (NCC) doped with a different concentration of the imidazole molecules (Im) used as “dry” conducting species. The nanocomposites (NCC-Im) are obtained in the form of films. Their chemical composition, thermal properties, and the electric conductivity are determined by elementary and thermogravimetric analysis, differential scanning calorimetry and impedance spectroscopy methods, respectively. The nanocomposite (1.7NCC-Im) with the highest concentration of imidazole i.e. one Im per 1.7 glucose unit shows the highest electrical conductivity equal to 2.7 × 10−2 S/m at 140 °C. This value is about five orders of magnitude higher than that of the pure NCC film at this same temperature. The important feature is that it is obtained for nanocomposite under anhydrous conditions.
The first successful attempt to synthesize a new proton conducting polymeric nanocomposite film based on pure cellulose nanofibers (CNF) as a polymer matrix functionalized on their surface with imidazole molecules (Im) as a dopant, was made. The 2CNF-Im nanomaterial contains on average one molecule of imidazole per 2 glucose units from cellulose chains. Water evaporation and thermal stability of 2CNF-Im were studied by thermogravimetric analysis (TGA and DTG) and differential scanning calorimetry (DSC). The temperature dependence of electrical conductivity was studied by the impedance spectroscopy. At 140 °C, the 2CNF-Im nanocomposite has a maximum conductivity of 7.0 × 10−3 S/m, i.e. four orders of magnitude higher than that of non-functionalized CNF matrix. The newly synthesized cellulose nanocomposite exhibits high electrical and thermal stability. In 2CNF-Im, the activation energy of the proton transport process is the lowest compared to the previously synthesized imidazole-functionalized composites based on other pure cellulose materials and equals 0.62 eV. The synthesized nanomaterial is liquid-free solid polymer electrolyte showing proton conductivity above the boiling point of water.
The search for solid electrolytes which have good proton conductivity in anhydrous conditions, thermal and mechanical stability, and are at the same time environmentally friendly and easy to manufacture is a big challenge which we have undertaken. This work presents new solid electrolytes based on cellulose nanocrystals with protic ionic liquid 1-methylimidazolium bis(trifluoromethylsulfonyl) imide (PIL) which have been obtained and whose thermal and conductivity properties and nanoscale organization has been determined. Two membranes were synthesized which differ as to the amount of absorbed PIL. They show excellent thermal stability up to 200 °C. The maximum value of ionic conductivity is about 10−2 S/m at 200 °C in anhydrous conditions and falls in the range of 10−3–10−2 S/m for temperatures from 150 to 200 °C. The correlation between the transport properties of membranes and their nanostructure has been probed by solid-state nuclear magnetic resonance spectroscopy. The thermal and conductivity properties of the new materials can compete with currently available membranes. Further work on a composite with a similar chemical composition should lead to obtaining a membrane capable of operating in next-generation fuel cells (T > 120 °C).
Nanocellulose-based nanocomposites exhibit properties dependent on nanocellulose morphology, affecting thermal, electrical, and molecular characteristics. The study compares imidazole-doped nanocomposites from cellulose nanofibers (CNFs) and nanocrystals (CNCs). Scanning electron microscopy shows CNFs form entangled networks, while CNCs form compact grains, influencing the imidazole’s interaction within the matrix. CNC-based composites have higher electrical conductivity (0.326 S/m at 150 °C) due to weaker imidazole hydrogen bonds and compact structure, facilitating proton transport. In contrast, CNF-based composites, with a disordered structure and stronger hydrogen bonds between imidazole and polymer matrix, exhibit lower conductivity (0.021 S/m at 140 °C) but enhanced thermal stability, degrading above 220 °C. Solid-state nuclear magnetic resonance (NMR) spectroscopy revealed two imidazole species: slowly and rapidly reorienting and exchanging protons. The activation energy for proton exchange and reorientation of imidazole is lower in the CNC-based composite (0.39 eV) than CNF-based (0.44 eV), indicating weaker hydrogen bonds. The CNF matrix is inhomogeneous, and the imidazole molecules bond in different environments. The wider activation energy distribution in CNF composites supports this conclusion. Heteronuclear correlation (1H-15N HETCOR NMR) spectroscopy identified imidazole bonding to cellulose OH groups and residual water. Proton transport involves imidazole reorientation and exchange via cellulose OH groups and water, contributing to conductivity.