Sinkholes forming as a result of loss of stability of shallow voids of natural or anthropogenic origin (mining activity) pose a serious hazard to buildings and infrastructure and especially to the inhabitants of the area. The paper presents an example of the verification of the author’s mathematical model of forecasting the formation of sinkholes. The verification was performed with the use of a computer program for a case that was strictly compliant to the model assumptions. The sinkhole has formed above a working located at the depth of 54 m, outside the area of bifurcations or crossings with another gallery. The working was not influenced by mining exploitation, which means that the analysed case fully met the assumptions of the adopted mathematical model. The calculations of the sinkhole dimensions were also carried out, providing results that correspond to the actual conditions. The calculations and the performed analysis have confirmed the usability of the proposed model.
Currently, linear discontinuous deformations in mining areas are an important issue, both due to the frequency of their occurrence and the threat they pose to general safety. This paper presents a case study of an occurrence of such a deformation. The analyses of the geological and mining conditions, as well as the conducted calculations presented herein, indicate that the cause of the deformation was the occurrence of high-value horizontal tensile strains. It was triggered by mining exploitation carried out with caving in three seams at depths between 200 and 545 m. An additional factor conductive to the creation of the deformation was the tectonic structure of the rock mass. The subject matter of the paper is significant given the growing number of discontinuous linear deformations occurring on the surface due to underground mining—even if the mining was conducted at great depths. They were formed as a result of intensive underground mining operations and the occurrence of high-value deformations. These deformations were particularly dangerous to building structures on the surface, which were often damaged. For this reason, it was worthwhile to make arrangements regarding the correlation between the occurrence of the deformations and the values and the distribution of continuous deformations caused by underground extraction, as well as the existence of tectonic faults.
The formation of sinkholes, especially in developed areas, constitutes a considerable hazard to the public safety. Due to the above, the subject of the paper is a significant and current issue. The paper includes a case study of sinkholes forming over shallow mine galleries. Calculations of the workings’ stability and the impact of the underground mining exploitation have been conducted. The probability of sinkhole formation has been determined as well. The time of sinkholes formation did not correspond with the time in which the mining exploitation affected the gallery workings and the moment in time for which the rock mass deformations caused by the exploitation were at the highest level. The performed exploitation caused occurrence of cracks in the rock mass over the working. This allowed the transportation of the loose overburden by rainwater to workings and as a result sinkholes were created—suffosion occurred. The Quaternary overburden built of sands and sandy loams was probably washed out by rainwater, which led to the formation of sinkholes. In all locations, where shallow voids exist at a depth up to 100 m and the overburden consists of loose rocks, one should consider the probability of sinkholes formation.
An intense mining exploitation has been conducted below a highly urbanised area of Upper Silesian Coal Basin for over 100 years. Its influence on the surface and buildings located in the area constituted a subject of many studies, the result of which helped in creating methods allowing to predict deformations and assessing the extent of their impact on buildings. However, there is a number of issues linked with assessment of mining influence on terrain surface deformation, reliable analyses should be carried out individually in respect to particular mining and geological conditions. All calculation results concerning deformations of the mining area, as well as rock mass tremors’ occurrence, can be verified based on measurements results. This paper presents an analysis of exploitation’s impact on a selected structure. Conclusions about the manner of performing the assessment of exploitation’s impact on buildings were based on obtained results.
Numerous abandoned workings, mostly tunnel ones, are present in post shallow mining areas. The loss of stability of an excavation and its failure is often a cause of sinkhole formation at the surface, sometimes even many years after mining activities were discontinued. This paper presents a method of predicting the probability of sinkhole formation based on Salustowicz’s theory as well as its practical application using a computer program.