Purpose: The purpose of this in vitro study was to investigate the effect of four solutions sterile water (control group), tea, coffee, cola on the color stability of different denture base materials (short cycle heat-polymerized PMMA, long cycle heat-polymerized PMMA, thermo plastic monomer free microcrystalline polymer and 3d printed PEEK).Material and methods: A total number of 160 specimens (forty specimens for each group) were constructed, specimens then were divided into four groups each group includes 10 from each denture base material (short cycle heat-polymerized PMMA, long cycle heat-polymerized PMMA, thermo plastic monomer free microcrystalline polymer, 3d printed PEEK denture base material) were stored in each solution in room temperature in a dark environment. Colorimetric measurements were done before immersion and 6 weeks after immersion. Color differences among specimens immersed in water (control group), and staining solutions were evaluated over time. Data were statistically analyzed, with one-way analysis of variance (ANOVA) (α = 0.05). ANOVA was followed by Duncan`s post hoc test to find which groups differed from each other.Results: Result showed significant difference between groups before and after immersion in different beverages except for Cola solution in the PEEK at P-value 0.05, control group had no change in color before and after immersion in sterile water. Tea and cola showed the highest change in color with thermo plastic monomer free microcrystalline polymer.
Purpose: aim of the study was to compare the bond strength of nanohybrid composite artificial teeth (NHC) and two types of denture base material ( acrylic denture base material and thermoplastic monomer free semi-rigid micro crystalline polymer denture base material (Karadent) . Material and Methods : nanohybrid composite teeth (premolars) was sliced equally , grooved for increasing contact surface and attached to 16 discs of denture base material (8 for each group), then the discs where grouped into two groups . The samples were subjected to tensile forces till failure by using the Instron Universal testing machine. Results : bonded nanohybrid composite teeth (NHC) to conventional acrylic denture base disc specimens showed better results in comparison to thermoplastic monomer free semi-rigid micro crystalline polymer denture base materials ones. Conclusion : it is recommended to use NHC teeth more often with conventional acrylic denture bases than thermoplastic monomer free semi-rigid micro crystalline polymer denture base materials.
Statement of problem: Polymethyl-methacrylate is still a widely used material for complete and partial denture fabrication. Candida biofilm adherence to PMMA denture base has been studied, and ways to control its adherence by using different ways of cleaning, natural and chemical herbal cleanser-based methods have been introduced as an alternative to chemical methods. Using any type of cleanser may affect the flexure strength of denture bases. Purpose: This study aimed to compare the effect of herbal extract cleanser and chemical cleanser on the flexure strength of three different denture base materials: heat polymerized acrylic resin, thermoplastic polyamide (Nylon), and thermoplastic monomer-free microcrystalline polymer (Karadent). Materials and methods: A total of 90 samples were divided into three equal groups (Heat cured processed acrylic resin, Karadent, Nylon) Samples were immersed in the cleansing solution and distilled water as a control group for 15 days. Results: Flexure strength was measured using a universal testing machine, and the results were collected, tabulated, and statistically analyzed using ANOVA. There was a significant difference between thyme-immersed specimens and specimens immersed in sodium hypochlorite (NaoCl). The Karadent specimens showed the least flexure strength measures among the three groups. Conclusion: immersing in different cleanser affected the flexure strength of denture base materials, using thyme as a cleanser has less effect on denture base flexure strength in comparison to NaoCl.
Purpose : this study aimed to evaluate the retention of single implant mandibular overdenture using different single crown coping materials., Materials and methods : clear acrylic resin mandiblur cast was fabricated with single implant located in the mid-line of the cast , cast with the implant was scanned for designing of nine copings of different materilas using computer aided design computer aided manufacture CAD/CAM , According to material used for copings fabrication, models were categorized as follow: Polyetheretherketone (PEEK) group, Zirconim dioxide (ZrO2) group , Hybrid composite resin coping group . Nine identical mandibular complete overdentures were constructed, tensile force for removing overdenture with copings is then recorded Results : Comparison of recorded tensile strength results showed a significant difference between groups where the highest retention were recorded with Zirconia group, followed by PEEK and the lowest retention results were noted with Hybrid composite resin Conculsion: Within the limitation of this in vitro study, it could be concluded that single crown that fabricated from ZrO2 for supporting implant supported overdenture had the better retention results in comparison to Peek an hybrid composite ones.
Background: complete denture is the most commonly used treatment plane for edentulous patients, many denture wearers complain from denture retention. Various materials have been used as a denture base to improve denture retention and denture base flexural strength. Nanoparticles was discovered that its inclusion as a reinforcing agent influences the physical properties of acrylic resins. Aim of the study: this comparative in-vitro study was carried out to compare the retention of maxillary denture using three different denture bas material. Material and methods: total number of 18 denture base was fabricated (six conventional base, six nylon denture base and six modified PMMA denture base), retention of the maxillary dentures was measured before and after thermocycling, 30 rectangular specimens were fabricated from each material for flexural strength test. Data ware calculated, tabulated and statically analyzed. Results: significant differences appeared between both polyamide and modified PMMA in comparison to conventional PMMA in both retention and flexural strength .conclusion: modification of PMMA with nano zirconia nano filler improved both fracture resistance and retention of denture bases.