The oil and gas industry regularly uses Type 25Cr super duplex stainless steels (SDSS) for components exposed to seawater and hydrocarbon environments in topside facilities, downhole, and subsea equipment. Much debate still exists concerning the effect of tungsten on pitting and crevice corrosion resistance, particularly in standardization committees. Whereas some researchers claim that tungsten has a strong synergistic effect with molybdenum when added above a certain threshold value, others argue that tungsten additions at the expense of molybdenum could lower corrosion resistance. The objective of this investigation was to examine the effect of tungsten on localized corrosion of two super duplex stainless steels: a low-W (modified UNS S32750) and a high-W (UNS S39274) grade. Both crevice-free and creviced samples were studied. Tests were conducted in 3.5 wt% NaCl or natural seawater with temperatures ranging from 20°C to 95°C. Various independent methodologies including cyclic potentiodynamic polarization, electrochemical critical pitting temperature testing per ASTM G150, and long-term open-circuit potential exposure in natural seawater were used. Results showed that, in the solution annealed condition, tungsten additions to super duplex stainless steels had a marked positive effect on pitting and crevice corrosion resistance, increasing critical crevice temperatures by as much as 30°C. These findings suggested that tungsten-containing SDSS had a corrosion resistance on par with super austenitic stainless steel grades containing 6 wt% molybdenum. A new parametric definition of the pitting resistant equivalent is proposed to reflect the alloy’s localized corrosion resistance and to support standardization efforts in the materials oil and gas community.
Super Duplex Stainless Steels (SDSS) have excellent corrosion resistance due to their high concentration of alloying elements like Cr, Mo, and N. There is still, however, disagreement on the role of tungsten in the corrosion resistance of stainless steels. In this regard, the influence of tungsten on tertiary phase precipitation kinetics remains a chief source of controversy. In this study, three different SDSS with different tungsten contents have been investigated, namely, UNS S32750 (W-free), S32760 (0.6 wt% W), and S39274 (2.1 wt% W). Different isothermal aging conditions were studied, followed by microstructure characterization using scanning electron microscopy, energy dispersive X-ray spectroscopy, electron backscatter diffraction, and transmission electron microscopy to quantify the type and volume fraction of tertiary phases and intermetallic compounds. Time-Temperature-Transformation-Corrosion maps were constructed by quantifying the changes in pitting corrosion resistance caused by the precipitation of incremental amounts of deleterious phases. Results showed that 2.1 wt% W additions retarded the precipitation kinetics of all tertiary phases—includingσ-phase—favoring the formation ofχ-phase. Bothχ- andσ-phase affected corrosion resistance, reducing the critical pitting temperature by 10 °C–20 °C at concentrations well below 1 vol%.