Propylene/propane and ethylene/ethane separation was examined with Ag-exchanged X-type zeolite membrane (Ag-X membrane). The Na-X membrane was prepared on a porous tubular α-alumina support by a secondary growth method. The resulting Na-X membrane was ion-exchanged by using AgNO3 aq. Olefin selectivities in both mixtures were markedly improved after the ion exchange from Na to Ag cation. The Ag-X membrane exhibited a maximum propylene selectivity of 55.4 with a permeance of 4.13 × 10–8 mol m–2 s–1 Pa–1 at 353 K for a propylene/propane (50:50) mixture. This membrane also exhibited a maximum ethylene selectivity of 15.9 with a permeance of 9.04 × 10–8 mol m–2 s–1 Pa–1 at 303 K for an ethylene/ethane (50:50) mixture. We consider that the strong interaction between olefin and Ag cation plays an important role for the appearance of such high selectivity of olefin.
The efficient separation of hydrogen from methane and light hydrocarbons for clean energy applications remains a technical challenge in membrane science. To address this issue, we prepared a graphene-wrapped MFI (G-MFI) molecular-sieving membrane for the ultrafast separation of hydrogen from methane at a permeability reaching 5.8 × 10 6 barrers at a single gas selectivity of 245 and a mixed gas selectivity of 50. Our results set an upper bound for hydrogen separation. Efficient molecular sieving comes from the subnanoscale interfacial space between graphene and zeolite crystal faces according to molecular dynamic simulations. The hierarchical pore structure of the G-MFI membrane enabled rapid permeability, indicating a promising route for the ultrafast separation of hydrogen/methane and carbon dioxide/methane in view of energy-efficient industrial gas separation.
Isotopes of heavier gases including carbon (13C/14C), nitrogen (13N), and oxygen (18O) are highly important because they can be substituted for naturally occurring atoms without significantly perturbing the biochemical properties of the radiolabelled parent molecules. These labelled molecules are employed in clinical radiopharmaceuticals, in studies of brain disease and as imaging probes for advanced medical imaging techniques such as positron-emission tomography (PET). Established distillation-based isotope gas separation methods have a separation factor (S) below 1.05 and incur very high operating costs due to high energy consumption and long processing times, highlighting the need for new separation technologies. Here, we show a rapid and highly selective adsorption-based separation of 18O2 from 16O2 with S above 60 using nanoporous adsorbents operating near the boiling point of methane (112 K), which is accessible through cryogenic liquefied-natural-gas technology. A collective-nuclear-quantum effect difference between the ordered 18O2 and 16O2 molecular assemblies confined in subnanometer pores can explain the observed equilibrium separation and is applicable to other isotopic gases.
A novel preparation method was proposed for a metal-organic framework (MOF) monolith using a simple one-pot synthesis method. A MOF tubular monolith was successfully prepared by the hydrothermal treatment for an α-Al2O3 monolith in an aqueous solution of 1,3,5-benzenetricarboxylic acid and nitric acid without the addition of a metal source. The effects of temperature and the HNO3 concentration in the synthesis solution on the crystallization behavior of MIL-96 were studied. HNO3 enhanced the dissolution of the α-Al2O3 monolith and the growth of MIL-96. The growth rate of MIL-96 was also influenced by the synthesis temperature; a synthesis temperature of over 453 K was required for crystallization. The CO2 adsorption capacity of the prepared MIL-96 monoliths was evaluated and found to be comparable to that of the well-grown MIL-96 powdery crystal. Furthermore, the MIL-96 monoliths demonstrated good stability as their adsorption properties were retained even after 2 months of storage under atmospheric conditions.