Mohd Ibnu Haikal Ahmad Sohaimy

Mr. Mohd Ibnu Haikal Ahmad Sohaimy

Energy Storage Research Group

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

26 October 2020 in Polymers
Verified
Journal Article
Open access
PDF file
MSMohd Ibnu Haikal Ahmad Sohaimy
Mohd Ibnu Haikal Ahmad Sohaimy
MIMohd Ikmar Nizam Mohamad Isa
Mohd Ikmar Nizam Mohamad Isa
Green and safer materials in energy storage technology are important right now due to increased consumption. In this study, a biopolymer electrolyte inspired from natural materials was developed by using carboxymethyl cellulose (CMC) as the core material and doped with varied ammonium carbonate (AC) composition. X-ray diffraction (XRD) shows the prepared CMC-AC electrolyte films exhibited low crystallinity content, Xc (~30%) for sample AC7. A specific wavenumber range between 900–1200 cm−1 and 1500–1800 cm−1 was emphasized in Fourier transform infrared (FTIR) testing, as this is the most probable interaction to occur. The highest ionic conductivity, σ of the electrolyte system achieved was 7.71 × 10−6 Scm−1 and appeared greatly dependent on ionic mobility, µ and diffusion coefficient, D. The number of mobile ions, η, increased up to the highest conducting sample (AC7) but it became less prominent at higher AC composition. The transference measurement, tion showed that the electrolyte system was predominantly ionic with sample AC7 having the highest value (tion = 0.98). Further assessment also proved that the H+ ion was the main conducting species in the CMC-AC electrolyte system, which presumably was due to protonation of ammonium salt onto the complexes site and contributed to the overall ionic conductivity enhancement.

26 July 2022 in Polymers
Verified
Journal Article
Open access
PDF file
MSMohd Ibnu Haikal Ahmad Sohaimy
Mohd Ibnu Haikal Ahmad Sohaimy
MIMohd Ikmar Nizam Mohamad Isa
Mohd Ikmar Nizam Mohamad Isa
In this work, CMC-AFT biopolymer electrolytes system was developed using Carboxymethyl cellulose (CMC) doped with varied amount (10–50 wt.%) of ammonium formate (AFT) in order to study the effect of AFT on the biopolymer-salt system. The chemical structure of the biopolymer was studied using Fourier-Transform infrared (FTIR) and X-ray diffraction (XRD). The interaction between the COO− of CMC and the weakly-bound H+ of NH4+ AFT occurred at 1573 cm−1 as seen in FTIR analysis and the amorphous phase was found to increase with the addition of AFT as seen from XRD pattern. Both FTIR and XRD testing indicates that the AFT had disrupted the CMC crystalline structure. The ionic conductivity of the CMC-AFT biopolymer electrolytes increases and achieved the highest value of 1.47 × 10−4 S·cm−1 with the addition of AFT. The impedance measurement showed that the capacitive and resistive behavior inside the biopolymer diminished when 50 wt.% of AFT was added. Dielectric analysis confirmed the increased number of charge carriers is due to the increase in AFT composition. Further dielectric analysis showed the occurrence of conductivity relaxation peak thus affirmed the charge carriers’ ability to travel further to a longer distances when AFT composition increases from 10 to 50 wt.%. The dielectric properties confirmed the non-Debye behavior of the CMC-AFT biopolymer electrolytes.

