The paper presents an analysis of the impact of oxide layers, manufactured by means of laser radiation (with varying energy densities), on the resistance of AISI 304 stainless steel to corrosion. Corrosion resistance tests have been carried out in a weakly acidic environment (H2SO4, pH = 3.5) and a neutral environment (NaCl, pH = 7). The experiment was performed with the use of a laser system equipped with the Ytterbium Yb3+ fiber laser with a pulse duration of 230 ns. It has been shown that the thermal-oriented laser process significantly affects the course and nature of cathode-anode processes occurring on the surface of irradiated materials. Compared to the unstructured reference samples, there has been a significant increase in corrosion resistance of AISI 304 steel in the range of laser fluence between 50 and 70 J/cm2. The Energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy analyses of the chemical composition of the surface of the samples as well as the change of their morphology (microcracks of oxide layers) are closely correlated with the electrochemical measurements. Corrosion intensity has also been specified as a function of the energy density used for the laser marking of the samples.
1 November 2014 in Polymer Degradation and Stability
In precision agriculture, the estimation of soil parameters via sensors and the creation of nutrient maps are a prerequisite for farmers to take targeted measures such as spatially resolved fertilization. In this work, 68 soil samples uniformly distributed over a field near Bonn are investigated using laser-induced breakdown spectroscopy (LIBS). These investigations include the determination of the total contents of macro- and micronutrients as well as further soil parameters such as soil pH, soil organic matter (SOM) content, and soil texture. The applied LIBS instruments are a handheld and a platform spectrometer, which potentially allows for the single-point measurement and scanning of whole fields, respectively. Their results are compared with a high-resolution lab spectrometer. The prediction of soil parameters was based on multivariate methods. Different feature selection methods and regression methods like PLS, PCR, SVM, Lasso, and Gaussian processes were tested and compared. While good predictions were obtained for Ca, Mg, P, Mn, Cu, and silt content, excellent predictions were obtained for K, Fe, and clay content. The comparison of the three different spectrometers showed that although the lab spectrometer gives the best results, measurements with both field spectrometers also yield good results. This allows for a method transfer to the in-field measurements.
1 January 2017 in Mathematical Problems in Engineering
Laser‐induced color marking of metals, due to numerous advantages, including inter alia the high quality, resolution, durability, and noncontact methodology of surface marking, seems to be attractive for use in various applications. In this method, the resulting color is mainly evident from the interference effect. Therefore, one of the still unsolved problems on titanium is the color change after imposition of an additional layer (fingerprints, grease, etc.). In this paper, a computer simulation based on the theoretical thin layers model was presented. The results of the modeling study revealed that theoretically a thin protective coating of a known refractive index can be applied while still maintaining the target color. In this case, as a protective layer, an amphiphobic coating has been taken into consideration with its ability to resist surface contamination. The study was performed for titanium (grade 2). The model utilizes the real data derived from the spectrophotometer, as well as from the ellipsometry measurements of laser‐induced samples.
1 December 2016 in Spectrochimica Acta Part B: Atomic Spectroscopy