In recent years more and more attention has been given to autogenous shrinkage due to the increasing use of high-performance concrete, which always contains supplementary materials. With the addition of supplementary materials—e.g., fly ash and blast furnace slag—internal relative humidity, chemical shrinkage and mechanical properties of cement paste will be affected. These properties significantly influence the autogenous shrinkage of cement paste. In this study, three supplementary materials—i.e., silica fume, fly ash and blast furnace slag—are investigated. Measurements of final setting time, internal relative humidity, chemical shrinkage, compressive strength and autogenous deformation of the cement pastes with and without supplementary materials are presented. Two water-binder ratios, 0.3 and 0.4, are considered. The effects of different supplementary materials on autogenous shrinkage of cement paste are discussed.
1 December 2020 in Construction and Building Materials
Alkali-activated slag and fly ash (AASF) materials are emerging as promising alternatives to conventional Portland cement. Despite the superior mechanical properties of AASF materials, they are known to show large autogenous shrinkage, which hinders the wide application of these eco-friendly materials in infrastructure. To mitigate the autogenous shrinkage of AASF, two innovative autogenous-shrinkage-mitigating admixtures, superabsorbent polymers (SAPs) and metakaolin (MK), are applied in this study. The results show that the incorporation of SAPs and MK significantly mitigates autogenous shrinkage and cracking potential of AASF paste and concrete. Moreover, the AASF concrete with SAPs and MK shows enhanced workability and tensile strength-to-compressive strength ratios. These results indicate that SAPs and MK are promising admixtures to make AASF concrete a high-performance alternative to Portland cement concrete in structural engineering.
15 June 2023 in Construction and Building Materials