10 October 2024 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Verified
Journal Article
Open access
PDF file
MSMohd Ibnu Haikal Ahmad Sohaimy
Mohd Ibnu Haikal Ahmad Sohaimy
MMMuthuvinayagam Muthiah
Muthuvinayagam Muthiah
MIMohd Ikmar Nizam Mohamad Isa
Mohd Ikmar Nizam Mohamad Isa
Safety concerns about conventional batteries such as prone to leakage, fire and expensive core materials can be overcome by using a solid biopolymer electrolyte (SBE) in the battery system. This work aims to improve the ionic conductivity of the biopolymer electrolyte based on carboxymethyl cellulose (CMC) by doping with varied ammonium formate (AFT) composition (5 – 50 wt.%). The biopolymer electrolyte was tested for its electrical properties, using electrical impedance spectroscopy (EIS) to determine the optimum salt concentration with the highest ionic conductivity. The sample which has the highest ionic conductivity is the sample added with 50 wt.% of ammonium formate which obtained at ~1.47 × 10-4 S/cm. Surprisingly, this SBE system shows percolation conductivity behaviour. Within 303K– 373K temperature range, the SBE follow Arrhenius behaviour. The charge carrier’s transport properties improved with AFT composition where the dielectric value and relaxation peak position increases with AFT. The maximum ionic conductivity achieved, and the temperature stability shows a promising prospect of current work for energy storage application, albeit further improvement is still needed.

10 January 2025 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Verified
Journal Article
Open access
PDF file
NBNur Maisarah Batrisyia Mohd Bahaudin
Nur Maisarah Batrisyia Mohd Bahaudin
MSMohd Ibnu Haikal Ahmad Sohaimy
Mohd Ibnu Haikal Ahmad Sohaimy
SSSyahida Suhaimi
Syahida Suhaimi
WKWan M. Khairul
Wan M. Khairul
UOUwaisulqarni Osman
Uwaisulqarni Osman
MIMohd Ikmar Nizam Mohamad Isa
Mohd Ikmar Nizam Mohamad Isa
Novel solid biopolymer electrolytes (SBE) with various amounts of ammonium formate (AF) salt doped into 2-hydroxyethyl cellulose (2-HEC) are fabricated by using a well-known technique, solution casting. The SBEs are developed mainly to address the leakage, toxic material issues, safety concerns, and costs associated with conventional liquid-based electrolytes. The 2-HEC-based SBE is analyzed for its ionic conductivity and electrical properties. The highest ionic conductivity achieved was 2.40 × 10-3 S/cm for AF40 (40 wt.% AF salt). The bulk resistance value obtained at ambient and elevated temperatures emphasizes its effect on ionic conductivity and electrical behavior regarding its dielectric permittivity. The activation energy from the temperature-dependent ionic conductivity indicates that activation energy decreases with increasing temperature. The two primary transport parameters affecting the system's ionic conductivity based on the Rice and Roth model are the diffusion coefficient (D) and ion mobility (µ). This study showed that the rise in ionic conductivity depends on the concentration of ammonium formate salt.

10 January 2025 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Verified
Journal Article
Open access
PDF file
NMNurul Faeqah Mazalan
Nurul Faeqah Mazalan
MSMohd Ibnu Haikal Ahmad Sohaimy
Mohd Ibnu Haikal Ahmad Sohaimy
AKAzwani Sofia Ahmad Khiar
Azwani Sofia Ahmad Khiar
WKWan M. Khairul
Wan M. Khairul
UOUwaisulqarni Osman
Uwaisulqarni Osman
MIMohd Ikmar Nizam Mohamad Isa
Mohd Ikmar Nizam Mohamad Isa
In this study, solid biopolymer electrolytes (SBEs) were developed as an alternative to liquid electrolytes for battery applications. 2-hydroxyethyl cellulose (2HEC) served as the polymer host in the preparation of SBE films, incorporating varying amounts of ammonium bromide (NH4Br). The films were then analysed using electrical impedance spectroscopy (EIS) to investigate its electrical properties. The system containing 20 wt.% of NH4Br achieved the highest conductivity at 3.9510-5 Scm-1 at ambient temperature of 303 K. The 2HEC-NH4Br SBE film system was subjected to temperature variations between 303 K – 373 K in increments of 10 °C, revealing an increase in conductivity with rising temperature. This observation suggests that the SBE system adheres to the Arrhenius law, enabling the determination of the activation energy (Ea) through temperature dependence plotting. The Ea for the most conductive system reflects the lowest energy, indicating minimal energy required for the excitation process within the polymer chain. This Ea value offers a deeper insight into the transport parameters, including the number of mobile ions, ions mobility and diffusion coefficient, as determined through the Rice and Roth method.