In this study some mechanical properties of PVC-Wood fibre composite were investigated. The wood fibre was gotten from a mahogany tree. The sample was moulded and shaped at a temperature of 150oC using a hadraulic hot press and pressure of 3bar for 5mins and the mechanical properties were studied base on varying the wood fibre contents from 0% to 50%. The hardness test carried out using the durometer hardness tester show a decrease in the hardness of the composite as the wood fibre is varied from 0%, 10%, 20%, 30% 40% and 50% and the impact strength of the composite decreases as well in that order. The tensile strength conducted using the Mensato Tensometer show a decrease at 10% wood fibre, while an increase in the wood fibre to 20% show an increase in the tensile strength on further addition of the wood fibre a decrease is noticed. This decrease in tensile strength decreases the strain of the PVC-wood fibre composite and hence increasing the modulus of elasticity of the PVC-wood fibre composite as the wood fibre is been added.
The manuscripts entails the use of plant gum blends prepared with gum Arabic and strawberry gum, to inhibit the corrosion of aluminum immersed in concentrated sulfuric acid solution. The miscibility tests of the blended gums (Arabic and strawberry) were carried out using Ostwald viscometer. Following the ratio of gum Arabic to strawberry gum, the ratio 0.2:0.8 has the highest relative viscosity and thus more viscous than all the other blends prepared in this work, and due to its viscosity strength the 0.2:0.8 ratio was used. In addition, the inhibitive and adsorption properties of Arabic and strawberry gums were studied using gravimetric method. The results obtained indicated that the blend of Arabic and strawberry gums are effective in the corrosion inhibition of aluminum in H2SO4 solutions. The adsorption of the inhibitor on the aluminium surface is spontaneous and supports the Langmuir adsorption model, the data was also subjected to other isotherms and thermodynamic models.
The work entails the viscometric study of a common plant gum found in Nigeria (Acacia Senegal) blended with polyacrylamide (PAM). The gum was purified after collected and mixed in specific ratios of 10:90, 30:70, 50:50, 70:30 and 90:10 with PAM, before they were subjected to rheological study. The intrinsic, relative and specific viscosity for the bends were determined and presented in the research work. The plots of the relative viscosity against concentration of the gums at different temperature vary significantly at higher concentration, while the viscosity for gum Arabic/PAM (90:10) showed the most distinct variation between different temperatures. The result was found to be agreement with some other similar research in the literature. PAM was found to be more viscose than gum Arabic at both temperatures, while the viscosity index such as intrinsic, specific and relative viscosity for the synergistic combination between the polymers were found to decrease as we increased the composition of gum Arabic within the blend.
The concentrations of heavy metals namely; chromium, cadmium, lead and nickel (Cr, Cd, Pb and Ni) were determined from twelve samples of rice(ORYZA SATIVA) , the samples comprises of six foreign samples and six local samples collected from different markets within Funtua Local Government Area in 2019. The samples were digested in aqua region and the level of heavy metals were determined using Atomic Absorption Spectrophotometer AA500FS Model. Concentrations of the heavy metals in the rice samples were in the order Cr > Pb > Ni > Cd. The highest concentration of cadmium was detected in LR1(0.620mg/kg) and LR5(0.626mg/kg) while the lowest was detected in FR5(0.058mg/kg). The lowest concentration of nickel was detected in in FR6(0.060mg/kg) and LR2(0.090mg/kg) while the highest was detected in LR3(0.910mg/kg) and LR4(0.750mg/kg). The highest concentration of lead was detected in FR6(0.650mg/kg) and LR1(0.580mg/kg) while the lowest was detected in LR2(0.199mg/kg) and LR5(0.212mg/kg). The highest concentration of chromium was detected in LR1(0.840mg/kg), LR4(0.840mg/kg) and FR5(0.760mg/kg) while the lowest was detected in LR6(0.050mg/kg) and FR2(0.080mg/kg). The analysis shows that chromium, nickel, and lead concentrations that accumulated almost all the rice samples exceeded the maximum permissible limits prescribed by the World Health Organization guideline as well as the Food And Agricultural Organization standard. Cadmium concentrations were found in almost all the samples to conform with the standards. The higher levels of heavy metals accumulated by the samples may be attributed to the increase in agricultural activities such as the application of phosphate fertilizer, sewage sludge disposal and other anthropogenic activities which deserve further investigations.