Masahide Takeda

Dr. Masahide Takeda

Research and Development Center, Toa Corporation

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
Sooyoul KimSooyoul Kim
Sooyoul Kim
HMHajime Mase
Hajime Mase
NTNguyen Ba Thuy
Nguyen Ba Thuy
MTMasahide Takeda
Masahide Takeda
CTCao Truong Tran
Cao Truong Tran
VDVu Hai Dang
Vu Hai Dang
The current study developed storm surge hindcast/forecast models with lead times of 5, 12, and 24 h at the Sakaiminato port, Tottori, Japan, using the group method of data handling (GMDH) algorithm. For training, local meteorological and hydrodynamic data observed in Sakaiminato during Typhoons Maemi (2003), Songda (2004), and Megi (2004) were collected at six stations. In the forecast experiments, the two typhoons, Maemi and Megi, as well as the typhoon Songda, were used for training and testing, respectively. It was found that the essential input parameters varied with the lead time of the forecasts, and many types of input parameters relevant to training were necessary for near–far forecasting time-series of storm surge levels. In addition, it was seen that the inclusion of the storm surge level at the input layer was critical to the accuracy of the forecast model.

Verified
Journal Article
Open access
PDF file
TNTomoaki Nakamura
Tomoaki Nakamura
NNNaoto Nagayama
Naoto Nagayama
YCYonghwan Cho
Yonghwan Cho
NMNorimi Mizutani
Norimi Mizutani
YKYoshinosuke Kurahara
Yoshinosuke Kurahara
MTMasahide Takeda
Masahide Takeda
Floating caissons may oscillate primarily due to ocean waves during towing operations. Reducing the oscillation based on the extension part (footing) of the bottom slab of the caissons can efficiently increase the safety of towing maneuvers. However, the influence of the footing length on the motion of floating caissons has not been adequately studied. This study investigates this topic through hydraulic model experiments and numerical simulations. Experimental results for regular waves show that the rotational motion (pitch) of the caisson around the wave crest direction increases owing to resonance. This suggests that the pitch could be reduced by designing caissons, such that resonance may be prevented along the footing length. In the numerical simulations of irregular waves, the Fourier amplitudes of the heave and pitch show that the footings amplify their low-frequency components and reduce their high-frequency components. Furthermore, the significant total amplitudes of the heave and pitch show a different trend from that of the regular waves observed in the hydraulic model experiments. This suggests that it is essential to examine the motion of a caisson under irregular waves when assessing the effect of footings in an actual marine environment.

Verified
Journal Article
Open access
PDF file
YYYoshimichi Yamamoto
Yoshimichi Yamamoto
YKYuji Kozono
Yuji Kozono
EMEric MAS
Eric MAS
FMFumiya Murase
Fumiya Murase
YNYoichi Nishioka
Yoichi Nishioka
MTMasahide Takeda
Masahide Takeda
The aftermath of the Indian Ocean tsunami on 26 December 2004 triggered by the off Sumatra earthquake (magnitude “M” = 9.1), and the Great East Japan earthquake of 11 March 2011 off the Pacific coast of Tohoku (M = 9.0), evidence the secondary damage from driftage collision due to large tsunami waves. To prevent this type of damage, the establishment of methods for predicting driftage movement and calculating the impact force by driftage is necessary. Several numerical models have been developed to predict the driftage movement of objects. Every year, these improve in accuracy and usability. In contrast, there are many calculation formulae for calculating the impact force. However, since there are considerable differences between values calculated using these formulae, the reliability of each formula is unknown. Therefore, in this research, one team of the committee on tsunami research of the Japan Society of Civil Engineers summarizes the main calculation formulae of impact forces that have been proposed until 2019. In addition, for each type of driftage (driftwood, containers, cars, ships), we compare calculation values of these formulae with measured data of large-scale experiments. Finally, we check the range of calculation values for each formula up to 15 m/s in collision velocity and clarify then the following facts: (1) In the case of driftwood, the formulae of Matsutomi, Federal Emergency Management Agency (FEMA) and National Oceanic and Atmospheric Administration (NOAA), and American Society of Civil Engineers (ASCE) are most reliable; (2) In the case of containers, the formulae of Matsutomi, Arikawa et al., FEMA and NOAA, Ikeno et al., and ASCE are most reliable; (3) In the case of cars, the formulae of FEMA and NOAA, and ASCE are most reliable; (4) In the case of ships, the formulae of Mizutani, FEMA and NOAA, and ASCE are most reliable.

Verified
Journal Article
Open access
PDF file
KSKaito Shirai
Kaito Shirai
TNTomoaki Nakamura
Tomoaki Nakamura
YCYonghwan Cho
Yonghwan Cho
NMNorimi Mizutani
Norimi Mizutani
YKYoshinosuke Kurahara
Yoshinosuke Kurahara
MTMasahide Takeda
Masahide Takeda
Floating caissons can oscillate owing to ocean waves when towed to an installation site. To reduce these oscillations, free-surface anti-oscillation tanks mounted on floating caissons have been proposed. However, no coupled numerical model exists between the motion of the floating caisson and fluid flow in the tanks based on computational fluid dynamics (CFD). In this study, a coupled model is developed and compared to existing physical experiments for validation. In the coupled model, the vertical and rotational motion of the floating caisson are computed as a rigid body, and the motion of the free water in the tank is computed using a CFD model. Numerical results show the predictive capability of the coupled model in terms of the rotational motion (pitch) of the floating caisson within ±20% of experimental data, regardless of the absence or presence of water in the tank. The numerical results also show that the fluid flow with complex air–water interface motion in the tank can be analyzed in detail using the coupled model. This suggests that the coupled model developed in this study is a useful tool for quantitatively assessing the effectiveness of an anti-oscillation tank for reducing the pitch of a floating caisson.

1 January 2017 in Journal of Japan Society of Civil Engineers, Ser. B2 (Coastal Engineering)
Verified
Journal Article
Closed access
YYYuki Yasuhira
Yuki Yasuhira
TSTakaaki Shigematsu
Takaaki Shigematsu
MTMasahide Takeda
Masahide Takeda

1 January 2023 in Japanese Journal of JSCE
Verified
Journal Article
Open access
PDF file
TTTracey H. A. Tom
Tracey H. A. Tom
HMHajime Mase
Hajime Mase
MTMasahide Takeda
Masahide Takeda
CHChisato Hara
Chisato Hara
Sooyoul KimSooyoul Kim
Sooyoul Kim
KOKohei Oguma
Kohei Oguma
本研究では,混成堤断面形状パラメータを用いて,無次元平均波力強度の予測,および衝撃砕波波力の発生が判定可能な機械学習モデルを提案する.ただし,学習用の実験データは多くないため(スモールデータ),データの重複を認めてサンプリングする復元抽出法によるアンサンブル学習を試みた.ベースとなる機械学習モデルはANNとXGBoostの2種類を用いた.無次元平均波力強度の算定結果と実験結果を比較すると,相関係数とRMSEは,ANNでは0.96, 0.15,XGBoostでは0.96, 0.14となり,ほぼ同程度であった.無次元平均波力強度が2を超えたときに衝撃砕波力が発生すると判定したときの的中率は,ANNモデルで99%,XGBoostで97%であった.