A method for measuring planar temperature fields of fluid flows is proposed. The focusing schlieren technique together with a calibration procedure to fulfill such a purpose is used. The focusing schlieren technique uses an off-axis circular illumination to reduce the depth of focus of the optical system. The calibration procedure is based on the relation of the intensity level of each pixel of a focused schlieren image to the corresponding cutoff grid position measured at the exit focal plane of the schlieren lens. The method is applied to measure planar temperature fields of the hot air issuing from a 10 mm diameter nozzle of a commercial Hot Air Gun Soldering Station Welding. Our tests are carried out at different temperature values and different planes along the radial position of the nozzle of the hot air. The experimental values of temperature measurements are in agree with those measured using a thermocouple.

Visualizing two variables in the fluid flow requires a complex optical system to fulfill such a purpose. Furthermore, in these applications, measuring the temperature fields of the fluid is sometimes necessary. In this work, we use a color digital camera to record in one snapshot shadowgraph and two direction sensitivity Schlieren images. Furthermore, the Schlieren images obtained are used to measure temperature fields. The optical system, as main components, employs an rgb Light Emitting Diode (LED), two knife edges represented by shortpass and longpass ultra-thin filters, and a color digital camera. The results of this study show that shadowgraph images are contaminated with the crosstalk effect, and correction against it was applied. On the other hand, the reached resolution of the optical system to measure temperature values is approximately one degree.

A strong contrast in the third-order nonlinear optical effects exhibited by hierarchical nanostructures explored in a bidirectional optical circuit is reported. The samples were integrated by multiwall carbon nanotubes and platinum-decorated carbon nanotubes synthetized by an aerosol pyrolysis technique and followed by a chemical vapor deposition method. Coupled and decoupled third-order nonlinear optical properties of the nanocomposites were studied. A nanosecond two-wave mixing experiment at 532 nm wavelength was conducted to analyze the optical Kerr effect in the samples. Multi-photonic interactions were evaluated by a single-beam transmittance as a function of input irradiance and volume fraction of the nanoparticles integrated in the nanohybrids. A two-photon absorption process was identified as the main physical mechanism responsible for the anisotropy in the observed optical nonlinearities. Random carbon nanotube networks in film form were put on top of platinum-decorated carbon nanotubes in order to build up a bilayer sample featuring optical selectivity. The switching of optical signals in propagation through the samples was obtained by an orientation-selectable optical transmittance. Unidirectional optically controlled laser pulses dependent on irradiance and polarization in a two-wave mixing was proposed with potential nanophotonic and nanoelectronic applications. The design of signal processing functions driven by nanohybrid platforms can be contemplated.

In this work, we propose a method to measure planar temperature fields of fluids flow. We used a focusing schlieren technique together with a calibration procedure to fulfill such purpose. The focusing schlieren technique uses an off-axis circular illumination to reduce the depth of focus of the optical system. The calibration procedure is based on the relation of the intensity level of each pixel of a focused schlieren image to the corresponding cutoff grid position measured at the exit focal plane of the schlieren lens. The method is applied to measure planar temperature fields of the hot air issuing from a 10 mm diameter nozzle of a commercial Hot Air Gun Soldering Station Welding. Our tests are carried out at different temperature values and different planes along the radial position of the nozzle of the Hot Air Gun Soldering Station Welding. The temperature values obtained experimentally are in agreed with those obtained with a thermocouple.