The humanoid robot, one of the ideal unmanned systems, has the potential to perform tasks currently carried out by human workers in industry, manufacturing, service, and disaster response. In such complicated environments with unknown disturbances, compliance is important for a humanoid robot, especially a position-controlled one, to maintain balance while performing a task. This article presents a dynamic torso compliance method for position-controlled humanoid robots to adapt to unknown external disturbances while standing or walking. This method comprises two independent controllers. One controller, which is based on a linear inverted pendulum with a flywheel, is used to realize compliant behavior by controlling the torso postures according to the zero moment point. The other controller, which is based on a double inverted pendulum, is adopted to obtain the dynamic torso movements as well as maintain balance through a quadratic-programming-based controller. With the proposed method, controls for compliance and balance are decoupled, and a position-controlled robot can perform dynamic torso compliance and maintain balance while standing or walking. The performance of the proposed method is validated by simulations and experiments on a position-controlled humanoid robot (BHR-T).

Load capacity is an important index to reflect the practicability of legged robots. Existing research into quadruped robots has not analyzed their load performance in terms of their structural design and control method from a systematic point of view. This paper proposes a structural design method and crawling pattern generator for a planar quadruped robot that can realize high-payload locomotion. First, the functions required to evaluate the leg’s load capacity are established, and quantitative comparative analyses of the candidates are performed to select the leg structure with the best load capacity. We also propose a highly integrated design method for a driver module to improve the robot’s load capacity. Second, in order to realize stable load locomotion, a novel crawling pattern generator based on trunk swaying is proposed which can realize lateral center of mass (CoM) movement by adjusting the leg lengths on both sides to change the CoM projection in the trunk width direction. Finally, loaded crawling simulations and experiments performed with our self-developed quadruped robot show that stable crawling with load ratios exceeding 66% can be realized, thus verifying the effectiveness and superiority of the proposed method.

The bi-articular muscle-tendon complex (MTC) in an animal's leg allows a transfer of mechanical power between adjacent joints and exertion of a large force at the toes. It is capable of storing and releasing elastic energy efficiently during motions. In our previous studies, we proposed mechanisms of the bi-articular MTC for achieving extension of the upper and lower parts of the leg and experimentally demonstrated that each mechanism allows the higher jumping motion of a legged robot. In this study, we developed a bio-inspired legged robot by integrating the upper and lower leg bi-articular MTCs and investigated the effect of their cooperative utilization on the improvement of the vertical jumping ability. A jumping motion trajectory was generated through optimization to maximize the jumping ability based on a dynamic model of the bio-inspired legged robot with these bi-articular MTCs. The simulation results of the models with and without bi-articular MTCs were compared. Finally, through jumping experiments performed by implementing the generated motion trajectory, it was confirmed that the jumping ability was improved by the cooperative utilization of those bi-articular MTCs.

To face the challenge of adapting to complex terrains and environments, we develop a novel wheel-legged robot that can switch motion modes to adapt to different environments. The robot can perform efficient and stable upright balanced locomotion on flat roads and flexible crawling in low and narrow passages. For passing through low and narrow passages, we propose a crawling motion control strategy and methods for transitioning between locomotion modes of wheel-legged robots. In practical applications, the smooth transition between the two motion modes is challenging. By optimizing the gravity work of the body, the optimal trajectory of the center of mass (CoM) for the transition from standing to crawling is obtained. By constructing and solving an optimization problem regarding the posture and motion trajectories of the underactuated model, the robot achieves a smooth transition from crawling to standing. In experiments, the wheel-legged robot successfully transitioned between the crawling mode and the upright balanced moving mode and flexibly passed a low and narrow passage. Consequently, the effectiveness of the control strategies and algorithms proposed in this paper are verified by experiments.

For humanoid robots, online motion generation on non-flat terrain remains an ongoing research challenge. Computational complexity is one of the primary restrictions that preclude motion planners from generating adaptive behaviors online. In this paper, we investigate this problem and decompose it into two sequential components: an Efficient Behavior Generator (EBG) and a Nonlinear Centroidal Model Predictive Controller (NC-MPC). The EBG is responsible for optimizing the physically feasible whole-body template behaviors, which can provide reliable warm-starts for NC-MPC, thereby greatly reducing the computational effort of online planning. With tailored objective function and feet complementary constraints, the EBG can search for a near-optimal solution after several iterations within seconds for different behaviors including walking, running, and jumping, even with intuitive initial guesses. To make the template behaviors extensible when the robot encounters possible different scenarios, the NC-MPC is proposed to regenerate the reactive motion online to adapt it to the real local environment. Finally, we validate the effectiveness of synthesizing EBG and NC-MPC for humanoid locomotion on non-flat terrain in simulation and on the real humanoid robot BHR7P. Note to Practitioners — For current humanoid robots, dynamically traversing non-flat terrain such as stairs, slopes, and gaps in the real world presents a significant challenge. In this paper, we propose an adaptive motion planner for humanoid robots to traverse non-flat terrain, which is properly integrated into the closed loop of online control. Considering computational complexity and motion extensibility, the planner consists of two parts: an efficient behavior generator performed offline and a nonlinear model predictive controller performed online. The behavior generator can efficiently generate template behaviors for the humanoid robot, including various gaits such as walking, running, and jumping. To make these template behaviors adaptable, a nonlinear model predictive controller based on the centroidal dynamics model is developed to plan reactive motions online. It can extend template behaviors to fit potentially different scenarios in practice. The proposed method is validated in simulations and experiments with the humanoid robot BHR7P. Furthermore, this method can be applied to legged robots or systems that need to move dynamically on non-flat terrain, such as quadruped and hexapod robots.

At present, most quadruped robots can move quickly and steadily on both flat and undulating ground; however, natural environments are complex and changeable, so it is important for a quadruped robot to be able to jump over obstacles immediately. Inspired by the jumping movement of quadruped animals, we present aerial body posture adjustment laws and generate animal-like jumping trajectories for a quadruped robot. Then, the bionic reference trajectories are optimized to build a trajectory library of a variety of jumping motions based on the kinematic and dynamic constraints of the quadruped robot. The model predictive control (MPC) method is employed by the quadruped robot to track the optimized trajectory to achieve jumping behavior. The simulations show that the quadruped robot can jump over an obstacle of 40 cm in height. The effectiveness of the animal-like jump control method is verified.