Two-dimensional materials based on transition metal carbides have been intensively studied due to their unique properties including metallic conductivity, hydrophilicity and structural diversity and have shown a great potential in several applications, for example, energy storage, sensing and optoelectronics. While MXenes based on magnetic transition elements show interesting magnetic properties, not much is known about the magnetic properties of titanium-based MXenes. Here, we measured the magnetic properties of Ti3C2Tx MXenes synthesized by different chemical etching conditions such as etching temperature and time. Our magnetic measurements were performed in a superconducting quantum interference device (SQUID) vibrating sample. These data suggest that there is a paramagnetic-antiferromagnetic (PM-AFM) phase transition and the transition temperature depends on the synthesis procedure of MXenes. Our observation indicates that the magnetic properties of these MXenes can be tuned by the extent of chemical etching, which can be beneficial for the design of MXenes-based spintronic devices.
In this work, the effects of arsenic (As) flux used during gallium (Ga) seed droplet consumption and the post-growth annealing on the optical, electrical, and microstructural properties of self-catalyzed molecular beam epitaxially grown tellurium (Te)-doped GaAs nanowires (NWs) have been investigated using a variety of characterization techniques. NWs using the same amount of As flux for growth of the seed droplet consumption demonstrated reduced density of stacking faults at the NW tip, with four-fold enhancement in the 4K photoluminescence (PL) intensity and increased single nanowire photocurrent over their higher As flux droplet consumption counterparts. Post-growth annealed NWs exhibited an additional low-energy PL peak at 1.31 eV that significantly reduced the overall PL intensity. The origin of this lower energy peak is assigned to a photocarrier transition from the conduction band to the annealing assisted Te-induced complex acceptor state (TeAsVGa−). In addition, post-growth annealing demonstrated a detrimental impact on the electrical properties of the Te-doped GaAs NWs, as revealed by suppressed single nanowire (SNW) and ensemble NW photocurrent, with a consequent enhanced low-frequency noise level compared to as-grown doped NWs. This work demonstrates that each parameter in the growth space must be carefully examined to successfully grow self-catalyzed Te-doped NWs of high quality and is not a simple extension of the growth of corresponding intrinsic NWs.
Here, we describe a set of experiments that enables undergraduate students to perform and understand nucleation and growth utilizing the concept of birefringence. Semicrystalline polymers, e.g., polyethylene oxide, exhibit a Maltese cross extinction pattern when they are imaged under polarizing optical microscopy with crossed polars (i.e., two polarizers whose axes are oriented at right angle to each other). This behavior is due to the birefringence of the polymer's spherulite, which is its building block, analogous to the grains of a metal. In this instructional laboratory experiment, samples of polyethylene oxide were crystallized at three different transformation temperatures of 295, 273, and 77 K. Taking advantage of the birefringence of spherulites, the dependence of the microstructure with undercooling is shown. In particular, smaller spherulite sizes were obtained with larger undercoolings. It is also shown that the temperature dependence of the resulting polymer microstructure is in agreement with the analytical model for a nucleation and growth process. Finally, a live transformation of solidification of polyethylene oxide from the melt was recorded under crossed polars at room temperature via video microscopy. The time-dependent data that describe the advancement of the phase transformation are in excellent agreement with the Avrami model.
We present a systematic investigation of the detailed structural, optical and magnetic properties of ZnO thin films deposited by pulsed laser deposition as a function of varying Al doping from 0% to 5%. The observed features can be associated with strain introduced into the ZnO lattice by the incorporation of Al. Enhanced optical transmittance values close to 95% were achieved in Al-doped ZnO epitaxial films deposited on sapphire substrates. In addition, these films exhibit robust ferromagnetic properties at room temperature with saturation magnetization that varies from 143 to 63 emu/cm3 for Al dopant concentrations from 0% to 5%. It is demonstrated that the saturation magnetization is related to the strain introduced into the lattice with increased Al doping.