GNSS/INS integration is widely used for train positioning, but railways tunnels and mountains can interfere GNSS signals and will lead to performance degradation when the system is operated in the standalone INS mode. This paper proposes a Long Short Term Memory (LSTM)-assisted GNSS/INS integration system using recomputed Inertial Measurement Unit (IMU) error, to suppress the error divergence of an INS in the case of GNSS solution non-availability. The IMU error recomputation method is firstly proposed, where the GNSS/INS-derived position, velocity and attitude (PVA) information is utilized when is GNSS available. The train's attitude computed using the GNSS dual-antenna moving baseline method is used as the heading constraint for GNSS/INS integration so as to provide accurate attitude information. The recomputed IMU sensor error is then used for model training, and the system switches to LSTM-assisted INS mode when GNSS solutions are unavailable. The system predicts the IMU sensor error using the train motion state, and corrects the IMU measurements to suppress the accumulating IMU sensor error.The proposed system was evaluated through a train experiment on the Shuozhou-Huanghua railway. The IMU error Recomputation Method (IMU-RM) was evaluated on four time slots of varying lengths, and the proposed LSTM-assisted GNSS/INS integration system using IMU-RM was evaluated in two “difficult” GNSS signal areas, of curved and straight railtrack segments, were simulated. Results showed significant improvement in horizontal position accuracy compared to conventional methods, with suppression of INS sensor error divergence by 79% and 63% for curved and straight segments, respectively.
9 May 2025 in IEEE Transactions on Intelligent Transportation Systems
The integrated Global Navigation Satellite System (GNSS)/Inertial Navigation System (INS) system has been widely used in vehicular positioning and navigation. However, the complex unstructured environments would lead to positioning degradation due to the GNSS outage. This paper proposed a Convolutional Neural Network-Long Short Term Memory (CNN-LSTM) assisted 21-dimensional GNSS/INS integrated navigation system using a Recomputed Method based on the Bias and Scale factor (BS-RM) error of the Inertial Measurement Unit (IMU). When GNSS is available, the obtained accurate GNSS/INS integrated navigation information is used as the input of the proposed BS-RM model to calculate the precise theoretical bias and scale factor error, which are trained as the target values of CNN-LSTM. When GNSS is unavailable, the trained CNN-LSTM is utilized to predict the accurate bias and scale factor. The consistent system positioning could be obtained with the suppressed INS error divergence by applying the IMU dead reckoning. To verify the performance of the proposed BS-RM model, three GNSS signal failure segments at different periods were randomly selected to evaluate the system. In addition, two GNSS failure segments were selected in the straight and curved roads respectively to further evaluate the performance of the CNN-LSTM assisted 21-dimensional GNSS/INS navigation system based on BS-RM. Compared with the traditional model of predicting position and velocity, the horizontal Distance Root Mean Square Error (DRMS) of BS-RM in the straight and curve tracks is improved by 83.85% and 88.06%, respectively, which confirms the improvement and consistent accuracy capability of the proposed method.
The aim of this paper is to focus on the metrization question in L-fuzzy sets. Firstly, we put forward an L-quasi (pseudo)-metric on the completely distributive lattice by comparing some existing lattice-valued metrics with the classical metric and show a series of its related properties. Secondly, we present two topologies: and , generated by an L-quasi-metric p with different spherical mappings, and prove if p is further an L-pseudo-metric on . Thirdly, we characterize an equivalent form of L-pseudo-metric in terms of a class of mapping clusters and acquire several satisfactory results. Finally, based on this kind of L-metric, we assert that, on , a Yang–Shi metric topology is , but an Erceg metric topology is not always so.
The aim of this paper is to focus on a fuzzy metric called Deng’s metric in -topology. Firstly, we will extend the domain of this metric function from to , where and M are defined as the sets of all special fuzzy points and all standard fuzzy points, respectively. Secondly, we will further extend this metric to the completely distributive lattice and, based on this extension result, we will compare this metric with the other two fuzzy metrics: Erceg’s metric and Yang-Shi’s metric, and then reveal some of its interesting properties, particularly including its quotient space. Thirdly, we will investigate the relationship between Deng’s metric and Yang-Shi’s metric and prove that a Deng’s metric must be a Yang-Shi’s metric on , and consequently an Erceg’s metric. Finally, we will show that a Deng’s metric on must be , and Deng’s metric topology and its uniform structure are Erceg’s metric topology and Hutton’s uniform structure, respectively.
A multi-constellation, multi-frequency Global Navigation Satellite System (GNSS) receiver is capable of simultaneously receiving signals from multiple satellite constellations across various frequency bands. This allows for increased observations, thereby enhancing navigation accuracy, continuity, effectiveness, and reliability. The spread spectrum code structures used in satellite navigation signals differ among systems. Compatible code generators are employed in multi-constellation, multi-frequency GNSS receivers to support tasks such as signal acquisition and tracking. There are three main types of spread spectrum code structures: Linear Feedback Shift Register (LFSR), Legendre sequences, and Memory codes. The Indian Regional Navigation Satellite System (IRNSS) released the L1-SPS (Standard Positioning Service) signal format in August 2023, which utilizes the Interleaved Z4-linear ranging code (IZ4 code) as its spread spectrum code. Currently, there is no universal code generator design compatible with the IZ4 code. In this paper, a proposed universal code generator is based on the hardware structure of the IRNSS IZ4 code generator. It achieves compatibility with all LFSR-based spread spectrum codes and enables parallel generation of multiple sets of GNSS signal spread spectrum codes, thereby improving hardware utilization efficiency. The proposed structure is implemented and validated using FPGA design, and resource consumption is provided as part of the validation results.