Expansive soils exhibit detrimental swelling and shrinking characteristics in response to variations in water content, posing a threat to engineering safety. Utilizing industrial solid waste for improving the engineering properties of expansive soil presents a promising solution due to its low pollution and high recoverability. This paper reviews the progress of research on various industrial solid wastes in stabilizing expansive soil. The review comprehensively discusses the microscopic characteristics and mechanism of industrial solid waste-stabilized soils, as well as their impact on the compressive strength, shear, compaction characteristics, consistency, swelling and shrinkage properties, and durability of expansive soils. The addition of appropriate curing agents or the combination with other stabilizing materials can enhance the strength of expansive soil, mitigate volume changes, and improve the durability and stability of expansive soils. The mechanisms of stabilization of expansive soils by industrial solid waste involve cation exchange, flocculation-agglomeration, pozzolanic reaction, and carbonation. Additionally, microscopic characterization analysis reveals that the formation of C-S-H and C-A-H is the primary contributor to the improvement of soil geotechnical properties.
2 April 2021 in International Journal of Concrete Structures and Materials
The knee beam–column joint is a critical location in a Reinforced Concrete (RC) structure particularly when subjected to earthquake vibrations. The current structural design codes dictate the use of high amounts of steel reinforcements in the frame joint to manage large strain demands in seismic-prone regions. However, these codes could result in the congestion of steel reinforcements in the limited joint area which can consequently produce numerous construction complications. This study aims to improve the structural performance of Knee Joint (KJ) by reducing the load induced to the embedded steel reinforcements during seismic vibrations. Hence, this study attempted to develop a Hybrid Fiber Reinforced Concrete (HyFRC) by combining multiple synthetic fibers to be introduced onto KJ. Six KJ specimens were cast using five developed HyFRC materials and one Control specimen to be experimentally tested under lateral cyclic loading. The results indicated significant improvements for the HyFRC KJ specimens particularly in energy dissipation capacity, stiffness degradation rate, displacement ductility toughness, steel reinforcement strain and hysteretic behavior. A total of six Finite Element (FE) KJ models were developed using the HyFRC materials to verify the results from the experimental testing. The accuracy of the proposed FE models resulted in average percentage differences of 25.89% for peak load, 3.45% for peak load displacement and 0.18% for maximum displacements from the experimental data. In conclusion, this study developed HyFRC materials that are beneficial in providing cost-efficient alternatives to Reinforced Concrete (RC) KJ structures in areas with low to moderate level of seismic risks.
The global market for tires is ever-growing, and partially replacing sand with crumb rubber (CR) as fine aggregates in concrete could reduce environmental pollution. However, the main barrier to the complete usage of recycled tire crumbs in construction is the deterioration effect of CR on the mechanical properties of cement-based composites. Therefore, this paper attempts to improve the fresh and hardened properties of crumb rubber mortar (CRM) by incorporating polypropylene-polyethylene synthetic fibers with coconut and kenaf natural fibers as reinforcements. A total of 18 mix designs were developed with varying fiber combinations and rubber crumb replacement. Subsequently, parametric studies with chemical admixture were conducted at 3, 7, and 28 days to improve the flowability and resulting mechanical properties of the fiber-reinforced CRM. According to the results, the single and hybrid fibers positively improved the mechanical properties of cement mortar at 5–15% CR replacement. It can be concluded that adding single and hybrid fibers enhanced the performance of cement mortar modified with tire crumb rubber aggregates by providing varying degrees of improvement.
The use of fibers in cement composites has been shown to improve the mechanical properties of concrete through the fiber-bridging effect, which implies the fiber’s crack-resisting property. Additionally, the combination of two or more different fibers in the concrete mixture yielded better strength than the individual fibers due to its more versatile applications. Therefore, this study was conducted to investigate the combination of multiple synthetic fibers to improve the concrete residual strength and evaluate the hybridization synergistic effect. Ferro macro-sized fiber (FF) as the primary load-bearing fiber and four different secondary synthetic microfibers comprising Ultra-Net (UN), Super-Net (SN), Econo-Net (EN), and Nylo-Mono (NM) were utilized to develop a total of 16 hybrid fiber reinforced concrete (HyFRC) combinations and the performance were compared against their single-fiber counterpart. The tensile strength, bonding power, physical form, length, and volume fraction of the fibers were measured under the ASTM C1399 test standard in order to calculate the average residual strength (ARS) of concrete in the post-cracking region as well as to assess the synergistic effect of the fiber combination. The results recorded positive fiber synergy for all specimens tested. In addition, the Ferro-Nylo, Ferro-Super, Ferro-Econo, and Ferro-Ultra hybrids improved the ARS compared to the controlled specimens by 20.41, 10.2, 7.48, and 6.12%, respectively.
Hybridization of fibers in concrete yields a variety of applications due to its benefits compared to conventional concrete or concrete with single type-fiber. However, the Finite Element (FE) modeling of these new materials for numerical analyses are very challenging due to the lack of analytical data for these specific materials. Therefore, an attempt has been made to develop Hybrid Fiber Reinforced Concrete (HyFRC) materials with High Range Water-Reducing Admixture (HRWRA) during the concrete mixing process and conduct experimental study to evaluate the behavior of the proposed materials. Constitutive models for each of the materials are formulated to be used as analytical models in numerical analyses. The acquired data are then used to formulate mathematical equations, governing the stress–strain behavior of the proposed HyFRC materials to measure the accuracy of the proposed models. The experimental testing indicated that the Ferro with Ferro mix-combination improved the performance of concrete in the elastic stage while the Ferro with Ultra-Net combination has the highest compressive strain surplus in the plastic stage. In tension, the Ferro with Ferro mix displayed the highest elastic behavior improvement while the Ferro with Ultra-Net designs proved superior in the plastic range, providing additional toughness to conventional concrete.