In order to improve the quality and efficiency of missile design, it would be better to take structure design into account during the prophase of missile preliminary design instead of later phase or detail design phase. This paper presents an approach to implement rapid design, modeling, and automated adjustment for missile body structures by describing missile body structures’ arrangement information and model information with parameters. A rapid missile body structure design module was developed based on NX environment and method above which can achieve rapid structure design, automated adjustment, as well as automated calculation and update of data such as mass, barycenter, and so on. Finally, an instance was presented to illustrate that this method is feasible and effective.
12 July 2019 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
The features on freeform surface are common in products with complex curved surfaces, such as gas film holes attached on turbine blade surface or pressing head on the multi-spots bending press. The freeform surfaces generally have tiny geometric structure, the large number and regular arrangement, which makes it hard to extract analysis parameters from CAD structures and construct equivalent analysis features. Therefore, the analysis models generation will be accelerated if parameters for analysis could be extracted automatically rather than manually. In this paper, the analysis-oriented parameter extraction problem is proposed and analyzed. The geometry pattern parameter and physical attribute parameter are summarized and defined as the research kernel based on common analysis scenarios. Based on Hough transform and k-means clustering method, a geometry pattern parameter extraction method is proposed, which can convert analytic criterion of extraction requirements into clear pattern recognition problems. A physical attribute parameter extraction method based on rule reasoning is also put forward to extract numeric analysis parameters with physical meanings. Finally, two representative cases are taken to illustrate the implementation steps of the proposed method, and to verify the effectiveness and practicability in engineering. The instance demonstrates that the proposed method could significantly reduce the time consumption of analysis model generation and improve the integration degree of CAD/CAE.
27 November 2019 in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
Film hole component is one of the most important cooling components in pipe-net calculation for blade design. However, owing to a large number of gas film holes, manual parameter configuration for film hole components will affect the efficiency of pipe-net calculation. Extracting parameters from the geometric structure of film holes automatically could significantly shorten the time consumption of pipe-net calculation. In this paper, numeric analysis parameter and group data required by film hole components were summarized and analyzed, based on which a parameter configuration strategy was proposed. Aiming at the extraction of group data, a film hole grouping method was presented. By converting the grouping requirements in fluid-heat analysis into a geometric row pattern recognition problem, it further redefines the geometric row as a linear distribution by a projection method and a parametric mapping method and finally solves the grouping problem by a linear search algorithm. A numeric parameter extraction method was put forward to redefine analysis parameters with geometric properties and identify certain geometry primitives. The proposed algorithm and method are verified with instances. The results illustrate that our method could shorten parameter configuration process of film hole component into several minutes from several hours in manual, with more reliable accuracy.
The Non-Uniform Rational B-spline (NURBS) surface not only has the characteristics of the rational Bézier surface, but also has changeable knot vectors and weights, which can express the quadric surface accurately. In this paper, we investigated new bounds of the first- and second-order partial derivatives of NURBS surfaces. A pilot study was performed using inequality theorems and degree reduction of B-spline basis functions. Theoretical analysis provides simple forms of the new bounds. Numerical examples are performed to illustrate that our method has sharper bounds than the existing ones.
Curve transition is a quintessential challenge in the realm of freeform curve modeling, extensively utilized for intricate product design endeavors. Nevertheless, conventional approaches to curve transition predominantly concentrate on the smoothness between the transitioning curves, often overlooking the potential for further refining the curves' shape. In this study, we introduce an innovative plane curve transition technique that incorporates constraints related to reference shapes, with the objective of ensuring that the transitioning curves' shapes closely mimic the reference curve, all while adhering to the G2 continuity criterion. To achieve this, we have developed a G2 continuous transition curve model that incorporates four shape adjustment parameters, constructed from quintic Bézier curves. Subsequently, we have formulated and resolved a shape similarity function that quantifies the resemblance between the transition curve and the reference curve, grounded in the concept of quasi-curvature. Furthermore, we have devised a strategy for accurately determining the initial parameters of the reference curve, which addresses the common engineering dilemma of imprecise reference curve range specifications. The efficacy and applicability of our proposed method are substantiated through a series of numerical experiments and a blade restoration task, showcasing its robustness and practical utility in industry applications.