Anode slime is an extremely valuable secondary resource for the recovery of silver and has attracted wide attentions. Effective metal recovery is usually constrained by either environmental hazards or high consumption of lixiviant for cyanide and non-cyanide leaching reagents. To tackle these issues in the process of silver recovery from anode slime, this research demonstrated a new leaching system with using an efficient oxidant which encapsulates cyanide into ferric complexes to ensure it not releasing into the environment while effective silver recovery was achieved. Comparing with the traditional tetra-amine copper oxidant, it was found that the dissolution rate of silver was significantly improved and leachate consumption was largely decreased. The effects of stirring speed, sodium thiosulfate concentration, oxidant concentration, solution pH and time on silver dissolution were investigated. When the novel system of iron-encapsulated cyanide was applied to extract silver from anode slime, the final conversion rates of silver was 97% after 60 minutes. This system has great potential in silver recovery from anode slime.
Based on a “filter press backwash–chemical precipitation–gaseous membrane absorption” process, treatment of harmless cyanide tailings was conducted using cyanide tailings from a gold smelting enterprises (Yunnan Province, China) as the research object. The effects of air-drying time, backwash water parameters, initial pH of acidification, NaHS dosage, cyanide-containing water flow rate, and gaseous membrane stages on the process were investigated. Chemical composition, X-ray diffraction, and X-ray photoelectron spectroscopy analyses of the copper products were carried out. Results showed that the copper content in the copper product was 54.56%, and the chemical composition was mainly CuSCN, CuS, Cu2S, and CaSO4. Five cycles of experiments were carried out under optimal conditions; the results showed that the process can make the treated cyanide tailings meet the requirements of the technical specification for pollution control of cyanide leaching residue in the gold industry (TSPC) standard for storage in a tailings pond and a have certain stability. The average recovery rate of copper and total cyanide in elution water was 97.8% and 99.89%, respectively, and the average removal rate of thiocyanate was 94.09%.
Attempts have been made to extract nickel from ores and nickel-containing wastes using the chlorination method. However, the use of gaseous chlorinating agents is limited due to their toxicity. High-temperature chlorination of nickel oxide using calcium chloride is analyzed in this study. The volatilization percentage is positively correlated to temperature and CaCl2 dosage and negatively correlated to oxygen partial pressure. The apparent activation energy is calculated to be 142.91 kJ/mol, between 1173 K and 1323 K, which suggests that the high-temperature chlorination of nickel oxide using calcium chloride is controlled by a chemical reaction.