This study aims to assess the potential of wind energy in Medina by using Weibull probability distribution to provide an insight concerning the energy production from the selected wind turbine Aventa AV-7. Scale factors c and shape k of Weibull distribution, were determined for wind speed frequency. Significant findings included a wind speed recurrence of 2.9 m/s with a probability of 30% approximately. The average c and k were found to be 3.467 and 2.923 m/s, respectively. The estimated average k is relatively high, which indicates that the spread in wind speeds is small. Aventa AV-7 turbine was chosen to test the power generation of wind in Medina. It was found that this wind turbine can generate 8648 kWh/year in the Medina region, which is only 15.2% of the maximum power production. This turbine is expected to generate the maximum possible power output at a wind speed of 7 m/s.
The flow of nanofluids is very important in industrial refrigeration systems. The operation of nuclear reactors and the cooling of the entire installation to improve safety and economics are entirely dependent on the application of nanofluids in water. Therefore, a model of Maxwell’s dusty nanofluid with temperature-dependent viscosity, surface suction and variable surface tension under the action of solar radiation is established. The basic equations of momentum and temperature of the dust and liquid phases are solved numerically using the MATLAB bvp4c scheme. In the current evaluation, taking into account variable surface tension and varying viscosity, the effect of dust particles is studied by immersing dust particles in a nanofluid. Qualitative and quantitative discussions are provided to focus on the effect of physical parameters on mass and heat transfer. The propagation results show that this mixing effect can significantly increase the thermal conductivity of nanofluids. With small changes in the surface tension parameters, a stronger drop in the temperature distribution is observed. The suction can significantly reduce the temperature distribution of the liquid and dust phases. The stretchability of the sheet is more conducive to temperature rise. The tables are used to explain how physical parameters affect the Nusselt number and mass transfer. The increased interaction of the liquid with nanoparticles or dust particles is intended to improve the Nusselt number. This model contains features that have not been previously studied, which stimulates demand for this model among all walks of life now and in the future.
17 November 2021 in Arabian Journal for Science and Engineering
This investigation is conducted to examine potential opportunities of energy savings in the meat processing industry. It demonstrates that energy saving can be considered as a major factor to increase profit and competition within this sector. Detailed energy audits were carried out for meat processing equipment in the national factory. This work shows that there are large opportunities of savings which can be achieved by installing the economiser; using compressed air leakage points in the distribution air network, increasing the suction temperature of the high stage compressors as well as recovering of heat in blow down by preheating feed water which will save even more energy. It was found that the refrigeration systems consume more electricity compared to other departments. However, modification of the water pumping system will save an extra amount of energy. Finally, valuable recommendations to factory management are proposed and required additional research, analysis, and data collection are identified.
1 December 2021 in Case Studies in Thermal Engineering