In this paper, we report synthesis of nano-crystalline diamond (n-C diamond) films using DC-plasma assisted hot filament chemical vapor deposition. The films are characterized by Raman spectroscopy, scanning electron microscopy, and atomic force microscopy. The films were found to be uniform and well adherent to crystalline ⟨100⟩ and ⟨111⟩ on silicon substrates. Comparative studies were carried out using field emission microscopy and conductive atomic force microcopy to investigate the mechanism of electron transport across the n-C diamond films in far field and near field geometries. The former is important in the context of field emission display devices, and the latter is important as a gate electrode for field effect transistors. The I–V characteristics in both the cases obeyed the Fowler–Nordheim equation. Various parameters, viz., turn-on voltage, threshold voltage, and field enhancement factors, were estimated. The power spectral density of noise in field electron emission current exhibited P(f) = A·I2/f2 behavior. The results are discussed in the light of the present understanding of the mechanism of field emission from n-C diamond films.
13 March 2024 in Journal of Radioanalytical and Nuclear Chemistry
Tin oxide (SnO2) is a promising semiconducting material for use in dye-sensitized solar cells (DSSCs) as a potential alternative to titanium dioxide. Its advantageous properties, such as a wide energy bandgap, excellent photostability, and high charge carrier mobility, make it a suitable candidate for photovoltaic applications. In this study, we report the synthesis of SnO2 nanoparticles with sizes ranging from 5 to 20 nm using the co-precipitation method. The synthesized nanoparticles were thoroughly characterized using various analytical techniques to evaluate their structural, crystallographic, and electronic properties. X-ray diffraction was employed to assess crystallinity, while scanning electron microscopy and Raman spectroscopy were used to investigate morphological and structural features. UV-visible spectroscopy was utilized to determine the bandgap of the material. In addition, transmission electron microscopy and x-ray photoemission spectroscopy were conducted to gain deeper insights into the nanoparticle morphology and surface chemistry. For the fabrication of photoelectrodes, a simple yet effective doctor blade method was employed. The photoelectrodes were sensitized with Rhodamine B (Rh-B) dye and subsequently characterized for their performance in DSSCs. Under one-sun illumination conditions, the SnO2-based photoanode sensitized with Rhodamine B (Rh-B) dye demonstrated a solar conversion efficiency of ∼0.78%. These findings highlight the potential of SnO2 nanoparticles as a viable material for DSSC applications and provide a foundation for further optimization of their photovoltaic performance.
In the present manuscript, we have investigated the fluctuations in the tunneling current (noise) from vertically aligned Carbon nanotube (CNT) emitters using home-built tuning-fork based Scanning Tunneling Microscopy/Spectroscopy (tf-STM/S). The fluctuations in the tunneling current are recorded in near field geometry (i. e. tunneling geometry, the distance between tip and CNT emitters is ∼1 nm) and in far field geometry (i.e. Fowler-Northeim tunneling (F-N), the distance between tip and CNT emitters is ≥100 nm). The recorded fluctuations in the tunneling current for near field are showing a Random Telegraphic Noise (RTN) and extrinsic 1/f type noise for various time domains. An observed fluctuation is explained with plausible mechanism of a two-level on-off trap state model. The average lifetime for the on state is τ1 = 3.36 sec, and for the off state τ2 = 0.89 sec. The calculated trap energy level is ΔE = 0.034 eV. The calculated slope from the power spectral density plot ∼1.9 for RTN, and ∼1.1 for extrinsic 1/f type noise. Furthermore, the extrinsic 1/f type noise is observed in the tunneling current recorded in far field geometry, where the tunneling current is generated by tunneling of electrons through a triangular barrier. The calculated slope from power spectral density plot is ≈1.0. The understanding of noise from surface interface of CNTs is important in different tunneling geometries for device applications.